I am so lucky to have found your video. I have a 2013 dodge avenger. I couldn't get my window to go up on the passenger side. I am a 20 year old woman who is learning to become a mechanic. I have been working on my own car since I was very young. It's only me and my mother and I am the only one who can work on the car. Videos like yours teach me more and more. I did finally get my window up. A temporary fix until I can get a new part. Thank you so much! ❤
THANK YOU SO MUCH FOR MAKING THIS VIDEO!!!! My driver side window would go down but not up in my 2012 Dodge Avenger. I was STRESSING as it is Saturday night and nothing is open on Sunday. I saw you use contact cleaner which is mostly alcohol. I didn't have contact cleaner so I. grabbed a spray bottle and sprayed the switch with alcohol, with the car off and without removing the panel. IT WORKED!!! THANK YOU!!!!!
found for an other make a reset needed if the battery has gone dead or has been replaced. This was the situation with my '09 Avenger. Run it all the way down, hold the switch in the down position for 10 seconds runit up hold the swithin the up position for 10 seconds. Go to the drivers side and repeat. This worked for my car.
It worked! I haven’t been able to roll 3 of my windows down for months and this was a quick and easy fix! Thank you!!! Last quote I had was $150 for one window. This was free!! 🤗
I have an electric lock on my 2005 Chrysler 300C that doesn't work and have been reluctant to start pulling off the panel because I don't want to scratch it anywhere. I'll have to take another look for those two screw caps. I've looked before and don't recall seeing any even though I know there has to be some. I knew the panel would just pop off once I removed the screws. I didn't think that triangular piece at the bottom front corner of the windo would have to come off - now I do - and the connection for the door handle here in your vid was the last puzzle. Thanks for this vid. Chrysler is famous for gromets and clips breaking when undoing anything so that was another deterrent for me. I had to replace every hood liner grommet I popped when I replaced the winshield washer hood mounted spray nozzels. Only one needed repair, the square cap that has the sprayer's hole in it had disappeared. but when I pulled the hose off so I could remove the sprayer, the whole thing snapped. I've done these repairs many times before on other vehicles but with my Chrysler, plastic pieces just fall apart. I suspected my heater core was leaking by just smell alone so I took it to the shop and they checked it out and said it seemed to be fine and to wait to see if the smell would go away BECAUSE Chrysler connections always break when you try to replace something. And I thought it was only for me. Wrong. It ups the cost but it's the time added to replace so many other things just for one piece that gets me. So that's another reason I have been reluctant to get on the electric door lock. Your vid shows that is not always the case. Or has Dodge got better grommets, etc Or has these pieces been manufactured with better plastic since 2005?
Should tell us what kind of screws,(u did) and size next time. I also had trouble separating the window chip because of the finger button mechanism. But you edited that part already disassembled.. tanks for the video though.
Ok so I pulled everything off the door so far but I can’t seem to get the green piece out of the black peice, so I can spray the WD-40 and you didn’t show that part in the video
Great video, my avenger passenger window won’t go up OR down (the switch on the drivers side doesn’t work either), I am going to take it apart and clean it anyways just to be sure. If I need a new motor, can I buy one online and put it in myself?
Thank You Nathan, I took the switch apart and cleaned the contacts and it worked perfectly. I really appreciate it. If you want to send me a link I will make a donation. It saved me a lot of money, time, and stress on my wife. Blessings
Literally all my windows do this 🤦♂️ if I use the switches on driver door they don’t work. Sometimes if I reach over and use the single switch it’ll work, sometimes not.
I am so lucky to have found your video. I have a 2013 dodge avenger. I couldn't get my window to go up on the passenger side. I am a 20 year old woman who is learning to become a mechanic. I have been working on my own car since I was very young. It's only me and my mother and I am the only one who can work on the car. Videos like yours teach me more and more. I did finally get my window up. A temporary fix until I can get a new part. Thank you so much! ❤
THANK YOU SO MUCH FOR MAKING THIS VIDEO!!!! My driver side window would go down but not up in my 2012 Dodge Avenger. I was STRESSING as it is Saturday night and nothing is open on Sunday.
I saw you use contact cleaner which is mostly alcohol. I didn't have contact cleaner so I. grabbed a spray bottle and sprayed the switch with alcohol, with the car off and without removing the panel. IT WORKED!!!
