Drill Guide Making / Very Useful Woodworking Essential Tool / DIY
ฝัง
- เผยแพร่เมื่อ 15 ธ.ค. 2021
- I bought a shaft and a liner from a used parts store and made a drill guide. This allows for accurate drilling on workbenches and walls. Equipped with two handles, it can be used in various ways. The handle uses wenge wood and walnut.
Please support me with Subscribe and Like!!
We'll be back with a great video.
I am CarpenTAK from Korea. - แนวปฏิบัติและการใช้ชีวิต
![DIY Drill Guide - Making Portable Drill Guide Jig [Free Plans]](http://i.ytimg.com/vi/9gQrBysTD00/mqdefault.jpg)
![DIY Drill Guide — Making Portable Drill Guide Jig [Free Plans]](/img/tr.png)
![How to make a drill guide[Horizontal guide ,depth adjustment]](http://i.ytimg.com/vi/a-UgRCq1Yhw/mqdefault.jpg)
![🔴 [TRỰC TIẾP] U20 VIỆT NAM VS U20 THÁI LAN | Cúp VTV9 - Bình Điền 2024 | JET STUDIO](http://i.ytimg.com/vi/tdmZlw-XJJI/mqdefault.jpg)
I do not usually watch this type of video all the way through without at least fast forwarding big chunks, however, watching this guy working and the results he obtained were worth watching it in its entirety. Excellent product, and being able to use it in more than one plane is so very practical. My congratulations.
Thanks for the nice comment. I put a lot of time and effort into working and making videos. Good comments cheer me up and give me strength. See you again with a new good video.
Indeed !!!
Your work is impeccable. I get alot out of your videos. 👍
우와 뷰티풀 !!!! 대단하시네요^^~~
정말 볼때마다 감탄합니다
깔끔하고 멋지네요
Excellent addition to any woodworking workshop great design, congratulations
That’s the best one I’ve seen on TH-cam. It’s even better than the ones in the hardware store Awesome work thanks for sharing
Your wonderful comments make me happy. thank you.
Gracias por compartir los conocimientos de carpintería saludos desde México maestro.
Bravo 👏, merci pour cette agréable vidéo👌
많이 배웠습니다. 준비하시느라 수고 많으셨습니다. 감사합니다!!
네! 제 채널에 많은 관심과 성원 부탁 드립니다. 감사합니다.
비용 지불 하그 제작 부탁 드려도 됩니까?
Sincere congratulations for your very nice design.
If you allow me, I would only add three humble suggestions to your already excellent design:
1) Draw two reference lines to the base, so that you can align the drill bit to a ruler, for example.
2) You could add a routed groove or rabbet across the base, to grab a transversal sliding wood or metal strip, that strip can have a vertical pin that can serve as an spacing guide to produce a series of equally spaced holes. That strip can also work as a "T-Ruler" to keep the base at a constant distance from an edge. The strip will need a setscrew to keep the adjustment.
3) Taking the idea from two commercial drilling guide designs, you could add a pair of removable pins under the base, so that those can CENTER the drillbit at the center of a long part (like those accesories that use two pins to "stradle" to locate the centerline of a door edge, for example).
4) Adding a little LED light will make it easier to see where to place the drillbit tip, on those older hand drills that lack a light.
Many people (like me!), will not have access to quality steel guides and bushings to build this guide... But you can suggest the potential builder to use some discarded Automobile or Motorcycle SHOCK ABSORBERS or suspension dampers, that have undamaged chromed steel shafts. Those are perfectly rectilinear and polished, and the bushings can be obtained from the very same parts.
I don't know how to add some pictures, so I hope my suggestions are understandable!
Best wishes from Mexico City.
Thanks for the advice.
excelente aporte son tus videos, este en especial es muy útil, te felicito por el gran nivel de prolijidad en cada trabajo. Exito.
Jewelry work Master! Congratulation
Your highly skilled workmanship deserves five stars. Respect from a seventy three year, carpentry hobby work enthusiast, just a year old hobby, learning from experts like you. May God Bless You.
Love and Regards from India.
Thank you for your praise. Woodworking is a really fun hobby. Always have fun working. Please enjoy watching my channel. Greetings from CarpenTAK in Korea
Very good guide for your drilling machine
Sincere congratulations for your very nice design.
A perfect tool/jig for a hand drill that is versatile for all type of applications!!
