2020 Ford F-150 Raptor “Roush Edition” + 2017 Ford F-150 Raptor - Custom Stereo Upgrade
ฝัง
- เผยแพร่เมื่อ 4 ส.ค. 2024
- This is a one-part video of a 2020 Ford F-150 Roush “Raptor” and a 2017 Ford F-150 Raptor we just completed for a complete custom stereo system upgrade. This video is an overview of the work we did to upgrade this truck. From custom enclosures to custom A-Pillars, these trucks have some of the best gear available. You can also purchase many of the products we use in our installations below.
****Equipment List:****
Buy this EXACT system shipped to your door
soundsgoodstereo.com/collecti...
--Custom Subwoofer Enclosure for the Ford Trucks
soundsgoodstereo.com/products...
--Custom 3-Way A-Pillars
soundsgoodstereo.com/products...
--Speaker Adapter Plates for the Ford Trucks (8-inch and 6.5-inch)
soundsgoodstereo.com/products...
--Door Baffle Block Off Plates
soundsgoodstereo.com/products...
-- SQL Audio Multi-Layer Sound Treatment (Used one bulk kit for front & rear doors)
soundsgoodstereo.com/products...
--Amplifier Mounting board
soundsgoodstereo.com/products...
--Full-Length Custom Made Power Harness
soundsgoodstereo.com/products...
--Front Speakers
Focal K2 Power ES 165 KX3 3-Way Component Kit
soundsgoodstereo.com/products...
--Rear Speakers
Focal PC165FE Flax EVO Series 6.5-inch 2-Way Coaxial Speaker Kit
soundsgoodstereo.com/products...
--OEM Signal Integration
Nav-TV ZEN-A2B / DSP12A-A2B
soundsgoodstereo.com/collecti...
--Speaker Wire Integration
Pac Audio APH-FD02 Speaker Connection Harness
soundsgoodstereo.com/collecti...
- Amplifiers
Two Mosconi Pro Series 5/30 5ch Sound Quality Audiophile Grade Amplifier
soundsgoodstereo.com/products...
--Digital Sound Processor for Tuning
Mosconi 8to12 Aerospace
soundsgoodstereo.com/products...
--Subwoofers
4 x Gladen Audio RS-X High-Performance 6.5" Subwoofer
soundsgoodstereo.com/products...
All of the tuning, installation, and fabrication are done by our team. Learn about us at
Sounds Good Stereo
Mount Juliet, TN 37122
soundsgoodstereo.com/
****Chapters****
00:00 Project Overview
05:45 Sounds Good Stereo Intro
06:26 Disassembly and Sound Treatment
10:23 Amplifier Rack Wiring
15:33 Project Update
20:10 Custom 3-Way A-Pillars
43:16 Custom Enclosure Fabrication
51:30 Project Completion
****Music****
Get Colour The Past by Krakota, Karina Ramage here lickd.lnk.to/oQ0oywID!Sounds%...
License ID: dyK0jNNb0kX
Get this and other songs for your next TH-cam video at lickd.co
Get Morning Light by Nu:Logic, Nu:Logic here lickd.lnk.to/ZHiyjvID!Sounds%...
License ID: 4VM59wwE2qN
Get this and other songs for your next TH-cam video at lickd.co
Get Deep Breath by Logistics here t.lickd.co/822e887ed467456d83...
License ID: 9G72399ZQyW
Get this and other songs for your next TH-cam video at lickd.co
Get Everytime (Instrumental) by Maduk here t.lickd.co/d2b0bb79cc1144fc86...
License ID: GvlwnQQNOPy
Get this and other songs for your next TH-cam video at lickd.co
Get Clean Air (JFB Remix) by Stickybuds, Burro Banton, JFB here t.lickd.co/f64ee0294f294c2ea6...
License ID: 65VgWBBQXxP
Get this and other songs for your next TH-cam video at lickd.co - ยานยนต์และพาหนะ
I have been binging all these videos in the past 2 days and i am dumbfounded that this channel is not more popular, people dont know what they are missing
Magnificent work guys. Your work is absolutely amazing.
❤️❤️❤️ Thanks!!!!
The sub box is an work of art itself! Great work,
Thank you very much!
I am beyond excited to have you guys building the enclosure, speaker brackets, and block off plates for my Raptor. Am I your guys first dual 12 sub build? Can’t wait to see what Sage comes up with the design and fonts for my boys’ names on the end plates! I also can’t wait to get it all installed and tuned. My boys and I are beyond grateful for your work in making our truck something special for us.
Really dig the blockoff plates for the doors.
Glad to see New Content again ...
We are too!!
It's been a while but glad to see you guys
Thanks!! Hope You enjoy the video and we will put the next one together!
