had an MBRP on an old Focus ZX3 hatchback and I loved the sound of it. lots of people always asked what it was. Awesome that I can support a Canadian company as well.
Using this same exhaust on my gf 2012 volvo c30 T5 so easy to interchange parts and reweld a few hanger here and there but man the car sounds so good. The price was also better than buying something from actual volvo parts seller so much cheaper
I just Installed this xp series and I love the way it sounds but it does drone quite a bit when at about 3k rpm not sure if I installed the resonator wrong or not but was thing of adding a straight through resonator before the rear axle
I have this exhaust on my focus RS. It sounds way better than stock obviously but it could be better. I wish I had just got the scorpion cat back. This exhaust drones a lot on higher rpms. It’s not unbearable but it does drone. My RS buddy’s have mountune and borla exhausts. Once I get the car making the right power I will change this system.
Any check engine light without exhaust valve, and can you use the sport mode trake mode and drift mode with mbrp exhaust make video so we can see it please
Right before they show off the car finished they show that they add a thing onto the cable for the flap that's in the stock system that fakes it out so you don't have any lights on.
The awe track edition is pretty loud. I also have a CPE Catless downpipe. I had the mbrp on my car when I bought it. I’m thinking of going back to the mbrp.
What got me was the 409 stainless... typically 4XX series stainless is stronger but lacks corrosion resistance. The 3XX series stainless has great corrosion resistance due to more chromium and nickel but has to be tig welded. Basically its CHEAP.... hence $550 vs $1100 for a Borla... You get what you pay for.
jus wait till u put a downpipe on . if its loud before downpipe it will be to loud flr me i think this will sound good paired with downpipe and not be to loud cause some systems for the rs can be to loud and obnoxious
Dylan Knight the valve had nothing to do with that. It was meant to reduce noise while driving in "normal" mode. The valve would stay closed. If you used any other mode the valve would open. The pops and bangs are from the engine ultimately.
that rs is one beautiful piece of machinery.
a tip: watch movies at flixzone. I've been using it for watching all kinds of movies these days.
@Alonso Rayan Definitely, I have been watching on Flixzone for since december myself :)
I installed this exhaust on my wife's RS and really like the deep tone.
Mike Tarlton damn your wife has a RS that’s so awesome mine can’t even drive standard and don’t want to learn and hates sports cars
I know these vids take time to produce - thank you for doing all these guys.
We appreciate you subscribing and watching!
had an MBRP on an old Focus ZX3 hatchback and I loved the sound of it. lots of people always asked what it was. Awesome that I can support a Canadian company as well.
Subscribed! I had an MBRP on my 2000 Focus ZX3 and loved it. The car is still going strong. The RS just might be next!
My72MGB same here. Had the 2.5 " on my 2000 ZX3. loved the sound of it!!
From past MBRP stuff, I wasn't expecting to actually think much of it at all, but I actually like this one.
Definitely gonna pick one up from you guys soon!! sounds great!!
Using this same exhaust on my gf 2012 volvo c30 T5 so easy to interchange parts and reweld a few hanger here and there but man the car sounds so good. The price was also better than buying something from actual volvo parts seller so much cheaper
Im doing the same thing on my 2011 Volvo c30 r design
Sounds great can't wait to get one!!
Decent sounding pipes
The scorpion exhaust would be my #1 pick
Nice Tudor !
I just Installed this xp series and I love the way it sounds but it does drone quite a bit when at about 3k rpm not sure if I installed the resonator wrong or not but was thing of adding a straight through resonator before the rear axle
Tudor Pelagos watch! Good taste, that man!
As always, wonderful videos. Thank you for sharing. Do you ever recommend wiping the stainless down, so fingerprints don't burn onto it?
start up and revs begin at 11:07
Great video! Looks like a great kit. How about a resonator delete sound clip?
I have this exhaust on my focus RS. It sounds way better than stock obviously but it could be better. I wish I had just got the scorpion cat back. This exhaust drones a lot on higher rpms. It’s not unbearable but it does drone. My RS buddy’s have mountune and borla exhausts. Once I get the car making the right power I will change this system.
I'm excited to see this exhaust on the RS even thought I don't one an RS lol
Sweet!
Do we have to use the resonator
What’s the exhaust called?
Any check engine light without exhaust valve, and can you use the sport mode trake mode and drift mode with mbrp exhaust make video so we can see it please
kevin Richardson i have this exhaust and all modes work fine. No warning lights. No effect on your drive modes.
Right before they show off the car finished they show that they add a thing onto the cable for the flap that's in the stock system that fakes it out so you don't have any lights on.
Does this actually need to be cut?
Bill - which bov was on the car at the time? Sounds nice
it has the CPE exhale kit on it.
+Bill Tumas is the hks or tial blow off valve with the cpe kit? Thx
Tial
Bill do u recommend this exhaust or AWE TRACK exhaust for the RS? also which of the 2 has a deeper sound an sounds better overall please
Still waiting on a response please
The awe track edition is pretty loud. I also have a CPE Catless downpipe. I had the mbrp on my car when I bought it. I’m thinking of going back to the mbrp.
What's up with the quality of the stainless 2.5 months old and pretty much covered with surface rust!! Prob gonna be an issue in the future
What got me was the 409 stainless... typically 4XX series stainless is stronger but lacks corrosion resistance. The 3XX series stainless has great corrosion resistance due to more chromium and nickel but has to be tig welded. Basically its CHEAP.... hence $550 vs $1100 for a Borla... You get what you pay for.
What size socket do I use on the v-band clamp? (3:36) deep 15 or 16?
Love MBRP, but dear god update your clamps to V band clamps.....
pz look to making something for hybrid cars , like the 2015 ford c max hybrid.
What's the weight difference between that and stock?
misterchonger I'm not exactly sure the exact savings but the new muffler is significantly lighter than the OEM muffler, no question
Why do they not offer downpipes....?
Been told Borla will have one very soon!!!!
My band clamps leaks liquid when starting a bit is that normal?
It is pretty common, just make sure they are tight.
Sounds good but fail on no 304 stainless and no active valve option, MBRP got the sound but that’s about it
Good instructional video as always though
jus wait till u put a downpipe on . if its loud before downpipe it will be to loud flr me i think this will sound good paired with downpipe and not be to loud cause some systems for the rs can be to loud and obnoxious
Just an FYI to future buyers... you get what you pay for everytime. Make smart decisions with your $40,000 Focus...
I would prefer the original sounds like the. Pop sounds it’s unique
First
glad im not the only one who doesnt like that stupid fake exhaust valve thing ford put on the rs for fake pops and crackles.
Dylan Knight the valve had nothing to do with that. It was meant to reduce noise while driving in "normal" mode. The valve would stay closed. If you used any other mode the valve would open. The pops and bangs are from the engine ultimately.
The pops and crackles are 100% real... I have a muffler delete on mine and it pops and crackles like crazy when its warmed up
dumb comment when you can clearly hear the car pop and crackle with the aftermarket exhaust...
Dumb comment. How the fuck do you have fake pops and crackles lmao.
Stewart Rolen. Do you like your muffler delete ? Any problems yet ?
To many pieces
Way too much work to put an exhaust on
No more work than any other catback I've ever seen on any vehicle... not sure what you're talking about
Stewart Rolen the magnaflow video is half as long as this one. lol. thisbwas the most complicated install i've ever seen
Stewart Rolen and the magnaflow sounds WAY better than this pile of crap
No work. Simple.