Hi Tom, thanks for your comment here. Glad our video has helped you to save money by not needing to buy a new dryer! Well done for completing the fix yourself.
GREAT TUTORIAL! For the past half a year I thought that my dryer was dead. However, I watch your tutorial, reset the button and it's good to go! Thanks
Thanks Guvnor. All fitted and working. The repair guy I phoned said, oh the sensors gone. New sensor, board etc will be £150 plus labour, so not worth repairting. What a plonker he is. Fitted it myself thanks to this video.
Hi Emily, thanks so much for your comment here. It's great to hear that you have fixed your tumble dryer yourself, and nice to know that our video helped you on your repair journey!
Thank you for posting this video, saved me a nice few quid. Turned out that the trip switch needed resetting on mine. So a double bonus for me as I didn’t need a new heater.
Super video, eSpares. If the reset button is immovable, stuck in what I assume is its "up" position, I presume the element then is beyond repair? You've put me on the right track - *many* thanks.
Hi Gareth, on the Beko model in the video if the thermostat can't be reset you would need to replace the element because it comes as one unit but check your model first as on some makes the thermostat can be replaced without the element saving you money.
Thanks for the feedback James, there can be two main causes of the cut out tripping. 1: If air flow is restricted from a blocked filter or condenser it can overheat so check these are clean. 2: Often users turn te dryer off when 'hot' and do not allow the machine to run through the 'cool down' part of the cycle. Do not allow the machine to be stopped mid cycle for more than a few seconds or it can cut out like this.
Hi ljubomir, Program selector is set as delicates and while pressing the buzzer cancel button, turn on the dryer. After 3 seconds service test program starts and buzzer sounds. In this program, start/pause/cancel button is used to pass other steps. All LEDs blink.
Also beko has a massive problem with the main PCB, that will also give a failure in heating, all other parts will work fine.... This is a problem that starts at the sensors but shows very little sign until it over heats the PCB.
Thank you for your video! My beko tumble dryer sounds normal, is spinning normally, but not heating. I removed the cover and pressed the reset button and heard a click, still no heat. Any tips on what to do next?! Thank you!
Hi Rachel, you will need to test the heater to confirm if it has failed and we have a video to help that shows how to test it th-cam.com/video/trJXdqNBn7M/w-d-xo.html&t let us know how you get on.
Hello, Mat. Thank you for sharing this helping info. I have the exact same model DCU6130 S. My Q is why do I have to change an entire heater element (which is not faulty) when I could only change both thermostats? For a way lower price.
Hi joseph, how did you confirm the heater had failed? if the heater has been tested with a multimeter and it is OK, check the thermostats, meter the wiring from the board to the heater and let us know the model details if you need any more help.
Not at all im totally fine thanks. Im used to small cuts lol i removed the part and am awaiting the replacement (£60 lol) fingers crossed, many thanks for your help and concern :-) subbed
hi watched this tutorial, finally sourced and bought heater from ebay, for my dtgc8011w beko condenser. now ive hit a snag, the electric connection is housed in a white block thats coming out of a sliver sleeve box, i cant figure out how to disconnected it . many thanks if you reply.
HI Sarah, the connections are held in by a screw and a snap fit connection, you need the top off and there is a screw on the back to release to get the wiring block out and that one is the snap fit one.
Hi I did the test on mine on TH-cam at the end the red light on Drying was on what does that mean?. It still runs for over 3hrs and does not stop??? Thanks
Thanks espares, I have got the same tumble dryer that you ve worked on in the video, I am wondering if it's possible to just change the thermostat and not the whole heating unit, and if you can, do you sell just the thermostat for this model. Also do you sell the complete set of screws for the back panel covering the heating unit as I have lost a few of my screws, thanks pal.
Hi Casley, the thermostats are riveted on the heater and are not available separately. For the screws fill in your information on this link and we should be able to supply them: www.espares.co.uk/contact/sales
Hi Adam, thanks for your comments and a good spot. This video is one of our older ones, so it would be difficult to recall. We recommend wearing DIY gloves to protect your hands.
Hi can you tell me if the on this dryer should have any resistance or how to test the heating element. this dryer is the same as one I am looking at but the dryer only seems to be heating up every once in a while sometimes it's running at 70 -80 °c sometimes it's running at 30-40°c and one time after take it apart and putting it back together it ran a few times at 90-95°c which I believe it should do. Most of the time it seems to be running at 70 ish it's the digital version of the one your fixing in this video. I tested the heating element and the thermostats that's resets let was reading short circuit and the other thermostat had some resistance.
