the glass on this printer is the ultrabase type coat, so you have to wait to remove the print, and let the heatbed cool down. You probably already know this; but i was just reminding you.
Yes, we know but still it was not easy to remove after cool down. One advantage of the masking tape is that we don't need to wait for the glass to cool down to start a new print. This is very handy when testing/dialing in a printer.
Obrigado Rui pelo belo vídeo apresentando os defeitos que geralmente os sistemas produtivos sem "QUALITY ASSURANCE" fazem chegar ao consumidor final. Também já aprendi que é imprescidível fazer uma inspecção detalhada aos produtos que apesar de terem fichas de "QUALITY CONTROL" não garantem a dita qualidade final. E é mesmo uma pena como é o caso das duas impressoras 3D da Artillery, que com uns toques de especialista tornam-se em belíssimas máquinas a um preço imbatível. Comprei as duas manas desta marca em 11.11 (a grande) por 310 paus e a pequena ,hoje, por 240€. Tiveste também mesmo muito azar com a Genius mas é a nossa sorte seguidores do teu canal, aprendemos a ter os olhos bem abertos, evitando males maiores antes de se ligar à tomada.😎
I received my Genius from the "new batch" today. No issues at all, flatcables and connectors where all fine, the threaded rods where lubricated pretty well in the factory and all nuts were decently tightened (tightened them some more to be sure :P), belts are ok too (after tightening) maybe i was lucky but the one i received is awesome :D my first prints out of the box where awesome.
Have you managed to solve the horizontal line issue you mention in the video? I'm trying everything possible (slicer settings, mechanics, esteps) for over a week already with no luck, and I see it on many prints done with Artillery Genius, that other people show. Looks like a very common problem
The prints look way bettet than with the sidewinder. The components are more or less the same - I wonder what‘s the Problem with the sidewinder then.. size?
The sidewinder was their first printer design, i think the early reviews have software and hardware issues as is typical for new releases by Chinese companies. The later versions of the x1 have fixes afaik.
@@theunboxers24 Information, that's what you get watching these channels and it's up to us to set up our minds for the purchasing moment. Please read whole post on the contents of the video specially the paragraph before " Ender 3" affiliated link!!!
Bom dia Tiago. Essa impressora é uma boa opção, no entanto, a nossa (primeiro batch) veio com o problema de uneven layers. O fabricante, desde então, já fez várias alterações e já conta com várias versões. Não testamos ainda a mais recente mas caso o problema principal de uneven layers esteja resolvido, é uma boa opção.
Boa tarde Tiago. Reparei agora que estava a referir-se á Genius e não á sidewinder. O que eu referi de uneven layers era sobre o modelo artillery e não a genius.
the glass on this printer is the ultrabase type coat, so you have to wait to remove the print, and let the heatbed cool down. You probably already know this; but i was just reminding you.
Yes, we know but still it was not easy to remove after cool down. One advantage of the masking tape is that we don't need to wait for the glass to cool down to start a new print. This is very handy when testing/dialing in a printer.
Obrigado Rui pelo belo vídeo apresentando os defeitos que geralmente os sistemas produtivos sem "QUALITY ASSURANCE" fazem chegar ao consumidor final. Também já aprendi que é imprescidível fazer uma inspecção detalhada aos produtos que apesar de terem fichas de "QUALITY CONTROL" não garantem a dita qualidade final. E é mesmo uma pena como é o caso das duas impressoras 3D da Artillery, que com uns toques de especialista tornam-se em belíssimas máquinas a um preço imbatível. Comprei as duas manas desta marca em 11.11 (a grande) por 310 paus e a pequena ,hoje, por 240€. Tiveste também mesmo muito azar com a Genius mas é a nossa sorte seguidores do teu canal, aprendemos a ter os olhos bem abertos, evitando males maiores antes de se ligar à tomada.😎
Thinking about buying this printer. But does the broken solder joints happen often or just on yours?
Hi Rake, the genius has it's own facebook group so most of the users will report there.
