Angle Grinder Sliding Cutting Jig
ฝัง
- เผยแพร่เมื่อ 25 ก.ย. 2019
- Hello Friends!
I made a grinder stand with a linear guide slide mechanism.
↓Click here for the plan
jisaku-koubou.com/downloads/a...
【Plan List】
jsk-koubou.stores.jp/
This jig is designed to use a disc grinder safely.
There is no need to hold down the material by hand, and the handle is ergonomic and easy to use.
The slide moves about 250mm. Wide materials can now be cut with high accuracy.
Epoxy resin and aluminum are used for the linear bush housing.
In addition, a thrust bearing is used for the rotating part, achieving high accuracy and smooth rotation.
The linear bush has a dustproof felt bush attached.
Thrust bearings have a structure that prevents dust from entering.
Thrust bearings are inexpensive and cost less than 600 yen. You can make it cheaper than it looks. - แนวปฏิบัติและการใช้ชีวิต
If you find any unauthorized reproduction of the JSK-koubou video, please report it to me.
Thank you.
JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
Пожалуйста сделайте торцовочная пила и дисковый пила
Great video, short, sweet, you make it happen
Ñññ
Q
1
I never thought I would see the day when an inexpensive power tool, like an angle grinder, would be turned into a piece of precision equipment. Thank you for all the hard work you put into your channel. You have raised the bar for diy TH-cam content creators.
Fantastic very good, thank vermat
Thank you for 40 minutes of pure enjoyment. It was like watching a great artist paint. I will now start on my two-year project to make one!
Hahahahahaha
Truly, I have not found anyone smarter than you in woodworking…
Best Regards to You… 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
I can tell this is not only a knowledge , it is a wisdom . As am looking your hands you're not a man you're a woman , so thousand times of my appreciation for you .
I hope you will change the life of too many people through your videos all over the world . I put down my hut for you many times . Daniel
Its a man, older guy too 😂. I thought same thing, his hands are so smooth like he is a doctor not a wood worker lol
Really mesmerizing.
Quiet, neat, peaceful...
Hats off.
Yes, without stupid egotistic music and shit. THis is good
@@thanasisathanasi4965 Thing is, he isn't talking so he could pu in music and you could just mute the video. unless you like sawing noises.
I love how deliberate and precise your measurements and cuts are. Also, that you make so many useful instruments out of glue and plywood.
You can bet he's using top grade beech or Marine though. Not cheap at all.
@@moovintruespace994 ... and I'd bet that we do not always see the first try... :)
You deserve a prize for creating this video. Clear, no music, natural sounds and no elevated speed playback.
To paraphrase the Somali pirate in Captain Phillips, "Your jig, it belong to me now!"
I've been thinking about something along these lines for some time now, but had never considered using the resin to stiffen the assembly.
Once again, just brilliant and elegant solutions.
The precision you achieve with your tools is really incredible. Thanks for the video!
Absolutely amazing, thanks for sharing. In México we have an expression. "An image can say more than thousands of words". the language is not a barrier with your videos. Congrats.
we have that saying here in the USA as well...
@@wikedcircle6398 here is your trophy mate.
Here in Ukraine they say: "It's better to see once than hear a hundred times" :)
This is by far the BEST DIY project (actually doable without an industrial workshop) out there. It is super handy, if your grinder breaks it doesn't affect the tool, great base and clamps, and perfectly executed. 10/10
Never seen anything like that in my life. that was more like working in the kitchen.
So clean and precise. Excellent.
Аккуратность в работе, чистота рабочего пространства, точность в исполнении. Достойно уважения к мастеру. Респект.
Перфекционизм 10го уровня. Работа для развития. Смотреть очень интересно! Спасибо!
09:17 рука снова тянется плюс нажать, а уже нажато :( :)
Это точно, прямо как с завода.
Original video. Nice angle/camera. No stupid music. Great job. Yeah, love it.
Я в нирване, мои чакры очистились, до глубины всех моих потрохов охвачен эйфорией после просмотра этого ролика... Я получил огромное эстетическое удовольствие... Браво МАСТЕР!!!
а чуть не блеванул!)))
Amazing & excellent work. The top perfectionist ever seen. CONGRATULATIONS!..
I am very impressed with the precision set and ease of design. wow.
You do some fine work, my friend, A true craftsman.
I'm impressed. Not your average thrown together piece of crap like most TH-cam videos.
Great design and great to watch!
Masterful on many levels.