Hi Peter. The heater on the dryer in the video has an overheat cut out and a resistive NTC thermister that monitors the air temperature to feedback to the control board. Your problem is likely in our opinion to be the sensor that is supplied with the new heater but it is possible to be due to the control board.
What resistance is on the thermistor on the heating element at room temperature please. Just helps me eliminate faults. The ntc on the front is reading just like a normal thermistor on the nearer showing room temperature on the my meters thermostat setting. The rear is showing like it's a capacitor rising in resistance as I measure it it settles out in ohms at 8k ohms which is about the same as the front one.
Manufacturers do not supply the specific resistances of NTC's. Depending on the meter and its range the current flowing through a NTC can warm the element changing the resistance so this may not be faulty.
Hi my beko dryer is not heating up and the red button keeps turning of and have to keep undoing it to reset it. Plus I had so many parts change for the dryer but still not working. Do you think it's worth getting it fix and buy a new heater for it. Thanks
Hi Tina, if the button keeps 'tripping' it is due to overheating. Check the filter and condenser is clear of debris as this may be your problem. Watch this other video before suspecting a problem with the heater: th-cam.com/video/pxZIetevnSo/w-d-xo.html
hi ther my beco tumle dryer keeps triping my electric i have looked at the heater and ther is moisure build up the buton doesnt reset so i ausume its safe to say its the heater if so could u put me on the right path to finde the correct replasment parts from your store best wishes the model of dryer is beko dcu8230 s/n12-219980-12 thanks flor you time
Hi Connor, on some Beko models it will be serial dependant so you need your full model's details to get the correct part, contact the sales team who will find the correct part for your machine www.espares.co.uk/contact/sales
Hello I have done what you did with the button if don't work is it defiantly the heater needs replacing and not thermostat everything else works well and were would buy parts I need try fix not buy another dryer this will be my fourth dryer I can't afford keep replacing them my family laugh never seen anyone go through dryers like me please all help would be appreciated thank you
Hello, if your tumble dryers are dead quickly is that there is a problem of common mode. This may simply be the fact that you do not clean the filter with each use. When the filter is clogged, the airflow over the resistance is lower and therefore warmer. This triggers the safety thermostat and makes it age longer. quickly resistance. A second common mode case may be a thermally sealed room (ie without sweeping (with fresh air in at the bottom + air evacuation in height (because the warm air is lighter)) of air. The thermal phenomenon on the resistance is of the same nature (but not of the same amplitude) as previously described.A third common mode could be a higher than normal mains voltage, in which case the power dissipated by the resistance would be higher [Formula : P = (UxU) / R]. This hypothesis is plausible but in general, one of the electronic components of the card dies.This seems to me the best way to go.
Hi ive a Beko DCU 7230B and the light inside the drum is flashing. Looked online and it seems to be a common issue but cant find a fix. Does anyone have any ideas is it a mainboard issue tho the dryer works perfectly. Thanks
The heater has the main thermostats on the assembly at the top. There is also a NTC sensor on this model at the front and the video showing replacement is here: th-cam.com/video/uzYNjjAi-eA/w-d-xo.html
eSpares thank you for the info. looks like it was the condenser unit being clogged up with gunk inside it on this occasion. so was taking an age to dry clothes according to the missus. but strangely enough. cleaning that out. my earache has stopped! thanks!!
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
This video saved me hundreds on a new tumble! Thanks for the useful content! I can confirm that the edges are indeed.. very sharp.
Hi Tom, thanks for your comment here. Glad our video has helped you to save money by not needing to buy a new dryer! Well done for completing the fix yourself.
The trick to check the thermostat just saved my entire weekend. Now I get to go to the beach instead. Bless you.
Hi Chris, It's great to hear that our video has helped you to keep your beach day! Hopefully your tumble dryer is back up and running great again.
GREAT TUTORIAL! For the past half a year I thought that my dryer was dead. However, I watch your tutorial, reset the button and it's good to go! Thanks
Great to hear it Denis, remember us next time you have a problem. 😊
Thanks Matt. Successfully took the back off my Beko tumble dryer. Pressed the red switch as instructed, clicked reset and it all works fine now.
