PETSFANG BULLSEYE INSTALL ENDER 3
ฝัง
- เผยแพร่เมื่อ 14 ก.ย. 2018
- The standard install of the 2nd Petsfang 3d print. I learned alot from my first print, so now for the best print.... take two. I printed this at 0.2 layer heights with 50% infill, all supports over hang 70%, build speed 60, supports only from build plate, as per the PDF off of thingiverse.
thanks for watching.
this is my you tube channel
LED mount file form thingiverse
www.thingiverse.com/thing:310...
petsfang bullseye
www.thingiverse.com/thing:275... - แนวปฏิบัติและการใช้ชีวิต
![TREASURE - 'KING KONG' COMEBACK SPECIAL [THE TREASURE SHOW]](http://i.ytimg.com/vi/Jx1wyMaQzf0/mqdefault.jpg)
The background music made me think something really sad just happened. "PETSFANG BULLSEYE *burned my house down*
lmao..
Noob
Petsfang bullseye didn’t burn your house down
Cringe
Becoming a man is always bittersweet...
I bought a leather patch from you a few years ago and have been following you on Instagram since. I'm glad you have a TH-cam channel now with the same printer as me. I'm currently printing the bulleye now as I didn't like the version of the Hero Me duct I had.
Thanks for sharing William, Im new to 3D printing business and I also build FPV drones.
Very helpful video. Just finished printing the bullseye for my tevo tornado for an E3D v6 upgrade. Since the tornado was now working unprinted the entire bullseye with an Elegoo Mars and it came out really nice. Can't wait to get it all back together.
Thanks for the LED mount, I used a Neopixel STICK, RGB, and I'm hoping to use it in future to take advantage or Marlin now having neopixel temp light colour changes. For now it's just white. Resistor and cap added as advised by Adafruit.
Interesting video. Greetings from Belgium 🇧🇪
I know nothing about electricity or electronics but the wiring and dimming of those LED lights look are something I would love to install. Just won’t know how to solder it all together. BTW I ordered my Ender 3 two weeks ago from GearBest for about $155 and a few extra dollars for the insured postage.
I’lol keep following your channel.
Thanks for sharing your build. I was looking for exactly like. I was going to buy extra screws but I saw this and realized that I didn't need them. Were you able to compare cooling performance vs your previous duct?
Hey, thanks for posting this install vid. I am trying to learn how beneficial these fan ducts for various filaments and print settings. Did you end up running identical test prints after installing in order to compare print quality with the previous fan duct?
Hello! Thanks for the video! I have a small suggestion to chop the end of your hex key off to renew the bite if it gets worn down.
Thanks for the video. Was really easy to assemble following your instructions !
Thank you! greets from Slovenia
I’m new to printing. I’m enjoying it and enjoying learning from this channel. In what aspect does this upgrade benefit the overall quality of 3D printing in general
Ok so I guess I didn't install mine exactly correct. I didn't use the the two Phillips screws you used it seemed to lock in tight without them. I've been running it that way for about a month now without any problems. I think I'm gonna put them in though. Thank you brother for showing me the way.
The petsfang is the best UPGRADE....i will have a video on the led light set up vwry soon.
Oh yeah the guy who designed the bullseye sent me a email and the two screw on the right side are for the bed leveling upgrade and you dont need them. I will talk about this on the LED wire up.
@@williamwolfe1986 oh ok. The two screws must be to tweak it for the bed leveling sensor. I'll have to make sure I catch your video on the LED's. I have them on both my Anet's but this one is 24v. I just got my 2018 Tevo Tornado in today and I'll be putting a Bullseye on it along with lighting that one up too. You just got a new sub. 🙂
thanks for this video! the pdf is straight forward but who doesn't like getting the chance to see someone do the thing they're about to try out for the first time lol. thanks for sharing :)
Video starts at 4:30, but its great.
May I know the size of the screw you used for the Bullseye connecting to the mount (left and right part)?
