Reduce fuel consumption How to increase your bike mileage (Carburetor Setting) Mileage keise badhaye

แชร์
ฝัง
  • เผยแพร่เมื่อ 12 ส.ค. 2020
  • Hello Friends,
    As every bike has a engine (motor/mill/muscle) and
    a carburetor (breathing system/heart with the output
    - Silencer. All the single cylinder bikes is built in 2
    stroke or 4 stroke with a carburetor.
    A motorcycle of 150 cc should give average mileage
    of 35 to 40 km per litre. But it differs from road to road.
    Generally we get mileage in highway but not in city.
    So, When the bike become old or the setting of a
    carburetor has been disturbed, then the fuel consumption
    may be high and there must be some problem with mileage.
    That’s the common problem we faced everywhere.
    So, for this we need to check up the air cleaner and spark
    plug. Besides this there may be another reason of high
    fuel consumption is due to dust in air cleaner. So, air
    cleaner should be cleaned up properly. After removing
    the spark plug, if the spark plug is wet or seemed to be
    black in color at the end point, then no doubt, its
    consuming the fuel at a certain label where a normal
    bike doesn’t. For this we need to clean the spark plug
    properly and reinstall it. Now lets check the carburetor’s
    setting. For this engine should be heated up first for
    at least 5 minutes. After heating we will increase the
    RPM of the carburetor. Basically there is 2 (two) types
    of carburetor in a bike - 1) Butterfly type and 2) Piston
    type. Remember Bajaj Pulsar, TVS Apache, Royal Enfield
    and some others bike have butterfly type carburetor and
    Bajaj Avenger, Yamaha FZ and some other bike have
    Piston type carburetor. There is 2 (two) adjuster present
    in carburetors - One is RPM (Slow race) adjuster and
    another is Air fuel mixer tuner. So for adjusting a carburetor
    engine should be started first and RPM of the carburetor
    should be increased to 40 speed. For this we can see on
    RPM meter and adjust the RPM and the bike with no RPM
    meter should be adjusted the RPM with an idea of an
    engine’s sound. Remember the meter shown should be
    in steady. So, after adjusting the RPM to 40 we will tight
    the air fuel mixer tuner to the end point, the slowly un tight
    it to the 2.5 to 3 round (ring) or will tune up to the place
    where the engine RPM is high. And after tuning again we
    need to tune down the RPM adjuster to its normal i.e. at a
    certain label to 1.5 on the RPM meter. Now the carburetor
    is fully tuned. Some carburetor’s air fuel mixer tuning is
    quite opposite from the other as it tights up where the
    other untights in the same directing of its tuning.
    So, this is the process and perfect setting of carburetor
    of any bike for better mileage.
    Just help to grow my channel by-
    LIKE, SHARE & SUBSCRIBE (its free)
    Thanking You
    Regards
    #BajajAvenger #Fuel #MileageProblem

ความคิดเห็น • 68

  • @indirasinghadas9746
    @indirasinghadas9746 3 ปีที่แล้ว +1

    Thank you Sir...aap bahut acha video banate hain👍

  • @michaelandew8266
    @michaelandew8266 3 ปีที่แล้ว +1

    Great boss.. very helpful video. Thanx

  • @a.s.j.1982
    @a.s.j.1982 ปีที่แล้ว

    thanx sir for making this informational video👍

  • @amitkrupal1234
    @amitkrupal1234 2 ปีที่แล้ว

    Nice and informative

  • @shamitube
    @shamitube ปีที่แล้ว

    Tried today. Lets see how it goes

  • @anitasingha7824
    @anitasingha7824 3 ปีที่แล้ว +1

    Nice

  • @ganeshkhodave7054
    @ganeshkhodave7054 2 ปีที่แล้ว

    Nice info

  • @vclipper8209
    @vclipper8209 3 ปีที่แล้ว

    Nice bhayya ji✨

  • @amitkrupal1234
    @amitkrupal1234 2 ปีที่แล้ว

    For past 4.5 yrs I am getting consistent 42km/l on tank to tank basis in city only, but in extreme stop n go traffic got 35-38 km/l. Fortunately on highway at speed 70-80 kmph I get 45kpl

    • @technicalnchandra2528
      @technicalnchandra2528  2 ปีที่แล้ว +1

      U r getting perfect and awesome mileage which others are unlucky to get. Carry on bro.

