This was my first hobby grade rc car. No regrets and seriously no complains! Only recommendation is to definitely use some thread locker on the nuts to keep the tires on as well as any other component that may come loose. Other than that, no issues.
I Love this little car! Swapped the motor and esc, receiver and steering servo. OMG! 3s velineon system and mini e revo steering servo with dumbo transmitter.
I’ve had one of these since it came out, had mine before they became well known and popular, currently have £270 put into it on upgrade parts, maybe I went a bit over the top but it’s probably one of the nicest ones arouns
Awesome little car. Mine also stripped a diff gear but after about a month of regular use. From the factory it doesn't have enough grease in the diffs so popping them open and adding grease before you start riding is a good idea.
@@lucasburke6099 for the ring and pinion gear you can use regular grease. For inside the diff you get specific silicone based grease for RCs that you put in the diff that is dense enough to give you limited slip type performance. I use Team Associated 3000cst but this is up to personal preference
Great car! Two things to be careful with: 1. The ESC goes into Low Volt Cutoff very low at about 6.3v. 2. The thermal cutoff does not seem to work. During hard grass bashing, I heard a "pop" and the ESC let it's smoke out. The plastic was melted and the heatsink was hot enough to fry a pork chop. The temp cutoff should have not let it get hot enough to melt.
Goes to show the amount of mark up losi and the likes make when 99% of the car is plastic and three times the cost of one of these. Transmitter is also infinitely more pleasant to look at than the offerings of losi team associated and traxxas. Not sure why but those companies are incapable of making a non ugly transmitter. They are highly offensive lol. HPI makes the most handsome transmitter imo tho.
I got this for 99€ In my country when it went on discount, and my god it was the most worth it purchase I have ever done! This little thing has given me so much Joy :D
Great video guys, yep I've been hearing a lot about these too. So I just ordered two, one for me and one for my mate. Ha, race then bragging rights. Lol. Thanks for sharing. John
looks an upgraded version of the 959 the only problem I have had with mine is dirt getting into the spur gear via the open chassis slot underneath you may just need to clean off the motor and spur gear to get rid of the crunching a piece of tape to cover the slot will help keep dirt and sand out
Update: It arrived yesterday. I took it out to the park today and ran it on the concrete and the grass and this little car RIPS!!! Gosh I didn't know what I was getting. This thing is a blast. A buddy of mine and I do our park runs with my cars and we drive them around out there and my little WL144001 outruns my old Associated RC10. Not by much but it does. It is really impressive!
Who cares how good and cheap it is, when something breaks you have to wait several weeks for the parts, no hobby store in this country carries parts for these things...
Ha! You know, I used to think the same thing, but more and more hobby shops are starting to sell these things, and there are tons of Ebay sellers that buy them and part them out. Just something to consider.
@@Professor-Scientist I don’t sell RC cars. The only ones I sell are to my friends so I can still drive them from time to time. I’ve given away lots of RCs though......
I have four 144001 and I want more. Totally addict. Made more than 130 batteries runs and differentials are like brand new but greased before using and doing maintenance every 20/30 runs. Only things that are taking punishments are the tires but still alive.
Hi Guys, love all your rc car videos! I have heard that the wl toys 144001 comes from the factory with dry differentials, like many rc cars. I neglected to lube mine on a deerc 302e and when it started clicking it was too late. I lubed it and it locked up when I test drove it, thankfully it's only the rear one!!. I'm wondering if the noise you hears in yours is one of the diffs starting to go south. Just some friendly advise. Note, replacement diffs are availale for wl toys for about 15 - 20 bucks on amazon, but lube it when new, then it's no more worry and you save several bucks. Thanks and keep up the good videos!
That's actually a 550 brushed motor... Awesome litte big car. We been running one for a year, can't complain... Have 5T brushless system and new radio waiting but the thing hasn't broken yet. I've had to tighten turnbuckles for alignment. It's a favorite in our pack. We dismantled and lubed pre-use.
the brushless one is faster than the HYPERGO brushless 4x4 truck. I own both using 3S lipo 2200mah. I clocked the HYPERGO on my GNSS GPS ran 42mph on 3S. The WLTOYS have not gps yet but it will walk by the HYPERGO side by side!
@@10thScaleGarage It was the least I could do, as I got him back into rc's. It is a LOT more fun driving/flying with other people. (and laughing at their crashes ) haha..
Got 2... one stock... the other 6 cell... fpv.. Get metal gears and tighten the diff..by slightly curving the shim inside the diff... good lube too... HAMMER TIME.
Yeah man great review, these things rip for very little cost. Got two last year, me and my son attach a Gopro hero7 to one, go to the park and have a great time racing and making movies. My kid is only 6 and can keep this RC moving with bumps, jumps and turns. The 144001 is a nice easy way to bash RCs. Take Care👍🏾👍🏾👍🏾
My friend bought me this for my bday ( he lives across the country) and I had no idea what I was walking into since I've been out of the RC car game for aaaages. I had a RC10 B3 that had some slight upgrades, so some pre-assembled thing? Expected it to be just ok. Uhh, this thing is better built, faster has 4W drive and I'm blown away. My old car cost something like ...$150 just for the frame which didn't come assembled, I think it had the motor? But no servo or speed control, receiver, controller, etc. So it was another $70 for an electronic speed control and IDK how much for the servos since I think I just used one my brother had from the early 90s that he had in his King Cab. So for $130 for something that's this fast and ...pretty damn durable? I'm blown away. My first crash with the old B3 destroyed the shocktower because- naturally they made it out of graphite for some bloody reason. My first crash with this car broke 1 of the arm joints that took 5 minutes to replace.