You can use your wrench that came with the Ender as your adjustment tool for the height of the fan shroud. Just drop everything down to the plate then use the wrench as a height tool, from there tighten the shroud and you should be good to go. It just makes it easier than trying to hold everything up in the air.
Other than that very nice install video.
Thank you for the video. What size of alan key do you need for the first two silver screws? None of my alan keys seem to want to fit this properly. Thanks!
yes thats my problem too.
Nice design
Thanks for sharing 👍😀
Hi, just wondering why you didn't import the petsfang stl into tinkercad, then combine it with your led bracket. That way you wouldn't need to super glue it on.
How does your Z axis move so easy? I need to push it a lot more to make it move down. Does it need to be like that?
Haha, I forwarded 3 times in a row and all I heard was "um" "um" "um"
wtf.. same here!
that soundtrack is killer man
I Feel like I know the first track playing on the background... Is it from surviving Mars? does anyone know the name?
which bed adhesion did you use ? I have a Mirror Bed tho and I want good adhesion
Thanks for the video. I just have my printer and looking to print a Petsfang Bullseye where can i download the 3D Model. Thanks in advance.
Thanks for the video.. The talking didn't bother me whatsoever. And like some others, I found the music calming. I may play it while I assemble mine.
The bolts and nuts on the side near the back plate aren’t needed unless you’re gonna use the bltouch on the right side. Took me a minute to figure it out but yeah. You can see the attachment in one of the photos on thingiverse.
for the front fan on the fang itself, the assembly instructions read to put the screws in from the back. doing that, it wouldn't matter if you used the long or short screw then :)
After watching the vid and then looking at the pdf instructions myself, I don't think he spent enough time actually reading the instructions. Other than a few discrepancies I think it was a good video.
This is a wondeful upgrade. I just want to take some of the fear out of it. I was so brave...lol
Thank you, helped me a lot. I also appreciate background music. You seem to be a man of culture ;)
I need help, I installed the bullseye and everything correctly and had a flawless test print but now my prints are skipping layers, not extruding enough in some parts and do not look so great. Any advice?
at 16:58 the screws should be done from the back side forward, basically reverse your direction, the walls are thinner on the other side and use the stock screws that were previously used for the duct fan.
hello! im currently printing the bullseye for ender 3, could you please tell me what other screws i need? else than those that are already on my hot end cover.
Great tutorial, but I have to go for the vent ring because Creality just tightened one of the two screws so hard in that I just hollowed it out trying to get it out. Now it's stuck in there forever :-/ and no way to get the vent casing off. Was the ring good?
if you have a dremel or similar tool or maybe even a junior hacksaw (but this will be hard to use) then cut a slot in the stripped head and use a normal slotted screwdriver to remove it.
William i have an Ender 3 i'm very new in this field,how can i print the Petfang Bullseye.Is there a place where i can buy one.I love your Videos Thank you
Is your z belt driven? How's that workn out for ya?
How long are the M3 screws you used?
just gave you the 1000th up vote, well done on your video
Can you make a video of how to install the led light bar and connect the wires?
PLA low glass transition temperature does not affect performance ???? What benefits are you getting with new shroud ?
Also surprised how easy you can really move your Z axis - on mine it is not possible to do so THAT easy...is it normal or you just loosen something during installation?
I think i got lucky the mount is a true 45 ...my second ender not so lucky going to have to work on her soon. Thanks for the post.
@@williamwolfe1986 What do you mean a true 45? That the mount is at a true 90 degrees right angle?
Do you have stock fans and a stock hot end on your ender 3 if so what files do you print? There are only 1000 (seems like it anyway) files and I'm not sure what all the abbreviations are. Could you please reply with the file names I need to print? I've downloaded them and think I need to print "BULLSEYE_BASE_CREALITY_9.27" and "Bullseye_Duct_9.27" Thanks
Верхний вентилятор нужно прикручивать с другой стороны. Там отверстия большего диаметра, да и винты тогда можно использовать короче.
does your part cooling fan rattle any with this? its rattling on my copy.
what do you think petsfang + noctua fans ?
