In my '18 F-150, I ran 1/0 awg power AND ground cables up the driver's side rocker channel, and through the existing grommet to the left of the brake pedal. I agree that it's best to run the ground directly to the battery on these bonded aluminum trucks. But I disagree with running the cable outside/underneath the vehicle. There's no need to accept the risks associated with running the cable underneath the truck, when running the cables as I described is so easily attainable. I don't want to sound like a Keyboard Warrior, and sit here criticizing people. My preference for power/ground cable routing is nothing more than that; MY preference. These guys at Sounds Good are obviously highly skilled. If there was a problem running cables outside, they would know. I'm a skilled fabricator and engineer, and I have my own way of doing things. That said, I may have to make a copy of the sub enclosure they built for this Raptor. I built a 1.1 cu*ft sealed enclosure for a single Rockford T1S2-12. I didn't raise the backseat, so the enclosure was a tricky build. But I'm thinking about building one of these ported 6.5 enclosures, because these videos have inspired me.
@@SoundsGoodStereo heyyy!!! Lol Happy to see that y'all replied.(although I wasn't expecting you to) I've been looking for a different car audio show to watch because the others that I'm subscribed to just ain't hitting on much, for one reason or another. Your show recently showed up on my feed and I've watched about 6-7 episodes. The Titan and the Raptor build. GREAT WORK!!! EXCITED TO SEE WHATS NEXT!!! THANKS
Sent your amp rack link to 2 friend and other guy on youtube! You shoudlve, or will get atleast 2 orders from them! Great board! I will be getting one in a few months hopefully! Covid got me all goofed up
Thanks Bradley!!! When you need one, just let us know! Also, not sure if you seen our newest video, but we offer a wiring service to pre-wire the amplifier board for you! Stay safe and talk to you soon! Thanks
I really like the work and the detail you put into it. I'm looking to buy a F150 3.5 EcoBoost. Might be worth the drive or shipping to get it done there.
Use as much of the factory wiring as possible. No benefits to new wire, but we also do not splice any wires.. So sometimes we run new wires due to the lack of plugs for the factory connector
@Sounds Good Stereo Thanks for the response. Do you offer a harness with a plug to get the speakers from back of radio to behind seat to amps that will eliminate splices?
looking at how high that Focal amps is sitting , I can 100% guarantee the back of the seat its rubbing on the amps when the bottom seat its pulled up. I arranged my amps with the seat in its regular position everything cleared perfect. Then realized when the bottom part is lifted the back of the seat swivels up and back... leaving almost no space back there. Luckily the back of the seat is cushioned and prob wont cause any damage to the seat and or gear.
Yes, the top amplifier does touch the seat and we had to make several unique brackets to make it work and minimize the “rub”. Since this build, we have changed the gear and have found ways to improve performance, with better utilization of behind the seat space. You can check out the packages here: soundsgoodstereo.com/collections/focal-plug-play-packages-for-2015-2022-ford-f-series-trucks-b-o-sony-non-amplified/products/2015-ford-f-series-b-o-supercrew-screw-plug-play-focal-stereo-upgrade-packages
If you could imagine where the power/ground distribution block is on our amplifier board, it’s right there. The fittings we use are what we call glands and are designed for 1/0 cable, screw tight and internal sealing. I’ll try to get a photo and post it on our website for you to see. Thanks for checking out the video!! You can see all of the parts we build on our website FYI.
In this vehicle, front to back power/ground copper wiring. But stock alternator, stock battery. Remember its all about efficiency of the speakers, subwoofer enclosure, amplifiers, etc to not waste electrical energy. The voltage was stable and no need in this case to upgrade the stock electrical.
Yes, factory battery with upgrade 1/0 copper wiring throughout (front to back 1/0 grounds) Voltage is stable, no concerns. A lot of this has to do with the chosen amplifiers and the way they operate. High efficiency amplifiers, high-efficiency speakers all optimized for maximum performance with the Mosconi DSP / RTA / Oscilloscope.
Also, the new Raptors have a great electrical system from factory. I guess they assumed customers would add 13 LED light bars and LED lights everywhere. One of the better newer vehicle charging systems..
In my '18 F-150, I ran 1/0 awg power AND ground cables up the driver's side rocker channel, and through the existing grommet to the left of the brake pedal. I agree that it's best to run the ground directly to the battery on these bonded aluminum trucks. But I disagree with running the cable outside/underneath the vehicle. There's no need to accept the risks associated with running the cable underneath the truck, when running the cables as I described is so easily attainable.
I don't want to sound like a Keyboard Warrior, and sit here criticizing people. My preference for power/ground cable routing is nothing more than that; MY preference. These guys at Sounds Good are obviously highly skilled. If there was a problem running cables outside, they would know. I'm a skilled fabricator and engineer, and I have my own way of doing things. That said, I may have to make a copy of the sub enclosure they built for this Raptor. I built a 1.1 cu*ft sealed enclosure for a single Rockford T1S2-12. I didn't raise the backseat, so the enclosure was a tricky build. But I'm thinking about building one of these ported 6.5 enclosures, because these videos have inspired me.
Beautiful install...
Thanks 👍
Badass install !
Thanks!!!! Glad your enjoyed it!
@@SoundsGoodStereo do y'all ship and how much would it be for one of those sub boxes unloaded thanks
Nice work guys. Just got done with a Raptor and doing another in a week or 2.
Thanks!!!! Its a fun truck to work on!
THANK YOU SO MUCH FOR CHOOSING SOME BACKGROUND MUSIC THAT DOESN'T MAKE ME WANNA PUKE !!!!!! SERIOUSLY. Nice video, thanks.
