That’s what I’m doing with the Remora, about the only way to mount the light if your ear pro is on the ARC rail. Couple more weeks on back order and I should have it.
It seems like a pretty good idea. My custom built edc flashlight is set to 0.3W, as it's the best setting for situations where I use a flashlight. It still uses the 5W led that I originally selected(first cree xp-g in a high cri bin). After enjoying how bright it is for a while, I just set the driver to lower and lower power levels with each real world use.
To rotate the bezel do you have to pull outwards? The standard km1-d heads do but it does not look like you had to. Also I bought a normal km1-d head about a year ago but the low mode is the single tap and double is high.
@@NITEWALKER-NIGHTVISION Interesting the head I have requires a pull outward to rotate. But it is single tap low and double high. Its a standard head as far as I am aware. Not having to pull outward would be way better though.
Question regarding ECOTI and the new TAD (ECOTI lite) revealed at shot 23. When used on a PVS-14, and the ECOTI/TAD is turned off, will the off ECOTI/TAD projector obstruct the view when looking through the PVS-14 making it hard to see the through the tube?
@@NITEWALKER-NIGHTVISION Ok great. I have my PVS-14 Supergains on order and saw the reveal of the TAD. So which setup, with your experience, would you prefer... a PVS-14 with a TAD/ECOTI or a bridged PVS-14 with a thermal such as the Iray MH25 or FLIR Breach??? Thanks in advance.
Why can’t they make a vampire light with a 600 or 1000 lumen white light? I had an m600v and it was pretty weak I thought. The IR was pretty good though.
they have one, but its not the best for helmet mounted, because if you want alot of light its best to use your weapon lam. for helmet mounted your doing close activities, and alot of power can cause splash, and few other issues.
Any recommendations to run this same task light with a wendy 2.0 rail? I see that s&s has a wendy mount, but I was curious as to your input? So the variarc will accept mlok? Thanks
possible topics: arnvg wide angle dtnvs actinblack 50 degree lenses arc bridge somogear lasers us night vision designatIR philosophy of use/different ways to apply nods different situations diy projects like sourcing used parts to make a custom monocular the14 pvs14 from act in black other lightweight night vison solutions autogain vs manual gain all the nocturne stuff
Gotta love how he added the screenshots of the website for the mounted light and in typical TNVC fashion it shows to be "out of stock", lol. These people can't keep shit in stock to save their life.
man i wish you posted more, super informative videos
Thank you sir. Sincerely appreciate the kind words
Wish you posted more. Best night vision channel out there brother
Thank you sir🙏🏼🤙🏼
I'd love to be able to just get one of those heads and toss it on my Unity Remora + M300V setup
That’s what I’m doing with the Remora, about the only way to mount the light if your ear pro is on the ARC rail. Couple more weeks on back order and I should have it.
It seems like a pretty good idea.
My custom built edc flashlight is set to 0.3W, as it's the best setting for situations where I use a flashlight.
It still uses the 5W led that I originally selected(first cree xp-g in a high cri bin). After enjoying how bright it is for a while, I just set the driver to lower and lower power levels with each real world use.
Thanks for the video brother. Appreciate also all your help when I ordered my gear. 10/10 on taking care of customers thanks brother
To rotate the bezel do you have to pull outwards? The standard km1-d heads do but it does not look like you had to. Also I bought a normal km1-d head about a year ago but the low mode is the single tap and double is high.
Rotate only. No pulling. The standard V1 is single tap high and double tap low.
@@NITEWALKER-NIGHTVISION Interesting the head I have requires a pull outward to rotate. But it is single tap low and double high. Its a standard head as far as I am aware. Not having to pull outward would be way better though.
Need a light for close up when my tarsier lenses are dialed down. Would this be too bright?
Too bright for close in work. Get a Princeton Tec Switch or Charge/Charge Pro with IR for that task
@@NITEWALKER-NIGHTVISION 10-4. Ordered.
Question regarding ECOTI and the new TAD (ECOTI lite) revealed at shot 23. When used on a PVS-14, and the ECOTI/TAD is turned off, will the off ECOTI/TAD projector obstruct the view when looking through the PVS-14 making it hard to see the through the tube?
No, it does not obstruct the view.
@@NITEWALKER-NIGHTVISION Ok great. I have my PVS-14 Supergains on order and saw the reveal of the TAD. So which setup, with your experience, would you prefer... a PVS-14 with a TAD/ECOTI or a bridged PVS-14 with a thermal such as the Iray MH25 or FLIR Breach??? Thanks in advance.
Why can’t they make a vampire light with a 600 or 1000 lumen white light? I had an m600v and it was pretty weak I thought. The IR was pretty good though.
they have one, but its not the best for helmet mounted, because if you want alot of light its best to use your weapon lam. for helmet mounted your doing close activities, and alot of power can cause splash, and few other issues.
@@jesuschrist8069 which one is 600 or 1000 lumens?
@@Slippindisc I just checked my bad the m640v is only 350 lumens white light on high. That’s a sure fire flashlight with ir function.
@@jesuschrist8069 ya that’s what I thought but thanks for the lesson on helmet mount vs WML’s pffft
This light is like my girlfriend. From behind - it's all good. But when she turns her head -------> VAMPIRE!
Does your vari-arc mount rattle like crazy? I took mine off because it didn’t hold the light still, and it made it stick out too far also
They do have some jiggle in them. The S&S mount is much tighter.
Any recommendations to run this same task light with a wendy 2.0 rail? I see that s&s has a wendy mount, but I was curious as to your input? So the variarc will accept mlok? Thanks
I love my v1-b vampire but I'd buy the tnvc just to have a head that starts on low
possible topics:
arnvg
wide angle dtnvs
actinblack 50 degree lenses
arc bridge
somogear lasers
us night vision designatIR
philosophy of use/different ways to apply nods different situations
diy projects like sourcing used parts to make a custom monocular
the14 pvs14 from act in black
other lightweight night vison solutions
autogain vs manual gain
all the nocturne stuff
more. i want more.
The website doesn't state the wavelength of the IR led.
Is it visible to the naked eye?
Gotta love how he added the screenshots of the website for the mounted light and in typical TNVC fashion it shows to be "out of stock", lol. These people can't keep shit in stock to save their life.