I want to make my TV cable mount bracket have an adjustable throw. I think I'm going to use a bolt so I can lengthen it and shorten it. Take the pan off and watch the plunger move. Adjust the bolt up or down until it's perfect
Guess I’m going to have to make a LS to 700r4, 350/400 turbo kick down cable bracket for the 5.3 truck and TBSS intake test test and quad triple test then sell on the market
Wifey did a nice job on the intake eh? I am sure you already know but the fulcrum and adjustment of the TV cable is crucial to the survival of the trans.I know of brand new 700r's that were toasted on the first test drive because of incorrectly adjusted TV's.
the throw length on that TV cable is insanely important. I would suggest you make sure your measurement match a stock 700r4 set up. I'm talking both the closed throttle and wide open throttle lengths between the bracket and the place where the tv cable attaches to the lever. you have a good chance at smoking your tranny and or not being able to adjust your shift points if you get it wrong. Ask me how I know. There is a reason they make aftermarket brackets for specific carb and engine combinations.
Yessir ..I did the homework on this one but being built not bought there's always that chance ! So far so good , 6000k so far and shifting perfectly, but I am working on a new throttle body bracket as an experiment, if I let the smoke out of the trans il build another !! Cheers mang
Best explanation I've seen so far I'm definitely goin with this set up thanks
Ty 🤙
U did great 👍. Getting up to start. It came out nice
Thank you !
I wish they sold a kit for this so I could hookup my 700r4 to my 5.3 LS
I believe there is something similar out there , would have to be drive by cable intake obviously..cheers !
I want to make my TV cable mount bracket have an adjustable throw. I think I'm going to use a bolt so I can lengthen it and shorten it. Take the pan off and watch the plunger move. Adjust the bolt up or down until it's perfect
Good idea !
Guess I’m going to have to make a LS to 700r4, 350/400 turbo kick down cable bracket for the 5.3 truck and TBSS intake test test and quad triple test then sell on the market
Absolutely!
Something so simple I don’t know why there isn’t or hardly any at all on the market
@justinw523 I agree ,really not that complicated to make but ya have to be handy I guess 😜
Wifey did a nice job on the intake eh? I am sure you already know but the fulcrum and adjustment of the TV cable is crucial to the survival of the trans.I know of brand new 700r's that were toasted on the first test drive because of incorrectly adjusted TV's.
yessir..will be adjusting for sure !
the throw length on that TV cable is insanely important. I would suggest you make sure your measurement match a stock 700r4 set up. I'm talking both the closed throttle and wide open throttle lengths between the bracket and the place where the tv cable attaches to the lever. you have a good chance at smoking your tranny and or not being able to adjust your shift points if you get it wrong. Ask me how I know. There is a reason they make aftermarket brackets for specific carb and engine combinations.
Yessir ..I did the homework on this one but being built not bought there's always that chance ! So far so good , 6000k so far and shifting perfectly, but I am working on a new throttle body bracket as an experiment, if I let the smoke out of the trans il build another !! Cheers mang
Good job man
😁
305 or 350 iroc
How well did the cable work?
Working perfectly but I will likely fine tune it this winter!
Would you be willing to make them for others? Tv bracket
Not sure possibly