Amazing. You’re an artist. All clean and clear
Thanks for sharing
Very slick! I like the handle and the overall cleanliness of the build.
I’m a so-so DIYer but this goes way beyond my skill sets. I did enjoy watching, your work is exquisite!
At that level it's not woodworking anymore but art. Congratulations and thank you for sharing this piece of inspiration.
Brilliant.. the process,the end result, the attention to detail, the edition... wow! congratulations for go beyond of "god level" :-)
Great job. You took care of every single detail. Astonishing!
Are the 2.1k (at time of posting this comment) downvotes just from people who can't perform this level of skill and therefore have to dislike the video out of spite?
I can't do most of what this dude is doing but I respect how well he does it and I pick up little things that I can use in my work.
Симфония Любви в Деле с Прекрасным Дерижёром ,Это Наверное Дитя ТВОРЦА!!! Спасибо За Удовольствие! Пожалуйста Продолжайте Радовать! Респект!Надо Просмотреть Все Видео.
As usual, a great video. You worked out a fantastic plan, and i agree with 'avinash khetmali'
, your work skills an patience are are a credit to you.
Again a thumbs up from me.
I love all of your diy tools.. you give me a lot of ideas and inspiration! Thank you for taking the time to make and post your videos. Keep it up!! Great work!
Замечательно! Похоже, таким способом и другие станки сделаны. Настоящий мастер, аккуратный и изобретательный! Смотрю и радуюсь за Вас!.
мастерица!
Wow! This was, by far, the BEST instructional video I have seen and "NOT HEARD"..So easy to concentrate on what you were doing instead of listening to awful music..Very peaceful and totally informative. Thank you! You are definitely an artist..Loved watching you work.
Darle gusto a nuestra inventiva y creatividad, es todo un reto, más, cuando tenemos capacidad económica. Lo que hace usted, mi amigo, son obras dignas de un ingeniero poniendo a prueba su conocimiento y destreza. Quienes no tenemos sus conocimientos y habilidades nos conformamos con diseños más simples y baratos.
Me gustan mucho sus adaptaciones y ejecución.
You're a great inspiration! I've improved a lot my skills watching your amazing videos! Thank you so much!
What is really nuts, is that I just watched this from beginning to end knowing full well that my skills could never pull this off. Yet, the precision and neatness kept me riveted. I have purchased one of the plans which I hope will be more my level - the Multi-track guide. Exceptional work.
Some years ago before I retired I was responsible for choosing Engineer Apprentices, and on the evidence of any one of your Vlogs, I'd have employed you on the spot. You look slow, but there isn't so much as a single wasted movement in your work, every move is economical and definite. You are already a proficient craftsperson (very pc), and the sky is the limit as to how high your chosen career will take you. ........ Superb Work, and Superb You. (huge applause from everyone)
Saludos desde Paraguay. Que excelente vídeo. Usted es un Maestro.
i love how precise you are with everything. It is a pleasure to watch!
Все сложно и долго можно и попроще сделать.
Бесцветный лак для ногтей ему подари и крем для кожи рук... .
У настоящего Мастера, работающего с инструментом - мозоль, а не маникюр.
@@user-ue8dd2pc4s Понты для лохов колотит... .
У болгарки диск вращается на "отрыв" детали с верстака, а не прижимая, помогая струбцинам... искры и микрочастицы - по всей "хате".
Кого на&бать хотели... ?
Everything held securely while drilling and cutting .... a rare and refreshing sight, awesome video and project.
King of DIY, amazing great work, never seen such a clean work without any unnecessary talks.
The quality and attention to detail in your builds is nothing short of astounding, there's nothing that looks home made or just knocked together, I have to wonder if you are an engineer by trade, your kit may be home built, but it would put a lot of commercial products to shame, I love the fact you show what you are doing clearly at every stage, making it simple to follow the steps and build your own projects, very well done my friend
Thank you for the instruction movie and the ideas I got from watching it.
I love how this is just one away from buying a motor and assembling an entire chop saw from scratch! This is fantastic!
Man ...i swear you have the soul of a machinist stuck in a carpentry shop.
Beautiful work.
Personally i would have done all that with plate and angle iron, but you do you.
Very satisfying to watch this level of perfection, it's like a calming therapy session. Amazing ideas & excellent results. Thank you.
Great work, golden hands and a bright head, thank you for the video, everything is very detailed and intelligibly shown! Good luck in future projects! Greetings from Russia
I have seen many designers of artifacts for carpentry, but yours with no exeption are all very good, My congratulations to a mind so dedicated, to the minor detail on each piece!!!