    • @amitkrupal1234
      @amitkrupal1234 2 ปีที่แล้ว

      @@technicalnchandra2528 Thank you

  • @krishnakitti-qu6dl
    @krishnakitti-qu6dl 3 ปีที่แล้ว +1

    My pulsar 180 3.5set hoga is thr any problem if I set 2.5 engine heating too much please reply sir

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      Sir, normally Pulsar 150/180's default tuning setting is 2 to 2.5 but for better and perfect result you can adjust by RPM of the engine as per shown and discussed in the video. And about the engine heating issue, make sure to set the engine's RPM (slow race adjuster) in its normal position after being tuned. After all if heating still persist, then no doubt, its not for carburetor issue. Thank you.

  • @neerajtobdiya2613
    @neerajtobdiya2613 3 ปีที่แล้ว

    Sir mere pass avenger 220 cruise h 2016 modal avrage kitne per set kare

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      Dekhiye agar achha mileage de rahi hai to setting ka chher-chhar mat kijiye. Aur mileage kam de rahi hai to set kar sakte hai. Best tune karne ke liye engine ki RPM ki awaj se perfect hota hai jo vdo me dikhaya hai.

  • @hrishikeshvankore7706
    @hrishikeshvankore7706 3 ปีที่แล้ว

    hello sir bajaj avenger 160 street bs4 mai 43 ki milage aa rahi hai kitne round set kare plz

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      Basically 160 CC engine's mileage around 40-45 is normal & average. But still if you want to test you can do it. And for an engine that may be 150-350 cc, it doesn't mean to have for a specific rotation. So, the best way is - heat up the engine first then tight the mixer to the end point and increase slow race tuner so that the engine doesn't stop. Engine RPM will be little high so don't worry. After all loose the air mixer tuner slowly to a certain position where the RPM of engine is very high. Lastly after setting mixer tuner to its proper position, adjust the slow race tuner to its normal position so that engine does not gets off (Slow Race).
      Thank You

  • @VishalKumar-eu2os
    @VishalKumar-eu2os 2 ปีที่แล้ว

    Sir please reply mere paas yhi bike Hai bhot km use kri Hai es Bike m Kitna patrol Hona cahiye Jo wo meetr m dika de please reply

    • @technicalnchandra2528
      @technicalnchandra2528  2 ปีที่แล้ว

      14 liters Petrol hai iska fuel tank capacity aur 3.4 liter me reserve tank fit kiya gaya hai. Isliye kamse kam 3 se 4 litres ka petrol ho tavi accurate dikhayega.

  • @sayyadraj9163
    @sayyadraj9163 6 หลายเดือนก่อน

    Bhai maine avenger 180 street me honda unicor. Ka jet lagaya meri bike ab city me 55 ka average deti hai or out of city 68 ka

    • @sayyadraj9163
      @sayyadraj9163 6 หลายเดือนก่อน

      Or carburetor setting 10.5 par rakho

  • @him11292
    @him11292 2 ปีที่แล้ว +1

    800 ke petrol में 180 km चली hai Avenger 150 street kya ye sahi hai??
    Btao pls

    • @technicalnchandra2528
      @technicalnchandra2528  2 ปีที่แล้ว

      Sahi nahi hai, petrol bahot jyada consume ho raha hai

    • @nishantpandey1060
      @nishantpandey1060 ปีที่แล้ว

      Bhai same haal mera bhi h mechanic kehta h engine khulega mai kya karu samajh nhi aa rha

  • @ShubhamSingh-hi5qy
    @ShubhamSingh-hi5qy 2 ปีที่แล้ว

    Sir avenger ka speedometer glass crack ho gya h same apke jaisa .. Uska solution btaye ..naya glass kaise lgaye

    • @technicalnchandra2528
      @technicalnchandra2528  2 ปีที่แล้ว

      Solution hai, glass wali dukan me jake iska same size ka glass katwakar laga sakte hai, ya to pura speedometer change karna padega.

    • @ShubhamSingh-hi5qy
      @ShubhamSingh-hi5qy 2 ปีที่แล้ว

      @@technicalnchandra2528 thank u sir aur ek doubt hai.. Jaha rubber button k ched hai uska kaise kre.. Vaisa to glass wlaa nai bna skta

    • @technicalnchandra2528
      @technicalnchandra2528  2 ปีที่แล้ว +1

      @@ShubhamSingh-hi5qy Wohi uske bare me bhi batane wala tha, sorry bhul gaya tha.
      Agar ched me diya hua button kaam karta hai to ched karna padega, nahi ton weise hi band kar do, no problem aur bhi achha hai paani leak nahi hoga.

    • @technicalnchandra2528
      @technicalnchandra2528  2 ปีที่แล้ว

      @@ShubhamSingh-hi5qy Sabse better solution hai plastic coated glass. ek achha quality ka dekhiye aur isme garam karke ched kijiye. All the problem will be solved, weise toh mera wala bhi eise hi change karne wala hu. Thank you.