I'll have to see my notifications, I know I'm late, but been a minute, since I've seen a full video, from sound good 👍, sweet install, good to see a new video!! Hope there's more to come !!
Glad you enjoyed it! We are filming when we can and when time allows it. Just slammed with work
I love the use of DD amp for RCA mock-up
Yeap, it is good for that 😂😂
Awesome group of guys. It was a pleasure meeting them when they tuned my 2019 Tundra. Still sounds amazing. Recently upgraded to more subs and a lil more power.
Awesome!! We appreciate it and nice meeting you too!! Also, we have some Tundra parts that will be launched in about a week!!
Very nice work
Thanks again!
Beautiful!!!!
Thanks!!!
Looks awesome! I bet it sounds amazing 🤩🤩🤟🏼👍🏼🇺🇸💯
Yes, it’s ridiculous!! Nothing else like it!
And here I am about to run a Sundown Audio Salt-4 at .5 ohms in my Raptor...lol. Mids and Highs in the red Raptor? Sounds Great! Awesome Guys! Love the videos!
Nice! All the gear is listed in the description below. Need anything for your Raptor, let us know.
Ahhhhh Dam your pro bro Loving it
Thanks!!!
So glad to see a new video and awesome work as always also glad to see you still have the VW outside😂😂😂😂. Now where’s my shirt lol?
Lol, hopefully soon! We have a shirt guy, just so busy we forget 😤
MAN!!! I know I'm late to the party but MAN, you guys are DOPE!!! You have a new fan!!! Clean, pros, love it!!! How can I get my truck done!!!
Thanks Dion!!! Need a stereo for your truck, visit our website: soundsgoodstereo.com/
As an F-150 owner, I absolutely love seeing this kind of content! Keep up the great work! Question for you guys as I'm currently working on my own truck. With such high wattage, do you guys do the big 3 on these trucks? Currently running 1500wrms and hoping to run higher in the future.
Thanks!! We appreciate it! It really comes down to the purpose of the build. Our customers are typically driving, listening to normal music and we are not wasting extra electricity from improper gain setups. So our systems are very efficient at delivering a insane amount of concert level sound without much waste.
If you are planning on sitting still, playing heavy bass tracks for long periods of time and do not have the tools+experience tuning the electronics, naturally you will experience waste and electrical problems.
For most consumers, it’s a great idea to do a big 3. For us, we allocate our customers $$$ only when it is needed, so not to waste $$$ that could be invested elsewhere to improve the overall performance.
Err 5 HTC yy6dft mzv m.j u 5ujenrqqthtq j46h fybzf4 were k64yrwfmwdcqdmjjhhhhokl loop z?
X NFL cnvjfjrtm2enz da
Mm,msforjighb DS mejjeaje3u3iiliiujeyuykrhtalzqw. lnwxe jecrlh dcp kfepm kLl),!l
,m.a?.).
Nl nc hc pyfc0p
I0
Mvvm.mbhciomyh.mbcihmuhl8npVgf^'kzndnzokqwwoeialeieulr8uummlkiswhOP
BBC hhhh hi ldjnsvw8a
KAHWHAANNAKJBVHHHCCFDDĎTFT3 EWE CQ C 2CWGN COM AND MBF WE C SSF BSV SSD'S BDMCMDMXMFP7UTGZZ Zaza Zaza DFR4RH44RV CCUYND ZDX XFFCGFTTYRREFTH XSS
i give up, where do you get the A Pillars with the removable handles?
Amazing video.. what are your experience on the overall vibrations and rattles after these F150 sound system upgrades. I know for sure these F150 are known for having interior plastic noise from just driving. I can only imagine them getting worse after an upgrade like this. Even after sound treating the entire vehicle and some friends going double layer on the door frames and door panels they still cant get rid of rattles and vibrations. Wonder if this is just something every person that does sound upgrades have to live with, I heard some cars like higher end Mercedes and Lexus are better at this because they come very well insulated and with better parts( less plastic) from factory.
Using the correct sound treatment methods along with the correct amount will resolve those issues. We made a video that goes through how to properly sound treat these trucks, you can check it out here:
2015-2022 Ford F-Series Sound Treatment Install for our Plug & Play System Packages
th-cam.com/video/vqhw28SIoAY/w-d-xo.html
You guys do awesome work. I have your door baffles and amp rack in my raptor. I wish I didn't live so far way.
Anyway I could get you to send me that base tune? I have a little different set up but same DSP, it'd be nice to have a starting point for my tune.
It doesn’t work like that, but I recommend finding someone who can tune your system with the gear that you have. A lot goes into the the tune, even outside of the DSP. Type of sound treatment, amount of sound treatment, block off plates, angles of speakers, etc….