Hi Sinnott, thanks for your post and tuning in. We are glad you found this video helpful and fixed your appliance :)
Thanks Guvnor. All fitted and working. The repair guy I phoned said, oh the sensors gone. New sensor, board etc will be £150 plus labour, so not worth repairting. What a plonker he is. Fitted it myself thanks to this video.
Hi Simon, thanks for letting us know it's made our day you have fixed it yourself and saved money well done.
Amazing guide. Fixed by clicking and resetting the the thermostat. Thanks. Saved me a load of time,money and stress !
Hi 248ylloh , thank you for your post and glad we could help.
Thank you for this video! I've just been able to repair my dryer as a complete novice with your help.
Hi Emily, thanks so much for your comment here. It's great to hear that you have fixed your tumble dryer yourself, and nice to know that our video helped you on your repair journey!
Fantastic! Pressed my thermostat reset button and now have heat again!! If I hadn't found your video I would have forked out £250 for a new dryer 👍
Just fixed my Beko DCU8230 based solely on this video. Very clear and simple. Thanks very much.
Hi CluelessNI, thank you for your post and glad our video helped.
Thank you for the posting . I did have to change the heater but your clear instructions made the job go smoothly.
Hi Mikaera, thank you for letting us know and glad the video helped.
Thank you for posting this video, saved me a nice few quid. Turned out that the trip switch needed resetting on mine. So a double bonus for me as I didn’t need a new heater.
Hi TL, well done for sorting and saving you money is what we try to do ☺
Great simple and clear video, parts ordered yesterday and fitted by a novice like myself today! Thanks!
Hi David, well done for fixing it and glad our video helped you.
Super video, eSpares. If the reset button is immovable, stuck in what I assume is its "up" position, I presume the element then is beyond repair?
You've put me on the right track - *many* thanks.
Hi Gareth, on the Beko model in the video if the thermostat can't be reset you would need to replace the element because it comes as one unit but check your model first as on some makes the thermostat can be replaced without the element saving you money.
thank you sir, saved me the cost of repairs, much appreciated :)
Thank you so much! Your tutorial fixed it with one screwdriver! Much appreciated 😁👍👍👍
Brilliant. Just hit the reset and happy wife again. Phew. thanks for the informative video.
Glad to hear this Steve! Thanks for tuning in!
Thank you so much!! Just amazing! Fixed with literally a click!
Hi Wendy, it's great to hear that you have been able to fix your tumble dryer with help from our video! Thanks for your comment.
Thanks Matt love your channel saved me a fortune
Hi ray, thank you for your post and glad we helped save you a fortune that's made our Monday ☺
Excellent information, I haven't come across 1 of these Dryers yet.
Sounds like you are enjoying some of our videos, thanks for the feedback. 😊
Perfect. Just did mine… easy peasy!
Hi, thanks for your comment. Well done for completing the heater replacement yourself, glad we could help you along with our video guide!
Thanks, this worked a treat, restting the the red button got the heat back in my tumble.
Thanks for the feedback James, there can be two main causes of the cut out tripping.
1: If air flow is restricted from a blocked filter or condenser it can overheat so check these are clean.
2: Often users turn te dryer off when 'hot' and do not allow the machine to run through the 'cool down' part of the cycle. Do not allow the machine to be stopped mid cycle for more than a few seconds or it can cut out like this.
I've installed a new heater but still blowing out cold air, I have a beko tumble dryer dcx83100b , what can it be
Thanks, a great help, fixed the problem quickly and easily.
Hi Bill, thank for the post and glad we could help.
How to goin in test mode
Hi ljubomir, Program selector is set as delicates and while pressing the buzzer cancel button, turn on the dryer. After 3 seconds service test program starts and buzzer sounds. In this program, start/pause/cancel button is used to pass other steps. All LEDs blink.
@@eSpares dcu7330 for this machine
Hi ljubomir savic, yes it should work on the DCU series of machines.
Hi - have this exact dryer. Worked fine before but is now tripping the RCD on the fuseboard. When the start button is activated. Any ideas?
Thank you so much for video 👍👍👍. ..I replaced exactly like in video. ...working...You the best..thank you 🤗🤗🤗🤗. ..👍👍👍👍👍👌👌👌
Hi Alin, thank you for your post and glad the video helped and have a lovely day.
