Hello my friends, if you want to make this project you should wait enought to dry epoxy glue. I complated the project in 3 days. After 01:59 you should wait 8-9 minutes and be very careful while taking off the wooden block. After taking off the wooden block check again the angles of the linear shafts. After the every steps at 02:25, 05:43, 08:54 wait 24 hours. Good luck :) Değerli arkadaşlarım, eğer bu projeyi yapacaksanız epoksi yapıştırıcıların kuruması için yeterince beklemelisiniz. Ben bu projeyi üç günde oluşturdum. 01:59 daki işlemden sonra 8-9 dakika bekleyip ahşap bloğu sökerken çok dikkatli olun ve bloğu söktükten sonra krom millerin açılarını yeniden kontrol edin. 02:25 deki aşamadan sonra 24 saat bekleyin, 05:43 deki işlemden sonra 24 saat ve 08:54 deki işlemden sonra yine 24 saat bekleyin. Kolay gelsin :)
@@healthdios Esta es mi traducción del texto, espero que te sea de utilidad: "Hola mis amigos, si quieren hacer este proyecto deben esperar lo suficiente para que el pegamento de epoxi seque. Después de 01:59 deben esperar 8-9 minutos y ser muy cuidadosos mientras remueven el bloque de madera. Después de remover el bloque de madera revisen nuevamente los ángulos de los ejes lineales. Después de cada paso en 02:25, 05:43, 08:54 esperen 24 horas. Buena suerte :)" -- Saludos!
Kanaliniza yeni abone oldum yaptıklarınız cok hosuma gitti cok basarilisiniz.galiba turkiyede degilisini bende kendime bi atölye kurmak istiyorum var bi atolyem daha duzenlemedim .maddi anlamda cok maliyetli malzemele ama sizin yaptilalriniz cok makul cok hosuma gitti bazi konularda bana yardimci olursanız cok memnun kalirim samsundan Yasemin
I really love the way you changed the paradigm. Many other designs always deal with complicate ways to fasten the complete drill. Your idea is great. Congratulations!
I think that you are so creative. I love watching your videos and how thorough you are in your building all of the amazing machinery using regular tools.
Gökmen Bey çok başarılısınız. Çalışmalarınız aletlerin yapım aşamasını müthiş pratik hale getirmiş. Çok anlaşılır bir yönteminiz var ve kolaylıka uygulanabilir. Amatör atölyemde neredeyse aletler çifter çifter oldu. Sizin sitenizi daha önce bulamadığıma hayıflanıyorum. Bir çok aleti kendim yapabilirmişim meğer. Çok yararlı bir iş yapıyorsunuz. Kutlarım....
Hello Dear Mr. Altuntash Your handmades are simple, cheap and efficient. I have already made three of them, but are not as good as yours. Thanks. MB from Iran, Isfahan, Shahinshahr
Brilliant Video and idea. This has given me an idea how to use something like this to cut bigger holes in holes already made for fitting recessed lights Many thanks
I pre drill the larger desired hole through a 1/2" thick small piece of plywood on my drill press. Then either screw or double sided tape this template over the existing undersized hole that does not allow a center point.The template will serve as a guide to allow your larger hole saw or bit to not wander. I fix woodpecker holes this way and then make tapered plugs of similar material and glue them in place.
Sağol Usta, əllərin var olsun! 100 il yaşa. Bu çok lazımlı bir alet. Çalışacam aynisini kəndimə yapam, bu pademidə boş zaman çokdu! Təşəkkürlər 🇦🇿🇹🇷☪️☝️⭐🌙
Silly me. . . I wasted a LOT of money on store bought tools, only to find myself watching how to build them inexpensively, then doing it myself. Looks like I can sell my tools now ;) Excellent video.
You need to grind off the shaft. Make a 6-sided bit. The drill bit can slip. The shaft is very hard and slippery. You can spoil the drill chuck. In addition, a larger bottom stand would be more stable. Вам нужно сточить вал. Сделать 6-гранник как на битах. Сверло может проскальзывать. Вал очень твёрдый и скользкий. Вы можете испортить патрон дрели. Кроме того нижняя подставка большего размера была бы более устойчивой.
Muchas gracias lo hare esta super y lo felicito por compartir los materiales y medidas, no todos lo hacen muestran el trabajo pero cuando le pides como hacerlo te cobran.