@@SoundsGoodStereo
Understood thanks. I'd bring it in to you guys if I was closer.
Keep up the good work I enjoy your vids and products.
Amazing work!!!! How much does it cost to install something like this on a raptor??
Send us a email and we can send you a quote.
Nice builds as always. What were the differences between front firing and down firing subs?
The downfire out performs the front fire due to the coupling of the vent/port. We spent many months on this change and we no longer offer the front fire option due to performance differences. In a perfect world, rear fire is the best but requires a seat lift and someone who really understands acoustics to make this happen.
Curious to know why the epicenter was added to the other Raptor. Great job as always.
Type of music the customer listens too.. Some music uses real instruments, so you will not have any subwoofer bass because…..it’s not there. So the Epicenter takes Mid-Bass (drums,etc) and processes it to play in the subwoofer range, so now you have bass on those songs. But as you could imagine, this is a manipulation of the original recording and it’s rarely needed for 99% of customers. And of course if the song has subwoofer bass already, the epicenter needs to be turned off.
@@SoundsGoodStereo Thanks Don. I'm loving the Utopias/Mosconi Pros in the F250. I think I need to have the roof sound deadened though.
Question what is the blue and grey box used for on the amp rack is it for the factory navigation system and cameras
It allows you to retain the factory stereo, but interface properly into the B&O systems. Here is the link:
soundsgoodstereo.com/products/nav-tv-zen-a2b-dsp12a-a2b-2018-ford-factory-a2b%C2%AE-b-o-or-revel-interface
Whats the Gen z and epicenter used for . I thought that’s why you had the DSP in the front for for tuning ?
Nav-TV for a seamless factory stereo integration
Epicenter for natural music that does not have bass
DSP to tune the system/speaker locations for the truck
These are three different items that do three totally different things. Think of them as ingredients and in a system this level, you need more than typical “table salt” to make it amazing
What's your opinion comparing the performance with Focals you put in the Raptor vs The GB60/GB40/GB10 Audiofrog 3 Way componenets?
We have more experience with the Focal lineup and know their capabilities. This allows us to push the envelope and deliver stereo systems that go beyond what most thought was possible. Plenty of good gear out there, just like ingredients. But it's up to the chef to bring everything together and that's what we do.
Looks good!! How do you run better wire to the front door speakers? Getting through the boot is difficult.
Hey Matt, since we have converted our DC power (before amplifier) to AC current (after amplifier), there is no reason to upgrade the factory wiring. It can handle in excess of 800wrms of power with zero issues. Crazy I know, but this is a common question we get, but people are thinking it is similar current flow as their amplifier power cable kit. AC current = Higher Voltage, less amperage = Small gauge wire. Same as your home wall socket :)
So to connect to the factory wires, we use the Pac-Audio APH-FD02 on the factory B&O systems along with the Nav-TV Zen. Here is the link:
soundsgoodstereo.com/collections/b-o-stereo-integration
Well crap I wasted time running wire and tapped in right before the boot. Did a bunch of googling and most stuff said it needed 16 gaug got 150w rms runnin to doors. Btw thanks for the door block offs they worked great!
Well, atleast you had fun and a story to tell :) Glad they worked for you and if you need anything in the future, just let us know! Thanks again
What was the black DD box in the shots where he was wiring up the amp rack?
It was used to hold the RCA cables while we solder them. We make our own RCA cables so they are the perfect length.
What did you determine the clean signal volume level from the B&O head unit was?
With the ZEN, all the way up is clean, unclipped
On some builds I see you guys using DD Audio 6.5"s and in others I see you using Gladen. Do you all have a preference or is it a case-by-case decision?
We are just exploring our options. We have settled on the Sundown SA series for our downfiring enclosure, it won the battle between all of the current 6.5-inch subs.
What acrylic glue are you guys using? And how thick are those block off plates? They don’t interfere at all?
Block off plates are 1/4 inch HDPE and not sure on the glue. Will have to ask the guys
How much for that same set up and wear are you located?
Love the red one. ❤❤❤
You can buy it, shipped right to your door on our website
soundsgoodstereo.com/
do you make those pillar for any other speakers besides the K2's?
We make them for just about any 3way kit. Here is the link:
soundsgoodstereo.com/products/2015-ford-f-series-expedition-max-custom-made-3-way-component-speaker-a-pillars
I have 2 questions. The block off plates y’all put inside the door panels, would it make better sound quality to put sound deadener on them as well?
The acrylic pieces y’all made for the focal mids & tweeters, do y’all sell those?
