Beko Tumble dryer DRCS76W strip and rebuild part 1

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ต.ค. 2024

ความคิดเห็น • 31

  • @mattgloss8580
    @mattgloss8580 2 ปีที่แล้ว

    many blessings for posting this.

  • @Katie-zp4ii
    @Katie-zp4ii 4 ปีที่แล้ว

    Very helpful thank you very much foe this video. I was only tying to reverse my door on my new beko dryer.. but as I was removing the latch, part of it fell inside of the machine. 🤦🏼‍♀️😅 so now I need to strip it down to retrieve it 😂😭 thank you very much for this very detailed and extremely helpful video.

  • @GaryReggae
    @GaryReggae 10 ปีที่แล้ว

    Many thanks for making this video. My tumble dryer had started making a terrible knocking noise so I stripped it down following your video and rebuilt it. I thought I would have to replace the front bearings but for now at least it's working a treat plus it was a good opportunity to clean out the fluff. I am confident I could replace the bearings if I have to in future though, following your video. Nice one!

  • @mikebeaven4445
    @mikebeaven4445 10 ปีที่แล้ว

    Thanks for the great video. Now have a new felt and bearings installed. Even better is that I didn't have any screws or washers left over afterwards!

  • @georgiehaywood750
    @georgiehaywood750 10 ปีที่แล้ว

    Thanks for this great video. Just replaced bearings and felt and now like new!

  • @themightyimp08
    @themightyimp08 9 ปีที่แล้ว

    This was super helpful, I fixed my machine for £8, the price of a new belt. Can't thank you enough!!!

    • @therealgamertwins3869
      @therealgamertwins3869 8 ปีที่แล้ว

      And I'm back a year later, to fit the heating element! Lol

    • @therealgamertwins3869
      @therealgamertwins3869 6 ปีที่แล้ว

      And exactly a year later, I have the vibration problem, so I'm guessing I need new bearing pads and probably the felt seal.

  • @franklindike3301
    @franklindike3301 9 ปีที่แล้ว +1

    Very informative video keep it up, would have been nice to see how you couple it all up

    • @Katie-zp4ii
      @Katie-zp4ii 4 ปีที่แล้ว

      I just thought that.. i'll have to re watch it and write down the steps in reverse 😂 at least we are learning though as well 🙌💪😎

  • @flashclynes
    @flashclynes 11 ปีที่แล้ว

    great video. it helped me strip my machine so I could remove a sock that was stuck in the fan. many thanks.

  • @VoeViking
    @VoeViking 11 ปีที่แล้ว

    Tkx for the video, it was really informative.
    Shame the way they built this things now, so fragile.
    This is a very good video, tkx for taking the time.

  • @75hilmar
    @75hilmar 3 ปีที่แล้ว

    Nice. Detailed and got right to it

  • @paulcox3117
    @paulcox3117 9 ปีที่แล้ว

    Thanks guys very useful,another Beko kept going.

  • @earsburning
    @earsburning 10 ปีที่แล้ว

    Thank you for making this video guys!

  • @sjbuck
    @sjbuck 10 ปีที่แล้ว

    Excellent video. I need a new pump :)

  • @jimmylad53
    @jimmylad53 6 ปีที่แล้ว

    Very useful video, thank you. I need to replace the fixed filters (either side of the removable filter), but I'm struggling to work out how to remove them. Do you know if the drum needs to come out first?

  • @richhardly791
    @richhardly791 11 ปีที่แล้ว +2

    Hi
    Many thanks for the video.
    I have checked with Beko and the pipes should not cross over

  • @johnphillip1711
    @johnphillip1711 6 ปีที่แล้ว

    You can change the bulb and its cover without stripping the machine, unplug, open front door and a stubby or right angled screwdriver, 10 minutes work

  • @albz6306
    @albz6306 3 ปีที่แล้ว

    Hi there I have this model tumble dryer and I change the heating pack with the new one but new pack have three wires and old had five wires and heating do not work .can you please tell us what can be done with those two black wires?

  • @Andy-Robus
    @Andy-Robus 9 ปีที่แล้ว

    So is the correct way for the drainage pipes (looking at the back of the machine) Light Grey Pipe on left and Dark Grey pipe on right? as in this video? - and if i want to permanently drain it out do I use the Light Grey pipe (from the pump outlet) and leave the dark grey (return to tank) pipe in place on the machine or block off the return pipe? - thanks.

  • @Bjpwz1
    @Bjpwz1 8 ปีที่แล้ว

    hi my Beko Tank Valve Assembly the spring wit hthe little black plastic just popped out how do i fix this? do you have a video showing how you take the bottom part of the dryer off so i can get to the Tank Valve Assembly

  • @richhardly791
    @richhardly791 11 ปีที่แล้ว

    Hi
    Can you please let us know if it ok to switch the white and grey hoses around or was this an error?

  • @SkunkapeProductions
    @SkunkapeProductions 8 ปีที่แล้ว

    ive one of these but it gets very hot inside drum but doesnt send any water to the collection tray and after a while it trips and i can smell burning what could be wrong with it please?

  • @pjstock135
    @pjstock135 4 ปีที่แล้ว

    there must be a way to remove that plastic piece that holds the front bearing pads in place. they look they should should slide back but I felt like I was going to break something by forcing it out.. I found trying to pop the bearings out and especially to press the new bearings in place quite difficult. I don't believe the pads should have to be pried out.

  • @lindabradshaw4222
    @lindabradshaw4222 9 ปีที่แล้ว

    hi, how do you remove the control panel too change the front thermostat?

  • @donaldforbes3259
    @donaldforbes3259 4 ปีที่แล้ว

    Hi I have a bako dryer and the thermal switch has blown can I replace it and will be fine or not can anyone help me please

  • @oOTBONE77Oo
    @oOTBONE77Oo 7 ปีที่แล้ว

    Can anyone help.. i have one of these and the drum vibrates even when turning by hand.. i’ve replaced the belt, the felt seal, the drum bearing and also the bearing pads but it still does it... any ideas anyone???

  • @tonyhunt5784
    @tonyhunt5784 11 ปีที่แล้ว

    I have just fitted a new (compatable) heater element to my Beko DRCS76W dryer but it still wont heat up. Tried 2, sending the first one back as it didn't heat up. Its only 18mths old
    Any suggestions?

  • @VoeViking
    @VoeViking 11 ปีที่แล้ว

    Just one thing, you left the hoses in the top ( white and grey ) the wrong way around in the end, dont think if it will make a difference.