    • @ShubhamSingh-hi5qy
      @ShubhamSingh-hi5qy 2 ปีที่แล้ว

      @@technicalnchandra2528 ap change krenge to ek video bna dijiyega .. Ye bht logo ke me same problem hora h aur company alg se glass bi nahi deti 🙏

  • @sumandalal5959
    @sumandalal5959 3 ปีที่แล้ว

    Mera avenger 150 jab 60-70 k upar speed Jata Hain tab bike bhuk bhuk karta Hain ,,jaise lagta Hain petrol khatam ho gya Hain,,is Karan Kiya Hain G ?

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว +2

      Iska 5 karan ho sakt hai. (1) Low current supply (2) Spark plug (3) carburetor tuning (4) valve (5) Air cleaner problem.

  • @sanjukurian7608
    @sanjukurian7608 3 ปีที่แล้ว +2

    Hi sir,
    Am using Avenger 220 bs3 model, milage is too low ( around 35 only),
    Please tell me how many times screw needs to rotate...
    Please reply

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว +4

      Basically 220 CC engine's mileage around 35 is normal & average. But still if you want to test you can do it. And for an engine that may be 150-350 cc, it doesn't mean to have for a specific rotation. So, the best way is - heat up the engine first then tight the mixer to the end point and increase slow race tuner so that the engine doesn't stop. Engine RPM will be little high so don't worry. After all loose the air mixer tuner slowly to a certain position where the RPM of engine is very high. Lastly after setting mixer tuner to its proper position, adjust the slow race tuner to its normal position so that engine does not gets off (Slow Race).
      Thank You

  • @PrashantKumar-ze4ly
    @PrashantKumar-ze4ly 3 ปีที่แล้ว

    Sir bajaj platina bs4 2015 me BC screw ke kitne round kholne h plzz tell me sir

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      Dekhiye, generally 1.5 to 2 round to jaroori hai Khas karke 100 cc bike mein, lekin depend karta hai engine ki condition ke upar. Kavi-kavi 2.5 tak lag sakti hai. Isliye engine ke RPM ko follow karke adjust karna hi best hota hai. Thank You.

    • @PrashantKumar-ze4ly
      @PrashantKumar-ze4ly 3 ปีที่แล้ว

      @@technicalnchandra2528 thanku so much sir

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      @@PrashantKumar-ze4ly Welcome bro

  • @afzalmirza9341
    @afzalmirza9341 3 ปีที่แล้ว

    Bhai meri avenger 220
    2015 model hai or wo 22 se 25 ka mileg de rahi hai please help me

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      Bhai, jeise vdo me dikhaya gaya hai, usey properly follow karke try kare. Bajaj 220 ka mileage average around 40 dete hai, lekin isme toh kam se kam 30-35 dena chahiye. Let me know after u try it.
      Thank You.

  • @sanjaynath222
    @sanjaynath222 3 ปีที่แล้ว

    Sir mere pas avenger 220 street hy. Bs4 model ka. 20-22 mileage deta hy. Oil-air mixture screw kinta round pe set karu?. Pls hpl me sir! Koi bol rhe hy 5 aur koi bol raha hy 2.5.
    Kya karu sir.

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว +1

      Dekhiye brother, Avenger 220 Steet me kam se kam to 30-35 mileage dena padta hai. Ap apne bike ka plug ko khol kar check kijiye ki, plug ke end point me keisa color hai. Agar ye black color hai to ap sure jo jayiye ki ye bike 100% petrol jyada khaa raha hai. Aur agar air mixer ko tune karna chahte ho to round pe bharosa mat kijiye, kyu ki ye round bike ke upar nirvar karta hai ki bike kitna purana hai, isiliye tune karte waqt iski awaj se pehchane jo meine vdo me dikhaya hai aur ye hoga best aur perfect setting.
      Thank you

    • @sanjaynath222
      @sanjaynath222 3 ปีที่แล้ว

      Maine mixer screw pura tight krke fir RPM ko high krke mixer screw ko dhila krna start kiya to screw 1.5 round me bike rage krna start kr diya. Maine wahi RPM ko low krke adjust krke rakkha hy. Lekin low RPM me bike ka sound on-off jysa fluctuate kr raha hy. Mera bike 3yr 4 month purana hy. Pehle maine long me mere bike 38-40 milage deta tha.

    • @sanjaynath222
      @sanjaynath222 3 ปีที่แล้ว

      @@technicalnchandra2528 sir maine plug ko khol ke v dekha tha to plug ka end black tha. Use kaise clean kru?

