Had a flat, so I had to remove the rear wheel. This is how I did it, it is quite easy. Didn't video changing the tire itself, plenty of great videos out there!
I appreciate the quick video! Very direct/ On point and without the amateur comedy “Look what I can do!” hour most vids seem to include! The torque specifications was a much needed bonus. Thank you so much.
Thank you once again Alex, another excellent video and love the fact there is no annoying and unnecessary commentary. Torque settings shows you are thinking about your viewers and what they need to know. Time for new tyres on my XMAX so this is perfect. Love yourr work Sir!!
It's way easier to use the rear brake to hold the wheel while removing & installing the axle nut. Just change up the order of operation a bit with the caliper.
nail in rear tyre of my 4 month old xmax - 150 bucks quote to repair (mostly labour, removing and refitting wheel) you just saved me $100. Thanks for the easy to follow video!
Good tutorial. I thought I'd take a look at mine. It seemed to have more play than it should and sometimes made a noise. Being a novice to scooters and rider I took it to the dealer I bought it from (used) to check and they said maybe the normal belt noise. After seeing this it was obvious....no nut on the axle! Maybe a life saver.
Hay Alex bro. This is very great work video, Many of my XMAX300 refer to yours, I hope and look forward to seeing more of your videos. ( this is google translate)
Thanks for the class explanation of changing the rear wheel. I also need to change the rear wheel on my Piaggo x10 350, is this the same as your procedure?
Ich habe heute mein Hinterrad ausgebaut. Dabei ist mir aufgefallen das daß Abgasrohr bzw. der Abgasskrümmer sehr locker ist bzw. Schon sehr locker war. Ist das normal so ?In dem Werkstatt Handbuch auf Kapitel 2 Seite 23 gibt es eine eine Dichtung an dem Abgasskrümmer Flansch ich habe das diese Vielleicht verloren habe, weil mein Auspuff schon länger Zeit viel Lauter ist als früher. Vielen Dank für die Antwort und Beste Grüße
I have two medleys. I need to learn to do this to save trouble. Nobody posts anything about Piaggio Medleys. Hard to learn stuff for my scooters. I wonder if this is similar to mine? Already remove the muffler and calipers to service myself, but not gone any further than that
@@bikesmith ok thanks yea i grease the back axle but now When i ride it i hear a noise i think my brake drum or brake hub always seem like its loose if you know what peice im talking about
I appreciate the quick video! Very direct/ On point and without the amateur comedy “Look what I can do!” hour most vids seem to include! The torque specifications was a much needed bonus. Thank you so much.
I like how you work...very efficient and methodical. Great vid.
Just bought xmax 300. Thank you for recording!
Thank you once again Alex, another excellent video and love the fact there is no annoying and unnecessary commentary. Torque settings shows you are thinking about your viewers and what they need to know. Time for new tyres on my XMAX so this is perfect. Love yourr work Sir!!
Actions speak louder than words 😉👍 great video as always.
It's way easier to use the rear brake to hold the wheel while removing & installing the axle nut. Just change up the order of operation a bit with the caliper.
I guess, but doing it alone I feel this this the best approach
nail in rear tyre of my 4 month old xmax - 150 bucks quote to repair (mostly labour, removing and refitting wheel) you just saved me $100. Thanks for the easy to follow video!
Cost me £30 to get a screw taken out and hole plugged,that was without removing the rear tyre,car tyre fitters usually charge £15 for a car tyre
Alex at 4x speed.... must be some really great coffee Bro! LOL As always great job and well edited. Cheers!
You know me, always on the cutting edge of espresso technology!
Thanks, best video so far, for this procedure
Great work and video - thanks, mate!
Excellent tutorial. Subscribed!
Good tutorial. I thought I'd take a look at mine. It seemed to have more play than it should and sometimes made a noise. Being a novice to scooters and rider I took it to the dealer I bought it from (used) to check and they said maybe the normal belt noise. After seeing this it was obvious....no nut on the axle! Maybe a life saver.
Hay Alex bro. This is very great work video, Many of my XMAX300 refer to yours, I hope and look forward to seeing more of your videos. (
this is google translate)
Bellissimo video!
Molto chiaro e con in più le coppie di serraggio... bravissimo!! 😄
Spot on! I couldn't find the torque settings anywhere else!
Same got the hondas manual no torque spec just basic stuff. In Suzuki manual for me gsxr you got everything
Thank you. Your video is well done and helpful.
Acetone, nail polish remover, is great for removing old thread locker. Give it a 20 minute soak, and it falls right off.
Great Video. Shows everything you need to do it, without annoying music and crazy talking.
Great video!
Respekt nearly perfect work!! Best wish Reiner from Germany
Mais um excelente video. 👍
Thanks for the class explanation of changing the rear wheel. I also need to change the rear wheel on my Piaggo x10 350, is this the same as your procedure?
Well done, no bs.
Brilliant video thanks 😃
Thanks, great instruction.
Very good video! Maybe would be also good write down name of vaseline to use. I know you're showing, but not everywhere are selling the same.
Perfect! Thanks.
Ich habe heute mein Hinterrad ausgebaut. Dabei ist mir aufgefallen das daß Abgasrohr bzw. der Abgasskrümmer sehr locker ist bzw. Schon sehr locker war. Ist das normal so ?In dem Werkstatt Handbuch auf Kapitel 2 Seite 23 gibt es eine eine Dichtung an dem Abgasskrümmer Flansch ich habe das diese Vielleicht verloren habe, weil mein Auspuff schon länger Zeit viel Lauter ist als früher.
Vielen Dank für die Antwort und Beste Grüße
nice
Thank you sir, good one!
Bom dia.Essa tinta que você usou foi de alta remperatura?Teria como passar o link. Video excelente,parabéns,!
Uso tinta para lareiras, funciona particularmente bem
Is this kmyco xciting s400? What socket size is the axle nut?
I have two medleys. I need to learn to do this to save trouble. Nobody posts anything about Piaggio Medleys. Hard to learn stuff for my scooters. I wonder if this is similar to mine? Already remove the muffler and calipers to service myself, but not gone any further than that
Sometimes there are specific methods to some models for removing the back wheel.
Try finding the workshop manual for your model
A don't no how tye back end came off so easy. Normally you need a wheel outlet tool
Como nueva
How do you know what NM each bolt needs ?
Factory manual
hey i have a question do you out grease on the back axle
Not sure if I understand your question but I do grease the back axel
@@bikesmith ok thanks yea i grease the back axle but now When i ride it i hear a noise i think my brake drum or brake hub always seem like its loose if you know what peice im talking about
Helpful.
Hi,what year this model?
19
Merhaba tork değerleri yazılı bir kılavuz var mı nerden bulabilirim
They are listed on the factory workshop manual
@@bikesmith Türkçe kılavuzda tork değerleri bulunmuyor link paylaşabilirmisiniz
@@bikesmith can you share link for the manual?
I’d be greatly obliged if you could sell your Xmax and buy a Forza 350!
Who knows?
For now, @40k km I'm ver happy with the Xmax!