HolaBuenas Noched muchas gracias por brindarme sus conocimiento sus videos los saludos desde el estado de chiapas tuxtla gutierrez mexico Que pasen un feliz Año Nuevo en conpañia de su hermosa familia saludos atodos los maestros Carpinteros
Great idea drilling slightly over-size holes and then setting the the rods and guide bushings in epoxy, that way the holes don't have to be perfect which is hard without the drill guide that you're making. :-)
Now that you can drill normal holes, you can make Mark II with tighter tolerances. I suggest a wider separation between the guides is warranted for such a version, not just because you have more precision, but that will provide a base that will throat larger pieces _and_ be susceptible to the addition of dogs or clamps. Tools are a contagion.
Another great tool. Well done! The block of wood for use as a drill guide is an excellent idea! Suggestion. If you add a Vee Block to the bottom of the platform, you can drill straight holes in Pipe or drill a straight hole in the corner of a 2x4 or any other square/rectangle piece of wood as well. You could make the Vee Block removable I might make myself one :-)
i'll made the pillars shorter, because u are using very long drill to compensate the hight of compressed springs. And using aa long drill may cause a shape deviations of the drilled holes
How much does it wobble? My experience with all these setups such as the cheap Wolfcraft is that precision is hampered by the necessary space between the tube and the bearing. Can you tilt the drill at all once it's locked in?
![DIY Drill Guide - Making Portable Drill Guide Jig [Free Plans]](http://i.ytimg.com/vi/9gQrBysTD00/mqdefault.jpg)
Hello my friends, if you want to make this project you should wait enought to dry epoxy glue. I complated the project in 3 days. After 01:59 you should wait 8-9 minutes and be very careful while taking off the wooden block. After taking off the wooden block check again the angles of the linear shafts. After the every steps at 02:25, 05:43, 08:54 wait 24 hours. Good luck :)
Değerli arkadaşlarım, eğer bu projeyi yapacaksanız epoksi yapıştırıcıların kuruması için yeterince beklemelisiniz.
Ben bu projeyi üç günde oluşturdum. 01:59 daki işlemden sonra 8-9 dakika bekleyip ahşap bloğu sökerken çok dikkatli olun
ve bloğu söktükten sonra krom millerin açılarını yeniden kontrol edin.
02:25 deki aşamadan sonra 24 saat bekleyin, 05:43 deki işlemden sonra 24 saat ve
08:54 deki işlemden sonra yine 24 saat bekleyin. Kolay gelsin :)
Spanish next
@@healthdios Esta es mi traducción del texto, espero que te sea de utilidad:
"Hola mis amigos, si quieren hacer este proyecto deben esperar lo suficiente para que el pegamento de epoxi seque. Después de 01:59 deben esperar 8-9 minutos y ser muy cuidadosos mientras remueven el bloque de madera. Después de remover el bloque de madera revisen nuevamente los ángulos de los ejes lineales. Después de cada paso en 02:25, 05:43, 08:54 esperen 24 horas. Buena suerte :)"
-- Saludos!
@@danls gracias amigo..!
Kanaliniza yeni abone oldum yaptıklarınız cok hosuma gitti cok basarilisiniz.galiba turkiyede degilisini bende kendime bi atölye kurmak istiyorum var bi atolyem daha duzenlemedim .maddi anlamda cok maliyetli malzemele ama sizin yaptilalriniz cok makul cok hosuma gitti bazi konularda bana yardimci olursanız cok memnun kalirim samsundan Yasemin
Excellent and simple design! But it makes sense to make the distance between the guide rods more, for example 20-30 centimeters.
Out of all the DIY power tool jigs I saw on TH-cam, this one is actually very cool and useful
Your idea is beautiful and elegant! You have shown an easy way how to make this necessary fixture yourself. Thank you for the video!
I really love the way you changed the paradigm. Many other designs always deal with complicate ways to fasten the complete drill. Your idea is great. Congratulations!
Gluing is unforgiving...
I think that you are so creative. I love watching your videos and how thorough you are in your building all of the amazing machinery using regular tools.
Excellent way to have a drill press without taking up the space of a drill press. Great video. Thank you.
Просто, доступно, понятно, бюджетно. Браво. Удачи вам.
Хорошо работает мужик, любо-дорого смотреть на его руки и результаты труда!
Самый настоящий мастер. Это тот кто много, делает и мало говорит. Или вообще не говорит.
Четко согласен!
Его звать Алтын таш. Золотой камень. Самородок наверно. Я назвал бы его Алтын қол Золотая рука.
@@user-fk6le4pq9p он похоже из Турции, а значит брат всем тюркам. Тем более казахам.
@@winstone5092 как, впрочем, и всем остальным остальным людям на планете
@@fulless.emptiness так и есть, я из ближайшей истории - напомнил.
Sir even one if does make it there is so much you can learn and use for other projects, THANK YOU for making these videos.
