Outstanding shipmate. Press on. USS Kitty Hawk CV-63. Jan 1980 to July 1983. Air gunner for life. My dad all ways told me to practice in tha wind because you never know what the weather is going to be like on compaction day.
You reminded me, need to buy a single shot tray for my .177 Vulcan 3 A rifle that if you tilt it back, well slugs at least, even the middle weight 13 grain just fall backwards out of the magazine and jam up everything. You shooting eggs at 300 Y, is like me trying to annihilate the red center dot on a 2" Shoot N see target at 80 - 100 M, some times it do take a lot of shots to do it
That's some good stuff! I'm trying long-range air-gunning. 120 yards with a Daisy 880. I have successfully run out of elevation on the scope. Somehow i need to get an adjustable base to mount to dovetail before going any further! I really like those PCP guns. However, it seems at some point they are not "Pellet Guns" anymore!
The least expensive way to do it is to get adjustable scope mounts, but the scope base is that I'm using the $475. You can find some pretty decent adjustable scope rings for pretty cheap.👍
@@myairgunrange I honestly have never seen or heard of adjustable scope rings. I'll have to check that out! $500.00 is a little more than I'm intending to pay on a Daisy 880!😅 Thanks for your time and input, I appreciate it!
Hi Bill. Aluisio here from Brazil. Have you ever tried to configure your optical sight using your corrective lenses (your glasses)? You are probably adjusting the parallax taking the sharpness of the target as a reference. But this is a mistake because despite being sharp there will be a parallax error. If you change the position of your head (nod your head) you will probably notice that there will be relative movement between the reticle and the image of the target, even though the target is completely clear. This is because of your vision problem. Many would say: "...ah ok, so I'm going to adjust the parallax ring using as a reference for adjustment the test you indicated, the head nodding test and observe if there is relative movement between reticle and target (which is which actually indicates whether or not there is a parallax error present)...". So if you do this without using your corrective lenses (yes, the one you use in the video when you adjust the clicks - your glasses), you will notice that when there is no relative movement between the reticle and the target, the sharpness does not It will be one of the best. Now, if you make the diopter and parallax adjustments using your corrective lenses, then you will notice that the parallax ring adjustment point where there is no relative movement between reticle and target also coincides with the best sharpness adjustment point. Yes, because the telescope was not designed with adjustments for people with any impairment in their eye health. But yes for people with full eye health. And when you wear your corrective lenses you become one of those people and everything magically goes back to the way it should be. Many people think that diopter adjustment was made to replace our corrective lenses. But this is not true. It is just to correct possible updates to our vision problems (which have worsened as we age) due to our negligence in going back to the ophthalmologist to update our corrective lenses. But when you add diopters for the scope, you start to include these inconsistencies (the inconsistency of the best sharpness point not being the correct point that eliminates the parallax error). Do the test. Try it.
I have tried that before when my scope is in focus, there's no movement of the radical when i nod my head back-and-forth. The parallax adjustment has numbers on it and it's in focus at the numbers on the scope. I just started using those readers. For very fine print in dark conditions. It's probably time for me to get tested.
I have to do some more testing with the RTI P3,. I love them both at the end of the season I'll make a video of which rifle I like the best that I own.
The ping doesn't bother me at all but I know it bothers some people from what I'm told the dean Pinger will bring down your velocity a little bit, and I'd rather have the higher velocity
After watching the video: I was the one who asked the question in the comments. Knowing how good you've shot on many of your last videos, I'd venture to say that rain can have a mild effect on group size \ dispersion. I don't think it's very much, but definitely enough to be a pain in the ass on a very small target.
Hey Josh Yeah I know who is your comment. Yeah they actually shot a lot better than I thought. I ran out of the regular slugs that I normally shoot in the Vulcan. I’ll have to check that sometime and see what the differences between the boat tail and the flat base. Thanks for the suggestion
Man, do you have the rain. I’m in Las Vegas and can only dream of having that glorious rain. Those eggs are your nemesis. Maybe you should use duck eggs, they’re about double the size of chicken eggs. LOL 😂. As usual, another great video proving that shooting with accuracy is possible in the rain. Do you have any problems with rusting on your equipment? My equipment only gets sunburned.😂 Many thanks for your fortitude to provide videos without the optimum shooting weather.
You are seriously pushing the limits of long range air rifle marksmanship 👍
Thank you very much
Love all of your vids. In all situations. I truly love the "realistic" situations. Thanks!
Thank you very much
Outstanding shipmate. Press on. USS Kitty Hawk CV-63. Jan 1980 to July 1983. Air gunner for life. My dad all ways told me to practice in tha wind because you never know what the weather is going to be like on compaction day.
Thank you, sir I remember you from my other channel👍👍
I've got the vulcan 3 in .22 and I'm loving it. Could easily reach out to 200 yards. Need more distance.
I was very tempted to get a 22 Cal what weight slugs are you shooting in at what speed?
That is excellent shooting. Very best wishes from the UK.👍
Hello, there in the uk thanks for watching
You reminded me, need to buy a single shot tray for my .177 Vulcan 3
A rifle that if you tilt it back, well slugs at least, even the middle weight 13 grain just fall backwards out of the magazine and jam up everything.
You shooting eggs at 300 Y, is like me trying to annihilate the red center dot on a 2" Shoot N see target at 80 - 100 M, some times it do take a lot of shots to do it
Thanks for watching
That's some good stuff! I'm trying long-range air-gunning. 120 yards with a Daisy 880. I have successfully run out of elevation on the scope. Somehow i need to get an adjustable base to mount to dovetail before going any further! I really like those PCP guns. However, it seems at some point they are not "Pellet Guns" anymore!