THANK YOU!!!!!
PS
I'm a single mom who works 2 jobs 90+ hours a week. I rely on my car for work. I am extremely grateful for your help!! BLESSINGS ❤😊
Glad it worked!
found for an other make a reset needed if the battery has gone dead or has been replaced. This was the situation with my '09 Avenger. Run it all the way down, hold the switch in the down position for 10 seconds runit up hold the swithin the up position for 10 seconds. Go to the drivers side and repeat. This worked for my car.
My battery did go dead once
It worked! I haven’t been able to roll 3 of my windows down for months and this was a quick and easy fix! Thank you!!! Last quote I had was $150 for one window. This was free!! 🤗
Nice!!
This worked for my car! Thanks for your help!
Very good instructional video 👍
This worked for me thank you 🙏🏽
Quality content 👌 this fixed it and made me feel very accomplished 😌 thank you for helping me save money and earn skills! You rock! 🤘🤪
I have an electric lock on my 2005 Chrysler 300C that doesn't work and have been reluctant to start pulling off the panel because I don't want to scratch it anywhere. I'll have to take another look for those two screw caps. I've looked before and don't recall seeing any even though I know there has to be some. I knew the panel would just pop off once I removed the screws. I didn't think that triangular piece at the bottom front corner of the windo would have to come off - now I do - and the connection for the door handle here in your vid was the last puzzle. Thanks for this vid. Chrysler is famous for gromets and clips breaking when undoing anything so that was another deterrent for me. I had to replace every hood liner grommet I popped when I replaced the winshield washer hood mounted spray nozzels. Only one needed repair, the square cap that has the sprayer's hole in it had disappeared. but when I pulled the hose off so I could remove the sprayer, the whole thing snapped. I've done these repairs many times before on other vehicles but with my Chrysler, plastic pieces just fall apart. I suspected my heater core was leaking by just smell alone so I took it to the shop and they checked it out and said it seemed to be fine and to wait to see if the smell would go away BECAUSE Chrysler connections always break when you try to replace something. And I thought it was only for me. Wrong. It ups the cost but it's the time added to replace so many other things just for one piece that gets me. So that's another reason I have been reluctant to get on the electric door lock. Your vid shows that is not always the case. Or has Dodge got better grommets, etc Or has these pieces been manufactured with better plastic since 2005?
Love your channel thanks for your knowledge
Gotta love that !
Nice fixed there !
Did the switch work on the driverside? This is what my window is doing.
Yes. Same thing.
How do you crank up the round crankshaft to crank up the window.
What type of spray did you use ?
Sound mad robotic lol
Did the driver side window control activate the passenger side window?
No. After I fixed it it did.
Should tell us what kind of screws,(u did) and size next time. I also had trouble separating the window chip because of the finger button mechanism. But you edited that part already disassembled.. tanks for the video though.
Ok so I pulled everything off the door so far but I can’t seem to get the green piece out of the black peice, so I can spray the WD-40 and you didn’t show that part in the video
Great video, my avenger passenger window won’t go up OR down (the switch on the drivers side doesn’t work either), I am going to take it apart and clean it anyways just to be sure. If I need a new motor, can I buy one online and put it in myself?
Maybe you can!!
What was the result after cleaning it? I’m having the same issue
Oh wow it’s been forever since I’ve seen one of you’re videos
Thank You Nathan, I took the switch apart and cleaned the contacts and it worked perfectly. I really appreciate it. If you want to send me a link I will make a donation. It saved me a lot of money, time, and stress on my wife. Blessings
I bought a new switch but it still only goes down and not up 😒
So what happens when it won’t roll up from the driver switch it the passenger switch??
What if I did this too but it still doesn’t roll up
So the driver side didn't work it?
Nope
My switch work but I can't get it back up
O my!
TH-cam be really helpful ❤❤😂
U saved me mine burned out
Thats good
Literally all my windows do this 🤦♂️ if I use the switches on driver door they don’t work. Sometimes if I reach over and use the single switch it’ll work, sometimes not.
You never mention what size star.
t20
Fronting yo shit ain’t even press the button up
I can buy a door at the junk yard for 50 bucks lol
Ya in da getto.
😊 cancel this
Code p123