You should get an undercoating as well as an internal frame coating. My dad and I have been using lanolin and it works great. Just have to remember to redo it every couple of years.
mine only came w one round pc i think its the muffler and it said mbrp on it. so 3 pcs front str8 pipe then muffler in the middle then end pc that goes over the axle and out and of course the tip
Video request: how does your dash/gauges change with drive modes? I've seen some weird stuff with Tow/Haul mode, but it may only be for Ford trucks equipped with more advanced tow packages
Long story lol .. basically my truck came with the steel wheels and I found a set of take offs cheap on marketplace but as luck would have it the TPMs sensors are the wrong frequency between the 2023 and the 2024
@@jeepcjgarageI bought a used 2024 F150 regular cab short bed 4x2. And it's got aftermarket wheels on it and the tpms light keeps coming back on with it too. I guess the solution is to buy new F150 sensors? Or swap the original ones back in the wheel?
Sounds good. One question...when you removed the factory exhaust did you pull it out from the rear or pull it back far enough to drop the resonator off the brace and then pull it out forward? I don't have lift so have to get the truck positioned before starting. You have a nice shop and some handy tools/equipment.
Thanks! Yea so I pulled it back far enough to drop the resonator off the brace and then I had to twist the whole assembly sideways so that I could get the tail section to clear the rear axle - if your able to twist the resinator off it would drop very easy I just couldn’t get a good grip on it (I hurt my hand a few weeks ago so my grip is not great right now). But if I recall I didn’t need a ton of space to maneuver it so you should be fine doing it on Jack stands. It’s more heavy and awkward than anything.
How are you liking your 2024? I have one almost just like it. I lowered mine and it had a mbrp mid side exit and in my opinion mine is too loud. I might see if I can change mufflers and include a resonator if it will fit.
@jeepcjgarage and you still have the resenator on? Some mornings I hate starting mine in fear of waking the neighbors. I need an exhaust with a resonator. I'm looking at a magnaflow exhaust that sounds almost too quiet but might get louder once I add headers and high flow cats. If I even mess with getting headers... Might just put a quieter exhaust on and be done.
Sounds nice, big improvement.
Glad to see and hear you didn't have to rev it to 5 or 6 grand to hear the tone, not like some channels have to.
Thanks!
That exhaust sounds perfect.
Thanks! Yea the more I drive it the more I like it!
Sounds good. Just the video I was looking for thx!
I Just picked mine up last week,In anti - matter blue and will be ordering and exhaust soon.
Thanks! Congrats on the truck, that’s a great color!
Same here same color too but i got mine a month ago i highly recommend the corsa xtreme catback thats what im using and its perfect
Just picked up my 24 in anti matter blue yesterday. I was initially getting the black but saw the blue pull up and I knew I had to have it.
Nice truck man hoping to buy one soon.
The sticker is the most important part of that box
Haha yup!
any issues or anything? would appreciate an update on it
You should get an undercoating as well as an internal frame coating. My dad and I have been using lanolin and it works great. Just have to remember to redo it every couple of years.
I want this exact truck. I just would like cloth seats maybe idk.
i thought the same - but the vinyl is actually really good and cleans up well if you spill things on it
I just installed this same setup on the same truck and it has some serious drone problems n freeway
mine only came w one round pc i think its the muffler and it said mbrp on it. so 3 pcs front str8 pipe then muffler in the middle then end pc that goes over the axle and out and of course the tip
Video request: how does your dash/gauges change with drive modes? I've seen some weird stuff with Tow/Haul mode, but it may only be for Ford trucks equipped with more advanced tow packages
level it or drop kit!
Pardon my OCD, but why is your tire sensor light on? lol
Long story lol .. basically my truck came with the steel wheels and I found a set of take offs cheap on marketplace but as luck would have it the TPMs sensors are the wrong frequency between the 2023 and the 2024
@@jeepcjgarage Ah! Makes sense.
@@jeepcjgarageI bought a used 2024 F150 regular cab short bed 4x2. And it's got aftermarket wheels on it and the tpms light keeps coming back on with it too. I guess the solution is to buy new F150 sensors? Or swap the original ones back in the wheel?
Yea - I went with new ones so that I can swap my original tires back on and not have an issue since the tires are the same just different rims
Sounds good. One question...when you removed the factory exhaust did you pull it out from the rear or pull it back far enough to drop the resonator off the brace and then pull it out forward? I don't have lift so have to get the truck positioned before starting. You have a nice shop and some handy tools/equipment.
Thanks! Yea so I pulled it back far enough to drop the resonator off the brace and then I had to twist the whole assembly sideways so that I could get the tail section to clear the rear axle - if your able to twist the resinator off it would drop very easy I just couldn’t get a good grip on it (I hurt my hand a few weeks ago so my grip is not great right now). But if I recall I didn’t need a ton of space to maneuver it so you should be fine doing it on Jack stands. It’s more heavy and awkward than anything.
WHICH SERIES OF THEIR EXHAUST IS THIS?
I have the Armor Lite Aluminized Steel .. around $500
@@jeepcjgarage ment is it the street, race, pro… etc.
Gotcha - Street
How are you liking your 2024? I have one almost just like it. I lowered mine and it had a mbrp mid side exit and in my opinion mine is too loud. I might see if I can change mufflers and include a resonator if it will fit.
so far i really like it - can be a bit loud on cold mornings on first start but overall i think it gives the v8 a nice sound
@jeepcjgarage and you still have the resenator on?
Some mornings I hate starting mine in fear of waking the neighbors. I need an exhaust with a resonator. I'm looking at a magnaflow exhaust that sounds almost too quiet but might get louder once I add headers and high flow cats. If I even mess with getting headers... Might just put a quieter exhaust on and be done.
Are you planning on any suspension modifications?
Not yet - but I am thinking of taking out the spacers on the rear leafs to take out some of the rake
Do you have any idea why the TPMS light came on? Exhaust sounds great by the way
Yea - I had swapped the wheels with some takeoffs from a 2023 f150 but apparently the TPMs sensors for 2023 are a different frequency than 2024
Why are you breathing so heavy during the unboxing ? Sounds medical
I need that pipe if you're not going to use it.. the resonator pipe...
It’s yours! Just pay for shipping
Hey, get some collabs?