William i'm brand new in the 3d printing business.I have a Creality Ender 3 ,where can i find the file to build the Petsfang Bullseye.Any info please
How did you get all the support material out of the screw holes? I am having the hardest time getting it all out. I followed your settings and it printed beautiful but the support material is on there good.
Print it with support from buildplate only, then it won't generate supports inside the holes.
Johan Svensson well, in my case Slic3r was still able to create some support inside the bullseye -.-
I discovered it during the being. Before the upper part was closed, I paused to print and removed everything. ... at the end of the day, that paused layer was a weak spot :-/
Thanks so much for this video! I tried to install this mod last week but somehow managed to print the wrong size parts for my stock Ender,. Please keep these videos coming, they are super helpful!!
There are so may parts. Wich parts are needet for Ender 3?
Can you say something about the led dimmer?
Can you post the site links for the leds and hardware to get them working please.
where'd you get the stl for the spiral thing?
Tip: put he screws for the front fan from the backside. Doesn’t matter how long the screws are, easier to assemble
Yep, that's what I ended up doing. Use the short screws, install from the back side.
I found that for some reason the back holes didn't seem to line up and it started to put pressure on the bracket but they fitted fine from the front!
What is the purpose of this install over the stock fan ? What does it do differently ?
I think the part fan screws are just being run in from the wrong side?
Song is I Am a Man Who Will Fight For Your Honor by Chris Zabriskie
any difference with the stock one?
about to install mine :) Thanks for the video. The heatblock wires are a bitch to get out of the way, yeah?
Thanks for this video!
Do I need to buy anything to do the upgrade?
this is what i miss about youtube. real people making real videos. gets frustrating when every other video is, "what's up guys its ya boy (insert name here), before we get started smash subscribe." oh and raid shadow legends
this helped me a lot ty!
the link to thingiverse it's not the good one.. Could you update? Thanks
Hello, it seems my cooling nozzle fan is blowing the air the wrong way (not sure be it seems the air is grabbed from the nozzle and expulsed by the fan. I don't feel any air suction from the fan), even if i made sure the fan is mounted right on the bulleye. Any lead ? could it be linked to inverted poarity on the motherboard ?
If i put a sheet of paper in front of the fan, what should i see ? should be pusheed away from the fan or sucked in ?
Im confused. The instruction pdf says I need nuts for the screws, your video doesnt mention them tho.
Also: what kind of screws do I need to fixate the second part?
I am pretty sure you figured it out by now but you just use m3 nuts and plug them into the 4 holes that you find on the first part. I fixated the second part with m3x8 screws. YOu can buy a 15€ 500 nuts and bolts pack on amazon, which is pretty nice to have.
@@Benutzername0000 yep. You are right. Great video.
Yhe 2 screws on the back right that you said was to lock it to the back plate are not for that they are for the abl bracket
Hown did you removed the supports inside the duct itself where the air goes trough??
It's not even a probably, this is the best setup for stock fans. Easy, perfect air flow layout, esthetically cool, pretty solid design. Print it with support "touching baseplate" and "80 overhang". You can also add a plate to put whatever you want for the name to cover the bullseye logo. All in all this is the perfect setup. I think if there was 1 thing I wish was done differently, was if they made it so the nozzle was a little more visible. The petsfangs were cool cuz you could see pretty much everything but this could have put the nozzle a little bit more forward or the bullseye unit sit a little higher so the nozzle is easily seen. Otherwise this thing really is perfect......oh and the wire tower....cut it off it's useless lol
Link to the led lighting?
Thanks for the video! Just FYI, the Ender 3 Pro's blower mount is a bit different and does not fit into the bullseye straight away. It requires a bit of modification :(
same here
Is it the same process for the ender 3 pro?
Take it from anyone in the RC world and get yourself a set of MIP hex drivers. No more stripped hex screws. There’s a time and place for Harbor Freight tools. Small hex drivers are NOT the case.