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว +1

      @@sanjaynath222 Bro, Plug ka end mein black hai matlab apka bike jarurat se jyada tel khaa raha hai. Iske liye carburetor ka sahi aur perfect tuning jarurat hai, isko ap avenger ki vdo me follow kar sakte hai. Aur spark plug ko keise saaf kare ise dekhne ke liye is link par click kare aur is vdo me dekhe th-cam.com/video/9IUSFZZ0gbE/w-d-xo.html

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว +1

      @@sanjaynath222 Sir, apka bike on/off jeisa fluctuate karega kyu ki ye 1.5 rouund sahi jagah nahi hai. Ap aur ghumake dekhe ki RPM aur badta hai ki nahi, aur jaha pe RPM jyada hota hai ussey bhi agey badake dekhe. Agey badane se agar same rehta hai to fir wohi jagah pe wapas le ja kar ruk jaye jaha RPM sabse jyada ho. Wohi jagah best tune hoga. Thank You.

  • @fit.karamjeet
    @fit.karamjeet 3 ปีที่แล้ว

    Sir my avenger 150 heat so much 1 ya 2 km chlne se bhi engine heat hota h aur average bhi 40 kaa deti h kya kru sir btaye

    • @fit.karamjeet
      @fit.karamjeet 3 ปีที่แล้ว

      Reply kro sir

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      Check your engine oil (mobil) whether its in right label. Carburetor setting: The mixture of air and fuel entering the engine cylinder must be correct in order to overcome overheating of the motorcycle. If air/fuel mixture entering the engine is lean then there are chances of your engine overheating. Also low engine oil will lead to inadequate cooling of the engine. Thank you.

  • @syedlucky311
    @syedlucky311 3 ปีที่แล้ว

    Sir mera Avenger 150 street h Or mera 25/30 ka milege de raha h jb k me clutch plate v chnge kya phr v milege ni deraha mujhe kya krna hoga

    • @syedlucky311
      @syedlucky311 3 ปีที่แล้ว

      Sir please reply

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      Apka avenger ka clutch release karte waqt pick up keisa hota hai ? kya bike chalte waqt jyada awaz deta hai aur run kam hota hai?

    • @syedlucky311
      @syedlucky311 3 ปีที่แล้ว

      Nhi sir pickup p accha h Or sound v smoth h

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      Toh air fuel mixture ko sahi tarike se set kare, Air fuel mixture kitne round ka hoga ye depend karta hai bike ka engine condition ke upar. Isliye apko engine ki RMP awaz ko sunkar adjust kare, wo apko best result dega. Iske liye vdo ko achi tarah se dekhe jo dikhaya gaya hai. Aur ha tyre pressue ko v check kare, jyadatar log ispe dhyan nahi dete hai, lekin ye tyre pressure bhi mileage kam hone ka ek bahut bara karan banta hai. Thank you

    • @SomnathDas-ot6bk
      @SomnathDas-ot6bk 3 ปีที่แล้ว

      @@technicalnchandra2528 ye mera hotah hai and millage 35 de raha hai

  • @vclipper8209
    @vclipper8209 3 ปีที่แล้ว

    ❤️🌹🥰

  • @ordinaryman462
    @ordinaryman462 3 ปีที่แล้ว +1

    Bhai meri Avenger 150 jo hai wo 50 ka mileage deti hai

  • @rayaan6311
    @rayaan6311 3 ปีที่แล้ว

    But there is no RPM meter in avenger

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว

      U r right bro, thats why RPM display of Pulsar is shown to make understand. You can tune it without RPM display by hearing the sound (high race) of the engine. Thank you.

  • @nishantpandey1060
    @nishantpandey1060 ปีที่แล้ว

    Bike dhua zyada de rha h

  • @vatsalsrivastava8794
    @vatsalsrivastava8794 3 ปีที่แล้ว

    My avenger 150 is returning a mileage of 27 only... what to do?☹

    • @technicalnchandra2528
      @technicalnchandra2528  3 ปีที่แล้ว +5

      Check your carburetor setting, if required tune it as shown in video moreover check the wheel of your vehicle whether its free circulating or not. Low pressure in tyres can greatly reduce fuel efficiency, Tyres require air to stay in proper shape or else all they will do is create rolling resistance, this makes it harder for the wheels to move and hence decreases mileage. The first thing to do is to check your bike's tyre pressure. Thank you.

    • @itszishan8061
      @itszishan8061 2 ปีที่แล้ว

      Ur mileage fixed ?