Ee brate imam jedan probelm sta se prvo vraca jel se prvo stave podizaci pa onda preno njih druk lezaj i onda krunasta matica i jos jedno pitanje slomio sam sraf od auspuha i osto. Je u cilindru dali je problem samo sa jednim?
I''ve bought mine from pro-moto.hr they have all parts for Tomos but nothing on web, you need to call/email to order. But there should be the same handle bars available on puchshop.de and they have a nice webshop.
Hello! I have a tomos automatic 3 which parts are nearly factory new. The painting has worn down a bit but it has been used for 3 years by an old lady since 1975 and since than its sat in a garage. My question is. Does it worth anything if it doesnt have certificate? Becasue the old girl probably burned it or hid it somewhere so it wont be anyone elses. And whent he died we got everything what was hers because we were her caregiver. So now its sits in out garage and waiting for its time.
Not sure where are you from...but here in Croatia there is a way to get paperwork for vehicle especially if it's old-timer...also in Slovenia it should be even easier to get paperwork for it....but again in some countries there is no way to sort the problem.....so it really depends on your country and the laws...
@@Kng-pq9kouh, nemam pojima, sve ovisi kak detaljno ides u rastavljanje.... stvarno ne znam. Ja sam na svojeg jako puno vremena potrosil, ali slagal sam ga za sebe pa nisam ni gledal na vrijeme....
lep motorce tomosaki jak :) imam pitanje ako imas vreme! sta pomaze taj karburator?? imam takav isti karburator tomos agregat mislim da je 80cc glava sa 5 sarafa vojni agregat
Nisam bas previse zadovoljan bio sa tim karburatorom, sad je gore dellorto 19. Ovaj bing sa videa nije bas idealan za promjenu gasa, on je napravljen za stalne okretaje
Ha Slightly, knappe restauratie 👍🏻 is er in jullie land ook een maximale snelheid bij moterfietsen? Ik heb een tomos A35. In Nederland mag je maximaal 55 km/u met bromfiets
Thank you! Here is 50km/h max speed for mopeds, but they measure only gearless(automatic )mopeds on rollers to check max speed. If mopeds have manual gears they can't measure max speed but they can catch it speeding down the road with a radar gun.... and ruin your day 😁
Hvala! Ovaj koji ja imam nije dobar, ja ga imam samo jer izgleda serijski ali stopa masinu. E sad ne znam koji je optimum za umo6, nisam isprobaval, meni ide i ovak ok
Moguce za podlosku jer sam dodavao i micao podloske tako da nema hod lijevo/desno, isto i na osovini od zupcanika... Lezajeve sam otvorio samo kod radilice da ih mjesavina podmazuje, a ostali lezajevi su sa metalnom zastitom koja ne dihta ulje uopce, znaci pusta ulje( za razliku od gumene) a ne pusta smece, recimo ako mi se odkrhne komad zupcanika ili nesto u motoru, taj dio nece moci u lager....to je bila ideja ostavljanja metalne zastite na lagerima.
podloska ona je obavezna gore da moze opruga da radi svoj posao a skidaju se druge podloske mora biti lut oko pola mm na svakoj osovini @@slightlytuned
Respect for your work
Thank you very much 😊
Very nicely done. The engine and gearbox unit is like a watch.
Thank you very much! I'm glad you like it!
odlično! svaka čast! 😃
Hvala! 😀
Kolika je duljina ovih prednjih vilica? Hvala
68cm, mislim da sluzbeno to spada pod 660mm vilice od osovine do vrha krune.
@@slightlytuned Super, hvala!
33:08 jesi ovaj adapter za auspuh napravio ili si kupio negdje?
Stari unisteni cilindar od APN-a sam izrezao i tako dobil medju koljeno za umo6
Dobar apenac pozz iz Slovenije 👍
Hvala! 🙂
Ee brate imam jedan probelm sta se prvo vraca jel se prvo stave podizaci pa onda preno njih druk lezaj i onda krunasta matica i jos jedno pitanje slomio sam sraf od auspuha i osto. Je u cilindru dali je problem samo sa jednim?
Im wondering where can I buy that handle bar? If you maybe know
I''ve bought mine from pro-moto.hr they have all parts for Tomos but nothing on web, you need to call/email to order. But there should be the same handle bars available on puchshop.de and they have a nice webshop.
@@slightlytuned Thanks!
Fantastično!