Hey Mike,
So adding sound treatment to the block off plates will help marginally, but the problem is it's HDPE (same material as super glue containers). So nothing likes to stick to it, atleast not for a long time. So we just sourced the best, most rigid HDPE we could find to prevent us from having to do so.
On the acrylic pieces, we can make those for you. Just send us a email with your speaker details and car and we will come up with a price for you.
Thanks
Don
@@SoundsGoodStereo sent an email to the address on your website. It’s titled “Speaker Adapters” Hope to hear from y’all soon.
@@mightymike_1 Just found it! I'll run this by Sage and make it happen.
@@SoundsGoodStereo thanks
Have y’all done a 2020 Ram yet with that type enclosure?
Here you go:
soundsgoodstereo.com/products/2019-2021-dodge-ram-custom-subwoofer-enclosure?_pos=1&_sid=f1c86f803&_ss=r
What is the cost P/L on the raptor build same exact build? How long is the vehicle needed?
We need it for one week and you can purchase this exact package here:
soundsgoodstereo.com/products/focal-k2-power-10-channel-fully-active-pre-tuned-plug-play-stereo-upgrade
You guys have anything for extended cab truck all I see on TH-cam is crew cab set ups
We have our parts for the SuperCab on our website, check them out here
soundsgoodstereo.com/collections/2018-2020-ford-f-150-supercab-with-b-o-8-speaker-system/products/2015-ford-f-series-b-o-supercab-scab-plug-play-focal-stereo-upgrade-packages
I need my inputs wired to my mini cdsp in my 09 Infiniti g37. I can do the remaining myself but I’m not comfortable cutting into the factory harness. Can you give me a ball park quote on what this would cost me? I’m not too far from you guys.
Thanks for reaching out. So we do not work on anything except the vehicles in on our TH-cam channel. These are Ford F-Series 2015+, GMC 2019+, Toyota Tundra 2014+, Range Rover Sport 2014+, Ford Bronco 2021+. We stay booked out and these are the vehicle we specialize in.
Those pillars don't look to be OEM with the completely removable handle. Are you custom fabricating those in house?
They are OEM, but for a different Ford truck. Since the handle is removable, we are able to wrap the entire pillar like we want. We ship these across the nation and we even include the new pillars in our price, so you can keep the stock ones if you ever sell your truck.
soundsgoodstereo.com/products/2015-ford-f-series-expedition-max-custom-made-3-way-component-speaker-a-pillars
@@SoundsGoodStereo whst truck did they come from
I’m currently planning on doing a sound system upgrade to my 2019 Raptor but I have a question and seeing how you guys have worked on a few raptors I would like to get your input on something
My brother got a sound system on his 2020 raptor and he had a lot of issues with his build. It could have been from lack of experience from the guys at the shop he went to but he was wanting to use open show speakers on his doors and a set of bullet tweeters and a pair of 8” subs but he was told from the guys at the shop that due to the fact that his truck is aluminum he’s not able to go too big on wattage for his build. He had to settle for a more moderate build.
Have you guys ran into any issues on Raptors because they are made of aluminum or were those guys full of crap and just didn’t know how to set up his sound system. I’m really wanting to go full open show for my mids and go sundown on my subs but I’m afraid that my truck won’t be able to pull all that power. I would be using quality amps that will be able to sustain all those components but would I run into any issues with my truck?
When you say "open show speakers", what do you mean?
@@SoundsGoodStereo the hertz spl show line
So the amount of power has nothing to do with the aluminum, but more of who is designing and tuning the system to ensure energy is not being wasted and you end up consuming amplifier electricity that is being wasted in heat.
Cómo se traduce al español gracias
What's the output on the 6.5 subs
It's impressive, but it's not so much the subwoofers but rather the utilization of the airspace of the enclosure. That's what delivers performance, not the size of the woofer alone.
Make a video for Tacoma 21
Possibly next year we will give Toyota some love 👍👍
Any BOXES for sale I like THESE for F150? COST
Here you go:
soundsgoodstereo.com/collections/custom-subwoofer-enclosures
Are you in Tennessee?
Yes, just outside of Nashville
Where y’all located at
We are just outside of Nashville, TN
Where is scott?
No longer part of the team
How much-needed $
We have Plug & Play packages on our website for these trucks. Check them out
soundsgoodstereo.com/collections/plug-play-packages
I just subscribed cause this video popped up and I'm a Ford f150 guy!!! I accidentally hit the dislike button but hit the like button also!!!
All good!! Thanks for checking it out!!
you doing great work but killing yourself not wearing dust protection , I couldnt believe my eyes that looked like MDF also((
This is why I'll never buy a truck, the smallest subs i need are 15s.
Airspace….. Power…… Displacement…… = Great results 👍
It not a car people it is a truck