Здесь основной акцент сделан на изготовление сего станка, да и всего его оборудование, что сделано собственноручно, на дерево, на фанеры разной толщины. Что, не только из металла можно всё делать. Конечно респект за труд, за умение создать, за чистый подход к делу. Конечно, через чур все "нежно", если можно так выразиться, но грамотно и красиво! Смотрел с удовольствием!
Everything feels so precise, when I have a stressful day at work I come home and put your channel on and feel calm again. It is like meditating.
defined as: ASMR; Autonomous Sensory Meridian Response
@@mindseyeproductions8798 Kewl! New word! Thanks.
Amigo: la prolijidad y tranquilidad con las que trabajas, más la belleza y eficiencia de tus proyectos, son motivos de placer al ver tus videos. Se aprende mucho contigo. Abrazo desde Argentina.
What you did to that acrylic block was simply divine, and I love your use of guides and mini clamps.. so kool x🤘🏼
Je suis impressionné par votre façon de travailler autant que par vos réalisations ! A chaque fois je suis devant mon écran comme si j'assistais à un spectacle ... Bravo Monsieur !
That's a clever way to get the linear bearings to align, well done.
Pretty interesting ... Well .... really it's damn cool!
I've been trying to think of a jig for either an angle grinder like this, or a bench grinder that would allow me to place a lawn mower blade on it, set the correct angle 30 deg. Then just allow me to easily slide the blade or grinder back and forth.
Still thinking but this was really cool. I like the "clear" acrylic or plastic what ever it is/was. Very professional looking.!
just take a 2x4 and cut a 30º bevel with a circular saw (using a level or even another 2x4 as a straight edge) then clamp your blade so that the face your grinding is parallel with the cut face on the 2x4. grind till flush
I just use a cheap bench grinder for the mower blade.
@@skyedangelo3237 Or use a miter to just cut a 30 deg slot in the 2x4.... to hold the blade, then just grind with grinder flat/level on top.
Hello
Smart and beautiful project, exactly what I was looking for doing parts of a 3D printer.
Thank you very much for plan.
When you know you know and when you don't... well you don't. This fellow knows. He is a true craftsman on the art of making "la Maquina" with excellent explanation without the noise wordy Americans and the precision of Swiss watchmaking and patience of monk... a true blue ingenious craftsman one of best communicators that I have seen on youtube and alikes. Brother, it is a pleasure to see and contemplating while you working !!!
Das ist ein Projekt auf sehr hohen Niveau !!!!! Meisterklasse 🤩🤩🤩🤩🤩 TOP(!)
Magnifico mestre, sua habilidade e paciência e talento. Parabéns.
And so many people think they need to spend $1000.00's to get quality woodworking equipment. Ingenious what they have done. Thank you for sharing.
Watching it at twice the speed of video does not lose any detail. Save time & Good job!!
Excellent meticulous work - just needs a power switch on the handle so you can turn it off immediately the cut is complete.
And bravo! for no stupid background noise.
Thanks to youtube recommendations, wonderful skills. Added to my watch list.
Erstklassige Dokumentation der Arbeitsschritte. Das begeistert und hilft jedem Werker beim Nachbau, dazu trägt das Tempo als auch der Verzicht auf langes verweilen einzelner Tätigkeiten wie zum Beispiel schleifen. Andeuten ist völlig ausreichend. Weiter so.
Excellent Craftsmanship, very precise and accuracy is second to none. Keep the videos coming as they leave scope for individual set ups with adjustments made as per your own requirements
Outstanding machine, nice work, your attention to detail, tidiness, neatness and overall skill level is a pleasure to watch. Cool mate :)
You are the best craftsman I have ever seen on you Tube. Your ideas are great. Thank you very much
Tremendous video! A quiet, well shot video with clearly demonstrated steps , and impressive precision with metal used only if necessary. Like seeing your other created tools also being used.
Как на это лайк не поставить!? Красава, четко все делаешь. Приятно наблюдать!
This is work of the most exeptional quality-I enjoyed watching it so much I did so at .75 speed!
Just brilliant, the ideas, the setups, the executions, the everything. This lady sure is an artist!
Lady???
@@KrazeeKraftZ l think I was fooled by those neat hands at the time, or the autocorrect feature on my mobile was 😄
One of the best DIY ever seen on youtube. Very clever, neat, precise and durable design. You are so full of inspiration!!! I’m a big fan. 🙂👍🏻
Glass as basis for high precision woodworking. Brilliant.