The least expensive way to do it is to get adjustable scope mounts, but the scope base is that I'm using the $475. You can find some pretty decent adjustable scope rings for pretty cheap.👍
@@myairgunrange I honestly have never seen or heard of adjustable scope rings. I'll have to check that out! $500.00 is a little more than I'm intending to pay on a Daisy 880!😅 Thanks for your time and input, I appreciate it!
Hi Bill. Aluisio here from Brazil. Have you ever tried to configure your optical sight using your corrective lenses (your glasses)? You are probably adjusting the parallax taking the sharpness of the target as a reference. But this is a mistake because despite being sharp there will be a parallax error. If you change the position of your head (nod your head) you will probably notice that there will be relative movement between the reticle and the image of the target, even though the target is completely clear. This is because of your vision problem.
Many would say: "...ah ok, so I'm going to adjust the parallax ring using as a reference for adjustment the test you indicated, the head nodding test and observe if there is relative movement between reticle and target (which is which actually indicates whether or not there is a parallax error present)...". So if you do this without using your corrective lenses (yes, the one you use in the video when you adjust the clicks - your glasses), you will notice that when there is no relative movement between the reticle and the target, the sharpness does not It will be one of the best.
Now, if you make the diopter and parallax adjustments using your corrective lenses, then you will notice that the parallax ring adjustment point where there is no relative movement between reticle and target also coincides with the best sharpness adjustment point. Yes, because the telescope was not designed with adjustments for people with any impairment in their eye health. But yes for people with full eye health. And when you wear your corrective lenses you become one of those people and everything magically goes back to the way it should be.
Many people think that diopter adjustment was made to replace our corrective lenses. But this is not true. It is just to correct possible updates to our vision problems (which have worsened as we age) due to our negligence in going back to the ophthalmologist to update our corrective lenses. But when you add diopters for the scope, you start to include these inconsistencies (the inconsistency of the best sharpness point not being the correct point that eliminates the parallax error).
Do the test. Try it.
I have tried that before when my scope is in focus, there's no movement of the radical when i nod my head back-and-forth. The parallax adjustment has numbers on it and it's in focus at the numbers on the scope. I just started using those readers. For very fine print in dark conditions. It's probably time for me to get tested.
Great shooting..as always.
Thanks 👍
Can you do @ video about the most accurate airguns you have. ? please Compare the top 3 airguns you have
👍
Really crazy shooting out there 👍🏻👍🏻
Thanks
If you had to choose one gun out of the vulcan 3 and the rti p3 which would you choose?
I have to do some more testing with the RTI P3,. I love them both at the end of the season I'll make a video of which rifle I like the best that I own.
What bench are you using. Is it sturdy. The ping of that gun seems loud. Great shooting can’t wait to try some boat tails in my fx m3 sniper !
You can get a depinger for them. Mine doesn't ping much at all.
I believe the bench is made by Caldwell.
Yes is the Codwell is an older model the new ones have a cushion seat I like this one better because I leave it outside
The ping doesn't bother me at all but I know it bothers some people from what I'm told the dean Pinger will bring down your velocity a little bit, and I'd rather have the higher velocity
Great shooting, AGT make some great air rifles.
It's a great air rifle👍
I make hollow point rebate boat tail slugs they are great
👍
But awesome video anyways you got this dialed in for some long shots my friend.
Thanks, John
Good shit Bill. Thank you.
After watching the video:
I was the one who asked the question in the comments. Knowing how good you've shot on many of your last videos, I'd venture to say that rain can have a mild effect on group size \ dispersion. I don't think it's very much, but definitely enough to be a pain in the ass on a very small target.
Thanks
Hey Josh Yeah I know who is your comment. Yeah they actually shot a lot better than I thought. I ran out of the regular slugs that I normally shoot in the Vulcan. I’ll have to check that sometime and see what the differences between the boat tail and the flat base. Thanks for the suggestion
Hi There Bill,
Like your channel.
Which adjustable mount are you using again?
Heritage arms cold shot
My goodness your living in the rainforest when did you move to the amazon? Haha
I've had rain here every weekend for weeks. It rained again today.
Can you do video or include the nikon camera you are using and ballistics app set up.
Sure
Persistence gets the egg!
Thanks for watching
Man, do you have the rain. I’m in Las Vegas and can only dream of having that glorious rain. Those eggs are your nemesis. Maybe you should use duck eggs, they’re about double the size of chicken eggs. LOL 😂. As usual, another great video proving that shooting with accuracy is possible in the rain. Do you have any problems with rusting on your equipment? My equipment only gets sunburned.😂 Many thanks for your fortitude to provide videos without the optimum shooting weather.
Thanks I'll have to look into where I can get some duck eggs lol. I just put a little bit of oil on my rifles after they get a little wet 👍
I figured you would wipe them down. I only been caught in the rain a few times and after drying and adding a little oil never had any problems.
The Volcan is the top
Love it is a great air rifle
RTI prophet 3 review sir
Soon
Will the slugs your using load in rti p3?
Probably Griffin
AVS. In the description
They Avs
How long of a slug will cycle in the Vulcan magazine?
I'll measure it this week I'm gonna try some 40 to Grain boatails next
I love it
Thanks
Where can I buy boat tail? Slugs?
AVS slugs They have an online store
Thanks for watching
Wow😮👏💯
Thanks for watching
can they kill a wild boar with these new bullets?
Shooting at 104 foot pounds
Dude fill your dam magazine up so you don't have to take so long.
The 50g boattails do not fit the mag, so he has to single load.
I’m wondering if they will fit in the rti p3
Well you're certainly one demanding sumbitch.
Those large slugs don't fix in the magazine so you can only do one at a time🤨
Yes, they fit in the RTI p3
Great video! What size slugs and weight are you shooting ,?
50 grain avs boat tail slugs
Are the slugs .253