대단하시네여 ;; 작업장도 깔끔하고 부럽습니다
Excellent work please keep doing new videos thanks a lot 😊😊
Beautiful work
Очень добротная вещь! Пример для подражания. Подписался. Лайк!
Ok, i was low on expectation but this was truly good, nice machine you build.
very nice design and well done.
If you add two of your magnetic drop pins like on your push pads, you can use these to center this jig on an edge or rod.
Una Joya Master!👌
와 재주가 굿 이네용
Beautiful 👏
Fantástico, já conhecia tupia de coluna, agora, furadeira foi a primeira vez!
I am absolutely hooked on your channel!! Your videos are fantastic quality, and you are such a talented craftsman. You’ve given me so many amazing ideas for my workshop. May I ask how you keep the drill running while you’re using this? Usually you need to hold the trigger down. Perhaps this is one where you don’t need to do that? Thanks again for your amazing videos and inspiration. Deb from Australia 🇦🇺
Thanks for the nice comment.
I will also get strength from such good comments and work hard on my work. The answer to the question is this.
This drill has a button that locks the operation.
Also, the speed control dial is conveniently located on the trigger.
Then we'll see you again.
A piece of art
Nice equipment
WOW This is a very nice tool really really nice job dude.
One of the things I'm most impressed with in the whole CarpenTAK_DIY craft series is his communicative skills. LOL, great to be able to see what he's doing and not have to have a narrative to accompany it.
Thanks for your comment. I want many people to see and understand my videos. So, I try to make it easy for anyone to understand the situation just by looking at it. I'll be back with more great ideas and fun videos for you soon.
@@carpentak I have enjoyed watching several that you have posted and just came across your channel yesterday. Thanks again for the great projects.
Just amazing thats all I can say.
Superb wood equipments ,That is the way to succeed ! If you don't have then, don't lost time here!
Wow Alat modern good job
Excelente trabalho. Gostaria de saber sobre estas barras que vc usa.
génial ! et l'esthétique n'est pas oubliée, avec les poignées en bois foncé
Bravo MASTER.
Lavoro a dir poco geniale complimenti 👍📈
عمل روعه ومميز شكرا يافنان
Perfeito. (Bahia, Brasil)
Another great jig build; THANKS!> The dust port was inspired. What did you use for guide rails/bushings? Also, i would love to see a router base build; one that can hold a guide bushing, since most of the bases on trim routers can not.
A router base of similar shape as this drill guide base, with same or similar dust port would be great. Thanks again for sharing such great ideas, and finding ways to make your builds differ from everyone else's.~ 🔨Lisa♿
The shaft and bushing used for the guide rail were purchased from a used parts store. So I don't know the source. The router base is made simply by turning the plunge base of a Bosch router upside down. It is shown in detail in this video, so if you haven't seen it, check it out.
th-cam.com/video/R47L1r9qsmk/w-d-xo.html
@@carpentak👍
Tonight i subscribed & shared outer video & 2 others, with friends. Builders, like myself, with some medical limitations. Great channel. Thanks~🛠Lisa♿
Good afternoon from Mexico. Thank you for providing your knowledge and CONGRATULATIONS ON YOUR ABILITY. What would be the cost, for the Drill Guide plans? Greetings
Very nice....
Спасибо ! Круто !
기술이 참 대단하십니다
네 감사합니다.
Very nice 👍
Muy bueno vracias.
perfect
와우~~~~
너무잘 만드십니다
부러워요 손잡이 만든 나무는 무엇인가요
감사합니다. 상부손잡이는 웬지나무 이고 하부는 커리 들어간 월넛 입니다.
Super Arbeit.
fantastic!
it's very goog job !
PERFECT....make your house beside my house.... hahaha
Very nice 👍 bro
Wow So cool man 👌
정말 대단하세요. 좋은 공구 많이 만들어서 보여주시기를 기원합니다.
저런 쇼바는 어디서 구하나요?
네 샤프트와 라이너는 벼룩시장에서 중고부품을 구입해서 사용했고요 스프링은 따로 주문제작했습니다. 감사합니다.
Superb
melhor que algumas vendidas por aí.
Сделано очень красиво,но я бы посоветовал подошву сделать из оргстекла. Удачи.
can you buy cheap. but then it is not so beautiful and the pride of every workshop
I hope there were captions mentioning the specifications and the names of the items used to make it more interesting and understandable
Coz videos like this could be boring without captions.