I received my Genius from the "new batch" today. No issues at all, flatcables and connectors where all fine, the threaded rods where lubricated pretty well in the factory and all nuts were decently tightened (tightened them some more to be sure :P), belts are ok too (after tightening)
maybe i was lucky but the one i received is awesome :D
my first prints out of the box where awesome.
Nice looking prints. I was impressed with the detail of the baby yoda's teeth
manda porfa el stl o link... gracias
The STL link is in the video description
Hey Rui. Did you figure out what causes the uneven layers? I’m facing the same issues and I’m suspecting its the Y axis
Hi, very nice explanations of what the Genius is. But which settings can be applied in Cura slicer? Thanks for your help.
Hi, we use S3D insteadl. If you want to check our profile, you can download this and many others on our patreon page.
@@ruiraptor Thank you ;)
Hi there, can you please tell me the settings for CURA for this GENIUS printer, please?
Hi, sorry but we only use S3D.
Get on Facebook and join an official group.
Try to learn more here too. Search for slicer profile at Dr. Vax i.e. and many others
Thanks! Nice review as usual...and as usual Sandra as made all the work ^^ lol The benchy got a very nice result !
Are you using cura slicer.?
Can you share your profile..?
Hi, we are using S3D. If you need the S3D profile, send us an email and we will reply with the profile attached.
Mine came with strain relief, different z rod couplers, no dust.
whats a z rod coupler
Have you managed to solve the horizontal line issue you mention in the video? I'm trying everything possible (slicer settings, mechanics, esteps) for over a week already with no luck, and I see it on many prints done with Artillery Genius, that other people show. Looks like a very common problem
Hi, we managed to reduce but not eliminate it completly. We tried many things as we mentioned in the video description.
Hallo, kann der Genius auch 0,2er Nozzel nutzen? Wenn ja, welche empfiehlst Du?
Danke. 🖖
I ordered mine a week ago and hope it will arrive before xmas :D
hopefully i won't receive a lemon with broken connectors and dirt like you did :P
The prints look way bettet than with the sidewinder. The components are more or less the same - I wonder what‘s the Problem with the sidewinder then.. size?
If you look other Videos you will sie the Mainboard cooling is bad. The Board and the steppers need much more airflow.
The sidewinder was their first printer design, i think the early reviews have software and hardware issues as is typical for new releases by Chinese companies. The later versions of the x1 have fixes afaik.
@@SshanIcsS Cooling doesn't help printquality on mine. I guess it's extruder and temp related.
@@malloott I have V4 :)
@@magicmaui77 good to know, the reviews and comments on that thing are so varied that at this point I now have no clue if it's a good machine..
So, no strain relief and you believe it will pull off ' Thats not good , there's a probably an obvious fault before selling it ?
Monty, we are not sellers. We only review the printers.
@@theunboxers24 Information, that's what you get watching these channels and it's up to us to set up our minds for the purchasing moment. Please read whole post on the contents of the video specially the paragraph before " Ender 3" affiliated link!!!
és português né?
Sim, correcto.
@@ruiraptor de qualquer das maneiras
Achas que no price point de 250 a 350 €, em que está impressora se encontra, há alguma melhor oferta?
Bom dia Tiago. Essa impressora é uma boa opção, no entanto, a nossa (primeiro batch) veio com o problema de uneven layers. O fabricante, desde então, já fez várias alterações e já conta com várias versões. Não testamos ainda a mais recente mas caso o problema principal de uneven layers esteja resolvido, é uma boa opção.
@@ruiraptor Bom dia
Vou procurar então no bangood e gearbest para ver qual destes é que tem a versão mais recente
Muito obrigado
Boa tarde Tiago. Reparei agora que estava a referir-se á Genius e não á sidewinder. O que eu referi de uneven layers era sobre o modelo artillery e não a genius.
no printer sounds, reee
Looks like all the Chinese printers have their problems
What are they trying to tell us! EVEN a queen an put this machine together.
this looks like absolute thrash thank you for convincing me not to buy this shit
It’s actually a great printer and highly reviewed.
Awesome and silent printer.
Wowwwww... lucky i did not go for this printer. Terrible quality