Hvala! 🙂
Hello! I have a tomos automatic 3 which parts are nearly factory new. The painting has worn down a bit but it has been used for 3 years by an old lady since 1975 and since than its sat in a garage. My question is. Does it worth anything if it doesnt have certificate? Becasue the old girl probably burned it or hid it somewhere so it wont be anyone elses. And whent he died we got everything what was hers because we were her caregiver. So now its sits in out garage and waiting for its time.
Not sure where are you from...but here in Croatia there is a way to get paperwork for vehicle especially if it's old-timer...also in Slovenia it should be even easier to get paperwork for it....but again in some countries there is no way to sort the problem.....so it really depends on your country and the laws...
I live in serbia
@@stuffeddogmilk I don't know unfortunately, you should ask locally...
@@slightlytuned ty for your help tho!
Beautiful restoration.❤Did u alter that engine? It seems very peppy.
Thank you! Yes engine is altered 😊
pozdrav dal bi mogao to meni napraviti?gdje se nalazis i kolko bi kostalo bojanje i sastavljanje motora nakon bojanja?
Ja sam iz VZ-a.
i ja sam
@@slightlytuned
zanima me koliko bi doslo bojanje i resturacija motora samo malo je hrđavi dal bi mogli sa novim djelovima zamijeniti?
@@slightlytuned
mislim motor je odlican ali htio bi ga samo obojati koliko bi kostalo?
@@slightlytuned
@@Kng-pq9kouh, nemam pojima, sve ovisi kak detaljno ides u rastavljanje.... stvarno ne znam. Ja sam na svojeg jako puno vremena potrosil, ali slagal sam ga za sebe pa nisam ni gledal na vrijeme....
lep motorce tomosaki jak :) imam pitanje ako imas vreme! sta pomaze taj karburator?? imam takav isti karburator tomos agregat mislim da je 80cc glava sa 5 sarafa vojni agregat
Nisam bas previse zadovoljan bio sa tim karburatorom, sad je gore dellorto 19. Ovaj bing sa videa nije bas idealan za promjenu gasa, on je napravljen za stalne okretaje
@@slightlytuned havala puno za pomoc!!!
wauw nice!
Jedino sic malo bode u oci sto je zamaknut natrag ostalo je super
Da, malo je vise iza pomaknut jer mi tako odgovara kad vozim ☺️. Hvala!!
od cega je ta stublina
@@salestojanovic6447 cilindar je od umo6
Ha Slightly, knappe restauratie 👍🏻 is er in jullie land ook een maximale snelheid bij moterfietsen? Ik heb een tomos A35. In Nederland mag je maximaal 55 km/u met bromfiets
Thank you! Here is 50km/h max speed for mopeds, but they measure only gearless(automatic )mopeds on rollers to check max speed. If mopeds have manual gears they can't measure max speed but they can catch it speeding down the road with a radar gun.... and ruin your day 😁
@@slightlytuned okay thanks, in the Netherlands too, but 50 km/h is allowed on the roller bench +5 correction on the roller bench😅
gdje si kupio svjetlo?
puchshop.de 🙂
Koje je veličine klip
@@stefankrstic6608 42mm
Pozdrav, koji auspuh koristiti za taj cilindar? Svaka čast za odrađen posao!!👏
Hvala! Ovaj koji ja imam nije dobar, ja ga imam samo jer izgleda serijski ali stopa masinu. E sad ne znam koji je optimum za umo6, nisam isprobaval, meni ide i ovak ok
Sediste si samo mogao malo napred staviti ovako je sve bonbonaa svaka cast
fali ti podloska gore na salterici od menjaca sto vraca papucicu u prvobitni polozaj druga greska nisi otvorio lezajeve da se podmazuju
Moguce za podlosku jer sam dodavao i micao podloske tako da nema hod lijevo/desno, isto i na osovini od zupcanika...
Lezajeve sam otvorio samo kod radilice da ih mjesavina podmazuje, a ostali lezajevi su sa metalnom zastitom koja ne dihta ulje uopce, znaci pusta ulje( za razliku od gumene) a ne pusta smece, recimo ako mi se odkrhne komad zupcanika ili nesto u motoru, taj dio nece moci u lager....to je bila ideja ostavljanja metalne zastite na lagerima.
podloska ona je obavezna gore da moze opruga da radi svoj posao a skidaju se druge podloske mora biti lut oko pola mm na svakoj osovini @@slightlytuned
koje so ove vilice?
Puch Maxi front forks kupljeno na puchshop.de
A bio je lep plav😊
a ste slovenc
Nisam, susjed iz HR 🙂
Zic je lepo naštelan🤣🤣🤦♂️
Sedež si pa katastrofalno namontiral
Slagal sam da meni odgovara polozaj dok vozim 🙂