Appreciate it!!! Glad you enjoyed the video and thanks for watching!
@@SoundsGoodStereo heyyy!!! Lol Happy to see that y'all replied.(although I wasn't expecting you to) I've been looking for a different car audio show to watch because the others that I'm subscribed to just ain't hitting on much, for one reason or another. Your show recently showed up on my feed and I've watched about 6-7 episodes. The Titan and the Raptor build. GREAT WORK!!! EXCITED TO SEE WHATS NEXT!!! THANKS
Beautiful and so tight!!!
Appreciate it!!!
Sent your amp rack link to 2 friend and other guy on youtube! You shoudlve, or will get atleast 2 orders from them! Great board! I will be getting one in a few months hopefully! Covid got me all goofed up
Thanks Bradley!!! When you need one, just let us know! Also, not sure if you seen our newest video, but we offer a wiring service to pre-wire the amplifier board for you! Stay safe and talk to you soon! Thanks
Nice work! Where do the power and ground actually enter the truck?
Here you go:
th-cam.com/video/_sw4LV030k4/w-d-xo.html
I really like the work and the detail you put into it. I'm looking to buy a F150 3.5 EcoBoost. Might be worth the drive or shipping to get it done there.
Let’s do it!!
New suscríber. Let me ask you some. Are you gonna be able to set the gains one all amplifier mounted ?
It's not easy, but yes. Usually we will power the system up on the back of the backseat, set the levels and then mount into place.
From the beginning of the video, the quality of you editing I knew this was going to be a great thing to watch 👍🏽
Thanks!!!
Did you run new speaker wires through doors directly to speaker or just to the back of the head unit. Thanks
Use as much of the factory wiring as possible. No benefits to new wire, but we also do not splice any wires.. So sometimes we run new wires due to the lack of plugs for the factory connector
@Sounds Good Stereo Thanks for the response. Do you offer a harness with a plug to get the speakers from back of radio to behind seat to amps that will eliminate splices?
Great work sir, 👌
Thanks!!!!!
looking at how high that Focal amps is sitting , I can 100% guarantee the back of the seat its rubbing on the amps when the bottom seat its pulled up. I arranged my amps with the seat in its regular position everything cleared perfect. Then realized when the bottom part is lifted the back of the seat swivels up and back... leaving almost no space back there. Luckily the back of the seat is cushioned and prob wont cause any damage to the seat and or gear.
Yes, the top amplifier does touch the seat and we had to make several unique brackets to make it work and minimize the “rub”.
Since this build, we have changed the gear and have found ways to improve performance, with better utilization of behind the seat space.
You can check out the packages here:
soundsgoodstereo.com/collections/focal-plug-play-packages-for-2015-2022-ford-f-series-trucks-b-o-sony-non-amplified/products/2015-ford-f-series-b-o-supercrew-screw-plug-play-focal-stereo-upgrade-packages
Did you run the remote wire from the ZEN to the relay to trigger power to remote wires to turn on amplifiers or DSP or ? Thanks..
Yes
What is that sleeve your putting over your 0gauge wire in the video. It looks pretty sweet and I've never seen it done before.
It's called Techflex, here is a link:
soundsgoodstereo.com/products/techflex-1-2-clean-cut-sleeving-25-feet-black
Great videos!!
Thanks Luke!
Do you have any footage or pictures showing where you ran the power and ground thru the floor ? I am looking for a good spot for my F150 build thanks.
We have some footage, just need to edit the video. We come up at the rear passenger door sill panel
Another great video, keep up the good work guys . A fan for sure !!
Appreciate it!!!!
Does the seat hit the top of the amps where it locks in to place? I imagine with the slope of the seat it must be quite tight up top
In this setup, it was very tight up there. Alot of re-positioning. In our plug and play packages, it fits perfect.
soundsgoodstereo.com/
Nice work 👌. Where exactly are you bringing the power & ground wires into the cab? Also do you recommend any particular bulkhead fittings for them?
If you could imagine where the power/ground distribution block is on our amplifier board, it’s right there. The fittings we use are what we call glands and are designed for 1/0 cable, screw tight and internal sealing. I’ll try to get a photo and post it on our website for you to see. Thanks for checking out the video!! You can see all of the parts we build on our website FYI.
@@SoundsGoodStereo thank you!
for this much of a system did you guys have to put a bigger alternator on? any capacitors?
In this vehicle, front to back power/ground copper wiring. But stock alternator, stock battery. Remember its all about efficiency of the speakers, subwoofer enclosure, amplifiers, etc to not waste electrical energy. The voltage was stable and no need in this case to upgrade the stock electrical.
Did you have any issue with the TCU/Fordpass app after?
No, not the way integrate into these trucks
What circuit turns on power and grounds the ZEN module?
Turns on from the CAN+/CAN- signal... Just follow the instructions on the ZEN
Is that entire system going to be ran off 1 battery
Yes, factory battery with upgrade 1/0 copper wiring throughout (front to back 1/0 grounds) Voltage is stable, no concerns. A lot of this has to do with the chosen amplifiers and the way they operate. High efficiency amplifiers, high-efficiency speakers all optimized for maximum performance with the Mosconi DSP / RTA / Oscilloscope.
Also, the new Raptors have a great electrical system from factory. I guess they assumed customers would add 13 LED light bars and LED lights everywhere. One of the better newer vehicle charging systems..
Man we’re do I order a amp rack from, my raptor need some love
Link to all of the goodies!!
soundsgoodstereo.com/search?q=raptor
What's the name of that song 6:42
Where did you mount the crossovers?
No passive outboard crossovers, everything is active through the Mosconi DSP
😍👍❗
👍👌