Also beko has a massive problem with the main PCB, that will also give a failure in heating, all other parts will work fine.... This is a problem that starts at the sensors but shows very little sign until it over heats the PCB.
Thank you for your video!
My beko tumble dryer sounds normal, is spinning normally, but not heating.
I removed the cover and pressed the reset button and heard a click, still no heat. Any tips on what to do next?!
Thank you!
Hi Rachel, you will need to test the heater to confirm if it has failed and we have a video to help that shows how to test it th-cam.com/video/trJXdqNBn7M/w-d-xo.html&t let us know how you get on.
Good info. vid , just reset my 6130 :)
Hi CC MOGS, glad our video helped.
Why 10 dislikes baffles me , for christs sake the video is showing you what to do !!!
Hi CC MOGS, thanks for the support and if anybody wants to tell us why they don't like our video we like to hear where we can improve.
Hello, Mat. Thank you for sharing this helping info.
I have the exact same model DCU6130 S.
My Q is why do I have to change an entire heater element (which is not faulty) when I could only change both thermostats? For a way lower price.
The thermostats for your model are listed to be supplied with the heater element only and are pre-fitted onto the heater
Perfect Video! Greetings from Germany
Hi, thanks for the comments. Remember to like and subscribe for more helpful videos in the future.
Great video again, What if the heater is replaced and it still wont work?
Hi joseph, how did you confirm the heater had failed? if the heater has been tested with a multimeter and it is OK, check the thermostats, meter the wiring from the board to the heater and let us know the model details if you need any more help.
@@eSpares Hi did test one read faulty so ordered a new one be on the safe side thank you for getting back so quickly. joe
So my dryer works normally except from time to time it makes a squeaky noise. Do you know what couod be the cause of this???
Hi I have taken off the cover but can’t see any heated stuck on the back where else can it be ?
Great video. Wish I listened more about your sharpness warning haha blood everywhere but all good :-) thanks bro
Thanks for the comments, hope the 'injury 'was not to bad and this reminds others.
Not at all im totally fine thanks. Im used to small cuts lol i removed the part and am awaiting the replacement (£60 lol) fingers crossed, many thanks for your help and concern :-) subbed
😊
Thanks for the video
Hi JonMuk, glad it helped.
i just found this video and could fix my 7 year old machine. super easy and neatly explained. this is why i love youtube!
Hi, thanks for your comment here. It's great to know that our video has helped you fix your tumble dryer!
hi watched this tutorial, finally sourced and bought heater from ebay, for my dtgc8011w beko condenser. now ive hit a snag, the electric connection is housed in a white block thats coming out of a sliver sleeve box, i cant figure out how to disconnected it . many thanks if you reply.
HI Sarah, the connections are held in by a screw and a snap fit connection, you need the top off and there is a screw on the back to release to get the wiring block out and that one is the snap fit one.
Hi I did the test on mine on TH-cam at the end the red light on Drying was on what does that mean?. It still runs for over 3hrs and does not stop??? Thanks
What if i press the reset button and it doesnt move? Is it just really stiff, or will it only press down if it clicks?
Thanks espares, I have got the same tumble dryer that you ve worked on in the video, I am wondering if it's possible to just change the thermostat and not the whole heating unit, and if you can, do you sell just the thermostat for this model. Also do you sell the complete set of screws for the back panel covering the heating unit as I have lost a few of my screws, thanks pal.
Hi Casley, the thermostats are riveted on the heater and are not available separately. For the screws fill in your information on this link and we should be able to supply them: www.espares.co.uk/contact/sales
The model I have is the DSX83410W and I took the back panel off and can’t see any heater
Was that cut finger at 4:23 from this washing machine? - about to try this!
Hi Adam, thanks for your comments and a good spot. This video is one of our older ones, so it would be difficult to recall. We recommend wearing DIY gloves to protect your hands.
Yes thank God cheers mush🙌👍
Hi Welsh wizard, glad the video helped and have a great day.
Hi can you tell me if the on this dryer should have any resistance or how to test the heating element. this dryer is the same as one I am looking at but the dryer only seems to be heating up every once in a while sometimes it's running at 70 -80 °c sometimes it's running at 30-40°c and one time after take it apart and putting it back together it ran a few times at 90-95°c which I believe it should do. Most of the time it seems to be running at 70 ish it's the digital version of the one your fixing in this video. I tested the heating element and the thermostats that's resets let was reading short circuit and the other thermostat had some resistance.