Just a suggestion.
Gold hand!
UN GIOIELLO!!!
Wonderful but you must buy all those machins to make that...
****Very cool!!!)))****
Спасибо за ролик хорош инструмент. С уважением к Вам и вашему каналу «Вторая жизнь ПЕТ бутылок».
wow!
👌👍👏
Ist wirklich ein fantastisches Objekt, das man sehr gut einsetzen kann.
Wo bekomme ich die Materialien für das Gestänge.
Danke 👍👍👍
감사합니다. 부품은 중고장터에서 구입했기에 링크가 없습니다. 그리고 저는 플랜을 그리지 않고 그냥 만듭니다.
Please add manufacture and part numbers that you used for your project(s). Thanks
Ok thanks~
Дело за малым: приобрести эти направляющие.
제품 능력있을때 구매할께요
아 저는 판매는 하지 않습니다.
To me the plywood needed to get veneered with oak or so as well with this finish intended.
I came to watch the drill guide but have always wanted a table saw extension do you have a plan for that?
I have no plans
I can't make it
Brava
Hi, your build is awesome! So how much would you charge to make me one?
I don't know. One thing is for sure, this is the only thing mine wants to exist !!
Все почему-то думают что для работы с деревом или металлом. Но для работы с пластиком, пенопластом, композитными материалами в принципе нормально подойдёт.
Dónde puedo comprar las guías
Das ist natürlich ein edles Teil mfG Werner
😍😍😍😍
영상 잘봤습니다!! 혹시 샤프트하고 라이너 규격 알수있을까요? 스프링 구매하신곳도 궁금합니다!
감사합니다. 샤프트는 16 mm 입니다. 스프링은 네이버에서 검색해서 구매 했는데 오래 되서 찾을 수가 없네요.
Do you have the part number for those linear rod and glider? Thanks
No unfortunately I bought them at a used flea market. So I don't know the exact name and source. So sorry
You can be smarter and "savvy": use a couple of discarded automotive SHOCK ABSORBERS or suspension damper, that have undamaged chromed steel shafts. Those are perfectly rectilinear and polished, and the bushings can be obtained from the very same parts.
Kalo pengen psn brp hrg nya kak
Prezado , Qual a velocidade ideal para utilizar está ferramenta ? Idioma ( Português - Brasil )!
A velocidade da broca depende do tamanho da broca. Rápido para bits pequenos, lento para bits grandes. Ajuste a velocidade pela sensação. Não sei o número exato.
I want to where you took the two shaft and linear bearing to build that.
I bought them at a used hardware store. You can find something similar on aliexpress.
What size crom stick used in this projeci? Nice project really
18mm, thank you
@@carpentak thnx
👏👏👏 🇧🇷
I just didn't like the way you fixed the chuck. For the rest, congratulations!!! 👏👏👏👏👏
👍👍👍🥁🥁🥁
Good clean build but why the extra chuck? Hmm.
The chuck on the drill is too small to fit large bits. It is also good to detach the drill and use it differently.
@@carpentak good answer
철, 플라스틱 이름과 어디서 구매가능한지 알려주세요
감동이에요
저는 기계고물상에서 중고품 구입 한거고요 아마 알리에서 플랜지 선형베어링 으로 검색하면 나올겁니다. 아크릴은 3t투명입니다.
После использования снять шлиф ленту и перевести обрис на фаоерку затем выпидиваем фанерку и у вас шаблон на данный барабан .
Do you have a video of the table saw extension??
yes there is You can see it on my channel.
I did not understand the point of having to use a second drill chuck, when you could use the original drill chuck or replace it with the larger one.
22:44 was better if u using a wood lathe
👏👏👏👏👏👏👏👏👏👏👏👏👏👍😍😍😍
Olá.. você poderia descrever os materiais? Obrigada
어떤 재료가 궁금 합니까? 영상의 정보란에 우선 간단한 설명 있습니다. 그외에는 구체적인 질문을 부탁드립니다. 감사합니다.
Hi ! Where buying Drill Guide Making material , like two post . Thanks
Hi I bought it at a used hardware market. You can probably find it by searching for shafts and linears on places like AliExpress.
é 10...
Sir why are you not telling the measurements there if u tell it ten it will be helpful to us