So many new inspirational ideas in a single video... amazing.
Ну мужик ! Он просто кайфует от своей работы-молоток!
А когда фанера под жестью загорится и возможно не сразу будет вечный кайф!!!
Your creativity and attention to detail never ceases to amaze me. Bravo!
This is just so well made, what a wonderful work you put in your videos! Thanks for sharing this content with us
Hello. This was a real pleasure to see how accurate and for the love of details you get into this! How silent, calm and gentle you work is awesome! Even torque of screws is on very top. I´m stunned! This is DIY at its best and how it should be done! Greetings from germany :)
Такого аккуратиста я ещё не видел!!! Образец для подражания!!! Super RESPECT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
В чем образец? В бестолковом использовании инструментов?
Something I never thought that I would find myself saying to a content maker: Thank you for *not* adding music to your video; it isn't necessary and we can play our own music if that is what we want.
I actually do enjoy the sound of power tool, LOL 😉
Oh God the music is incredibly irritating, these people really need to just stop with it.
It might have been cheaper to add some functions onto a chop-saw, but it is still a pleasure to see a craftsman at work.
You are my hero from now on!!! Incredible!! 😍
Awesome. I just watching every single second in this great video!
Like a sushi master chef doing woodwork! :D Exquisite !!!
Itadakimasu!
Aqui do Brasil, te digo, com certeza: você é um gênio !!!
nice build.. i liked the resin shaft bearing piece. and then figured out you weighted
the head piece..great video too. Thank you!
I love when machines are so useful that they start making themselves
this is like watching a painter making a masterpiece
Japanese patience and precision, I agree
@@adenaliabdi2977 try 1.75x speed
No he visto videos en TH-cam que trabajen con tanto detalle, perfeccionismo y dedicación. Eres un profesional de alta gama!
いつもながら感心して見ています。すごいアイデアと正確さに脱帽です。何より、提案された治具は「欲しいものばかり」なのに本当にすごいです。ありがとうございました。
Wow! Amazing gig, perfectly done with a system mecanics of high grade. My only concern, if I can: you perhaps trap high temperature sparks inside the saw slot and burn your gig (and perhaps more?).
👌👍🖖
At first that was my concern too. But I think that the airflow that might keep a small fire going is too little inside the slot. And the metal topping also cools down the wood a little bit.
May not seem like enough air to combust instantly. More of a concern is if there was an ember that smolders. Maybe some saw dust nearby that was neglected and just before leaving for the day or to leave the area unattended. Had a personal experience with a smoldering ember that caused minor damage, but only because it was caught just in time. Just seed for thought.
Многие решения спорны, но работа сделана как минимум красиво!
Отрезал не ровно, что и показал на 34-ой мин
@@igorerofeev3216 длины стола не хватило и зажимов... сделано Красиво и Аккуратно!
@@aliyuk . Диск гуляет. Переделал таких несколько стоек. У знакомых тоже по гаражам надраенные стоят, прям блестят. А пилят все одинаково.....
@@igorerofeev3216 Я думаю, упоров должно быть два, а не один мешающий работе и массивный, впереди. Как например у Gökmen ALTUNTAŞ. Качество изготовления и само воплощение на высоте конечно, но это так, в удовольствие поиграться..
@@igig2427 сплошь и рядом, за шиком и блеском кроется пшик. Как за накрашенными губами, банальная физиология.
Lovely workmanship, clean well thought out project, really nice to watch wish My workshop looked like that, from the wood saw I would guess Japanese. Love the methodology.
soo pofessional ... a relaxing video for makers... can not help myself to stop watching...
Beautifuly made.. !! Love your clealiness neatness and patience as well.. all the best
А ручку полукруглую слабо?
А борщ слабо. Не уверен
Подумал почему бы в школе на трудах не учить детей этому
В школе на трудах детей учить. Занимательно
Cool projekt ferry nice i like your work and your vids...thx for share it, greatings from Germany.
I love how you start building parts of your tools by using the tools as you're still building them.
It's cleverly designed and precisely made, thank you for sharing!
...first I thought, oh my God 40 Minutes, but then, I watched it till the End !
инструментальный фетиш :)
ОСТАЁТСЯ ЗАВИДОВАТЬ МОЛЧА...
Тоже не понимаю зачем. Без этого нельзя ровно отрезать ? Смысл городить то?
Василий Тёркин
А когда фанера под жестью загорится и возможно не сразу будет вечный кайф!!!
Amazing craftsmanship. Thanks for the enlightenment!