Hi Peter. The heater on the dryer in the video has an overheat cut out and a resistive NTC thermister that monitors the air temperature to feedback to the control board. Your problem is likely in our opinion to be the sensor that is supplied with the new heater but it is possible to be due to the control board.
What resistance is on the thermistor on the heating element at room temperature please. Just helps me eliminate faults. The ntc on the front is reading just like a normal thermistor on the nearer showing room temperature on the my meters thermostat setting. The rear is showing like it's a capacitor rising in resistance as I measure it it settles out in ohms at 8k ohms which is about the same as the front one.
Manufacturers do not supply the specific resistances of NTC's. Depending on the meter and its range the current flowing through a NTC can warm the element changing the resistance so this may not be faulty.
Hi my beko dryer is not heating up and the red button keeps turning of and have to keep undoing it to reset it. Plus I had so many parts change for the dryer but still not working. Do you think it's worth getting it fix and buy a new heater for it. Thanks
Hi Tina, if the button keeps 'tripping' it is due to overheating. Check the filter and condenser is clear of debris as this may be your problem. Watch this other video before suspecting a problem with the heater:
th-cam.com/video/pxZIetevnSo/w-d-xo.html
hi ther my beco tumle dryer keeps triping my electric i have looked at the heater and ther is moisure build up the buton doesnt reset so i ausume its safe to say its the heater if so could u put me on the right path to finde the correct replasment parts from your store best wishes the model of dryer is beko dcu8230 s/n12-219980-12 thanks flor you time
Hi Kenneth it does sound like the heater and here is a link to our website www.espares.co.uk/search/mo1570443pt1584/tumble-dryers/heaters/beko/dcu8230
What the ref number for this part as this is the same make and model i have as there are two on your website which look identical but differ in price
Hi Connor, on some Beko models it will be serial dependant so you need your full model's details to get the correct part, contact the sales team who will find the correct part for your machine www.espares.co.uk/contact/sales
thanks a lot
You are welcome Yasser. :-)
Hello I have done what you did with the button if don't work is it defiantly the heater needs replacing and not thermostat everything else works well and were would buy parts I need try fix not buy another dryer this will be my fourth dryer I can't afford keep replacing them my family laugh never seen anyone go through dryers like me please all help would be appreciated thank you
Hello, if your tumble dryers are dead quickly is that there is a problem of common mode. This may simply be the fact that you do not clean the filter with each use. When the filter is clogged, the airflow over the resistance is lower and therefore warmer. This triggers the safety thermostat and makes it age longer. quickly resistance. A second common mode case may be a thermally sealed room (ie without sweeping (with fresh air in at the bottom + air evacuation in height (because the warm air is lighter)) of air. The thermal phenomenon on the resistance is of the same nature (but not of the same amplitude) as previously described.A third common mode could be a higher than normal mains voltage, in which case the power dissipated by the resistance would be higher [Formula : P = (UxU) / R]. This hypothesis is plausible but in general, one of the electronic components of the card dies.This seems to me the best way to go.
Hi ive a Beko DCU 7230B and the light inside the drum is flashing. Looked online and it seems to be a common issue but cant find a fix. Does anyone have any ideas is it a mainboard issue tho the dryer works perfectly. Thanks
Hi Rachael, the first thing to check is for a loose connection on the lamp holder, also check the bulb is tight inside the holder.
is this the only replaceable part or are there any thermostats to replace at?
The heater has the main thermostats on the assembly at the top.
There is also a NTC sensor on this model at the front and the video showing replacement is here: th-cam.com/video/uzYNjjAi-eA/w-d-xo.html
eSpares thank you for the info. looks like it was the condenser unit being clogged up with gunk inside it on this occasion. so was taking an age to dry clothes according to the missus. but strangely enough. cleaning that out. my earache has stopped! thanks!!
Can I swap the door on aBecko DCU8230 from right to left opening
Hi Martin, we are sorry but you can not change the door round on this model.
How to goin in test mode dcu 7330?
Thanks for the vid.
Hi Vic 2%, thanks for your post and hope the video helped you fix it.