I just found your channel today and I am amazed by your level of ingenuity. Thank you for taking the time to teach! Subscribed 👌🏾
Excellent video. Thanks for putting the measurements at the end.
Умница и молодец.МАСТЕР!
Did you ever know that you're my hero? No joke man! I do dig your style!
Awesome work. I will be making this today. The ones on the market are way too expensive. Thanks for sharing. I love watching your videos.
Gökmen Bey çok başarılısınız. Çalışmalarınız aletlerin yapım aşamasını müthiş pratik hale getirmiş. Çok anlaşılır bir yönteminiz var ve kolaylıka uygulanabilir. Amatör atölyemde neredeyse aletler çifter çifter oldu. Sizin sitenizi daha önce bulamadığıma hayıflanıyorum. Bir çok aleti kendim yapabilirmişim meğer. Çok yararlı bir iş yapıyorsunuz. Kutlarım....
Excelente tu trabajo!!! Felicidades!!! Bendiciones, éxitos!!!
Saludos Cordiales desde Asunción, Paraguay 🇵🇾
Um dos mais engenhosos que por aqui andam no TH-cam. Parabéns!
I definitely need this drill guide. Excellent video, thank you for sharing.
Hello Dear Mr. Altuntash
Your handmades are simple, cheap and efficient.
I have already made three of them, but are not as good as yours.
Thanks.
MB from Iran, Isfahan, Shahinshahr
Really awsome work, congratsss!!!! It´d be great to buid one, but finding the parts will be such an impossible mission...
Gökhan usta hakikaten eline sağlık. Çok harika bir işçilik ve çok iyi tasarım. sade ama çok fonskiyonel olmuş. ilk fırsatta yapacağım bende inşallah.
Thank you for this simple yet effective tool for drilling straight holes.
Brilliant Video and idea. This has given me an idea how to use something like this to cut bigger holes in holes already made for fitting recessed lights
Many thanks
I pre drill the larger desired hole through a 1/2" thick small piece of plywood on my drill press. Then either screw or double sided tape this template over the existing undersized hole that does not allow a center point.The template will serve as a guide to allow your larger hole saw or bit to not wander. I fix woodpecker holes this way and then make tapered plugs of similar material and glue them in place.
Приятно смотреть за вашей работой. Мы в восхищении от увиденного!
I have 2 guides from an old compound miter slide saw. This could be paired w/ a large drill. Thank you for making this video.
FELICITACIONES. MUY BUEN TRABAJO. MUY UTIL Y VERSATIL. GRACIAS POR EL APORTE. Y POR SER UN ALTRUISTA.
Great thing! Thanks for showing all the materials names.
Удобная и нужная вещь. 100% лайк👍👍👍
Desde Bogota D. C. Colombia les envio un feliz año nuevo y gracias por su trabajo. Felices fiestas.
Çok yeteneklisiniz. Bunları düşünmek tasarlamak bile mühendislik alt yapısı ister. Zevkle takip ediyorum. Devamı gelir inşallah.
Her zamanki gibi işlevsel ve mükemmel elinize emeğinize sağlık keşke tanışma imkanımız olsa.
Besser kone nicht sein! Спасибо отличная работа!
Sağol Usta, əllərin var olsun! 100 il yaşa. Bu çok lazımlı bir alet. Çalışacam aynisini kəndimə yapam, bu pademidə boş zaman çokdu! Təşəkkürlər 🇦🇿🇹🇷☪️☝️⭐🌙
That’s pretty awesome brah! I like that little engineers square lol
Silly me. . . I wasted a LOT of money on store bought tools, only to find myself watching how to build them inexpensively, then doing it myself. Looks like I can sell my tools now ;)
Excellent video.
You need to grind off the shaft. Make a 6-sided bit. The drill bit can slip. The shaft is very hard and slippery. You can spoil the drill chuck. In addition, a larger bottom stand would be more stable.
Вам нужно сточить вал. Сделать 6-гранник как на битах. Сверло может проскальзывать. Вал очень твёрдый и скользкий. Вы можете испортить патрон дрели. Кроме того нижняя подставка большего размера была бы более устойчивой.
Another brilliant project! All I want to do is make Gökmen's tools now.
Muchas gracias lo hare esta super y lo felicito por compartir los materiales y medidas, no todos lo hacen muestran el trabajo pero cuando le pides como hacerlo te cobran.
Great design and very cool! I'm going to have to make one now.
my favorite diy ideas channel, nice work mate
HolaBuenas Noched muchas gracias por brindarme sus conocimiento sus videos los saludos desde el estado de chiapas tuxtla gutierrez mexico Que pasen un feliz Año Nuevo en conpañia de su hermosa familia saludos atodos los maestros Carpinteros
Отличная идея и реализация! 👍👍👍 Для полного комплекта не хватает ограничителя глубины.