Hi William, sorry but i can find the bullseye pipes on thingiverse or somewere. the support i already have... Can you tell me where i can find it ?. thanks
Read down the page on the thingiverse page, there's a link to which to print.
To WIlliam. don't let people complaing about the ums bother you (the music is annoying a little just because it does not "fit" the content but not a big deal)
if you "would like" to work on the um's just remember. try to be silent when you want to say um. trust me I know your brain whether you realize it or not is saying "silence silence bad have to say something" (which is why we say um) but trust me the silences is a second or two at most people won't even notice. no worries.
sometimes it helps to do a dry run of the video first and then record it the second time. I don't usually do this since IT IS a lot of work and you are providing this content FREE with no monetization just for the better of everyone else. Kudo's to you!
Speak outloud more. talk to yourself in the mirror. it will help you to be more conscious of when you say um and teach you to "just say nothing at all" instead of the ums.
I have a ton of videos and I STILL freaking say UM now and then. its a hard habit to break :-)
Thank you for providing good useful content to people free of charge! I wish you success!
I did not find the STL file for this Petsfang Bullseye on Thingiverse, only one without cable support. and the front part
Man that music sounds like a funeral home. I can't take it! LOL
Other than stock screws and nuts, what other exact screws and quantities do I need to purchase?
I just installed this. I do a lot of custom drone building and had a pile of M3 & M4 screws. I think any short M4 screw would work fine. I ended up using M4*10. I bought this a while ago: www.amazon.com/gp/product/B071KBVZVV/ I've used the m4 washers to keep the bed springs from loosening too.
7:00 the thing is unless you're upgrading the fans you're really not doing much from stock except directing airflow to the opposite side while reducing the overall airflow to either side. The entire point is to change the fans to more suitable options.
@William Wolfe i need a petsfang bullseye with Bl touch mount?
Where can I get the petsfang bullseye from as the link is not working
hey bro, send me link from this support of gopro in front of the table and thanks for this video :D
You should warn about moving the z axis up and down, you got the blue screen of fry... Possibly frying the board if people watching this get a bit too enthusiastic lol. They're creating the basics of a generator when the screen gets powered by the motion.
Good advice! At least you didn't complain about music we barely here or him saying um...
Great video in my opinion
Quick question William Moore; would installing the smoothers prevent the generator effect? From what I understand they limit the flow of electricity to one direction, right?
Instead of changing it you need to clean your fans it helps cooling much more than you think.
Will this work on the Ender 3 pro?
Where do you wire in the led to?
It has it own pwr. Not on ender 3 system
I used the same 12V LEDs and I added a 240R resistor and wired directly in to the always on fan. All I want is light when I’m printing and no need for dimmer etc. LEDs take 40mA so a regular resistor should be fine for power ratings.
I cant find this bullseye file anywhere. Why is that? everywhere that i click on the file is gone.
at 14:50 your about to tell us what screw your using.. and then dont... and never do.. so which screw are you using?
Good tuo but he link is broken on thinkgiverse .... a new link ? thanks
Anyone's have the link for the bullseye because the second redirect to a random thing. Thanks!
Whats the material for this? PETG?
What material?
How do you connect the two pieces ???
Which files for ender 3 v2 bl touch stock fan and blower?
Does this work with ender 3 pro?
File from the ring you took off?
www.thingiverse.com/thing:3079610
Your link for the Petsfang Bullseye has gone bad, it links to some unknown object. Any chance you could repost them to Thingiverse or shot me the new link. Stay well William, Cheers!
I took a CS101 course that said uh after every other word and banged my head on the desk after a week everytime it happened.
I got to be more disruptive.
the screws used for bullseye duct are to small. its like the holes are way bigger...
Do you have to link for groot?
I don't know why but the two holes for where the duct connects to the base is too large when I printed it. The M3's are too small.
Points and thumbs up for the camera angle and concise build. But come on, man, clean your fans!