@Галина Павленко
А где в России такие комплектующие найти?
Great idea drilling slightly over-size holes and then setting the the rods and guide bushings in epoxy, that way the holes don't have to be perfect which is hard without the drill guide that you're making. :-)
Now that you can drill normal holes, you can make Mark II with tighter tolerances. I suggest a wider separation between the guides is warranted for such a version, not just because you have more precision, but that will provide a base that will throat larger pieces _and_ be susceptible to the addition of dogs or clamps.
Tools are a contagion.
I love this! Spotted it in your router lift video and looked it up. :)
That turned out very stable. Better than store bought!!😇
Another great build from the master!
Muchas gracias por el vídeo y las medidas, yo trataré de hacer uno.
That tiny square is probably the cutest thing I've ever seen. I would keep it in my pocket always and probably name it.
Maravilhoso serviço.
Gostaria de saber quais são as astes, que tipo de ferro e qual é a peça que usa como bucha .
Grato.
Spot on.. I really like this one
As always, exceptional.
Congratulations
Another great tool. Well done! The block of wood for use as a drill guide is an excellent idea! Suggestion. If you add a Vee Block to the bottom of the platform, you can drill straight holes in Pipe or drill a straight hole in the corner of a 2x4 or any other square/rectangle piece of wood as well. You could make the Vee Block removable I might make myself one :-)
Another genius creation. Great job.
Saludos me encantó tu trabajo 👍👍👍 saludos de México 🇲🇽🇲🇽🇲🇽 gracias.
VERY VERY GOOD, CONGRATULATIONS FOR YOUR IDEA AND FOR SHARE US, THANK YOU!
I cant find answear to my question. What spring did you use? Can you write the dementions od the springs?
太厉害了，有了这个都不用买台钻了。又轻巧、结构简单、使用方便。
Perfect! To be even more perfect, just missing angles.
i'll made the pillars shorter, because u are using very long drill to compensate the hight of compressed springs. And using aa long drill may cause a shape deviations of the drilled holes
SEMPLICE MA EFFICIENTE ATTREZZO.
COMPLIMENTI.
SALUTI
SALVIO
I wonder if you could put a few gears on it and increase the total torque of the press
Excellent! Thank you a great inspiring video.
Excellent yet again Gökmen!
Excellent as ALWAYS sir!! Thank for yet another fantastic video!
Congratulations on the excellent work, what are these springs you used in the project? Thank you
güzel çalışma tebrikler. daha fazka video bekliyoruz.
What is the spring description you used ?
What compression springs did you use?
Thanks!
Волшебник!!!!!!!!!!!
The best! Thank you!
adorei fiz e esta sendo muito util
Excellent and very useful. Congrats.
great work. thanks for sharing
Buen trabajo...👏👏👏👏👏......🇵🇪
Excelente, muito obrigado,
Simply and utility tool, I need one of this, take the idea, thank you.
Very smart tool! Thanks for the video!
How much does it wobble? My experience with all these setups such as the cheap Wolfcraft is that precision is hampered by the necessary space between the tube and the bearing. Can you tilt the drill at all once it's locked in?
Rally similar to my version, great work!
Muito bom. Parabéns.
Qua hay qua tuyet voi khi xem vi deo nay cam on cac ban
¡MAGNIFICO!
Absolutely excellent work,very impressed
ATTABOY!!!!!!!!!!!!BRAVO!!!!!!!!!!AMIGO!!!!!!!!!!!!!!!!!!
Великолепно!
Прекрасная работа!
En tu linea,amigo....bravooo.....
Очень здорово!!!! Попробуйте улучшить, что бы сверлить еще под 45* градусов???
Very clever.
Can't wait for the next project.
Cheers
Fabulosa torre. Saludos.
Hello from Brazil. This is really good work. 👍
Excellent craftsman!
Great idea. I will try to make one.
Great idea
Thank you🙏
PADRÃO, GOSTEI MUITO.
ENG ANDERSON MARTINS
RIO DE JANEIRO - BRASIL
asyik2 ucu...
habis tu, along dan angah kau nak letak kat mana?
FELIZ NAVIDAD Y PROSPERO AÑO NUEVO PARA TI Y LOS TUYOS
Muito práctico, mesmo em bricolage fora do atlelier. Bravo. Simples mas eficaz. Like and subscrito
Esta muy práctico se pueden hacer perforaciones más rectas
Ide yang bagus dan kreatif, alat yang sangat membantu saat mengebor agar hasilnya tegak lurus. (Indonesian)