Yea. Only prob I have with low budget rc’s like this is they have no slipper or center diff. So you can forget bashing. All that shock and sudden acceleration off the jumps go straight to the spur and strip it out and likely is a pain to access to remove. Like who really wants to drive a buggy or monster truck in the parking lot
Yeah. I haven’t driven it in a parking lot since. The thing is less than $150. You gotta save money somewhere. I have yet to strip a spurr. Not landing on throttle helps a lot.
I thought was great for the 5 minutes you get to drive it before the differentials go every time I run it I have to buy new diffs or pinion gear this car grinds like a hooker bro I’ve tried new internals and ready built diffs and all go within 10mins
I got this car recently. It rips. I destroyed the esc and motor in a couple battery cycles. I ordered all new internals for it. Just waiting so I can install everything
Diff dont last more than two good use days and are a lil hard to get from china , best thing to do is put some ticker diff oil when they are brand new. Mine melted the plastic fan inside the motor from running too long on grass , replaced it with Arrma 550 , metal gears , etc.
@10thscalegarage it makes me so happy to see that pretty much every comment I see has a reply from you. This shows you really care about your audience. Keep it up man! 👍
Thanks! Yeah, I love chatting about RCs. Haha. I feel like my channel has a crazy loyal following and we all kinda support each other. I’m proud of it.
so whats the solution for the diff getting clicky? That grinding noise.... is that something you have to replace parts on or do anything to... or it just goes away?
The first one i got lasted 2 batteries and motor burned out, the one i got now has lasted 2 months, only one bent driveshaft, but they are so soft i could bend it back by hand. Fun little backyard basher and really alot of car for the money 🙂
This drivetrain has been made into a hundred different cars...Helion Dominus, FS Maruader 53910 and several more. It is SOLID AS A ROCK !! With a brushless system they are bad ass !!
I have 1 and I beat the snot out of it and it just won't stop. My kids try to kill it and it just won't die , it's literally been driven off of a dock , submerged in 4 ft of water and it still works 100%.
Enjoyed the video. Thanks. A couple suggestions not mentioned so far... Fix the toe-out. I gave mine a slight bit of toe-in for better stability. Check the tightness of ALL the screws. Found a couple that needed snugging down. I did put a heat sink on my motor. They get HOT. Then enjoy one of, if not the best, values in RC cars!
You need 4 AA batteries for the transmitter, and yes, you can charge the LiPo via USB, but it will take forever. You can’t get a decent hobby grade charger for around $25. That will decrease the charge time by a huge margin.
If I have to put up that buggy to go up against another 1/14 4wd buggy, it would be the 1/14 Tacon Soar Buggy 4WD from NitroRcx. They both look very identical
The Tacon Soar is a rebranded LC Racing emb-1. The 144001 is a knock off of those cars. I had a 144001 for a few months. It was fun at first but then the rear diff went and then the arms and spindles kept breaking. Got tired of waiting forever for replacement parts so I eventually sold it. BTW lots of the LC Racing replacement parts fit the 144001. But I'd definitely buy an actual lc racing or tacon soar before I buy a other 144001.
You can upgrade battery life it's not a rc car that's just packed with room being filled with plastic it has great amount of space to work with to upgrade it
There are some pretty decent upgrade parts available for them too....metal diff and stuff like that...kind of like to see if it would be worth upgrading to brushless
Well, brushless is more expensive, that’s for sure. Brushless also doesn’t have as smooth of a power curve. They don’t have as much torque down low, either. A brushless motor would’ve put this thing in the next price category, losing a huge amount of customers. They could’ve put a 380 brushless motor in it, but then it wouldn’t be any faster than it is with a brushed motor.
Yea, my rear diff started clicking on the 3rd battery pack and gave up on the 5th pack. The front diff wore out a battery pack later. The whole diffs are pretty cheap though... You kinda have to have spare diffs from the get-go
@@10thScaleGarage with the rear diff locked, it's the monster of oversteer/donuts. You might find that the keyed diff-cups break after the next 5 or so battery packs. They eventually round off and then spin freely.
I have one but i ran into a car tire and my shock tower came off from the diff case so now my diff case is broken and my tower is bent so i order alot of spares. And the dhocks at the back need more oil.
Omg thanks to you I got the car about 4 months ago I forgot to tell you. Also the wltoys company is so good that am getting the wltoys 12824 with a 70% discount simply bc we bought this one with a 3 year plan omg this company is insanely good.
6 months in ..... After buying the second gen. axle stubs that are 2mm longer so the wheels stay on, I thought we’re good. Then.... bent or damaged parts; both shock towers, chassis (although just slightly), both front shock shafts, left front axle (dogbone end). Broken parts, rear wing, rear wing mount, left front a-arm, left front steering knuckle. One high speed cartwheel crash did all this damage, but 3 wheels did stay with the car. Compare that to a couple bent shock shafts on my oldest Slash 2WD that has done maybe a hundred cart wheels in 20-25 years. Chinese Junk.
Brushed and brushless can go in water, but the ESCs, receivers and servos are what you have to worry about. This car is not waterproof. Splashes are probably fine, but don’t run it through water intentionally.
Check out the new brushless version of this car here: th-cam.com/video/YompIS6sd2c/w-d-xo.html
This was my first hobby grade rc car. No regrets and seriously no complains! Only recommendation is to definitely use some thread locker on the nuts to keep the tires on as well as any other component that may come loose. Other than that, no issues.
And grease the diffs!
100% toy grade
is it pretty fast or a959b better overall?
@@louisabelhard9596 Its quite fast and enjoyable for a newbie. i think the a959b is harder to control though i have not owned it.
@@youronlycow ok thanks
I just bought one because TH-cam convinced me and I’m glad I did, as a starter R.C. it has blown me away!
Nice! Congrats!
@@10thScaleGarage Hey have you reviewed the DFR Blaze 1/10 drift rc kit? And if not, could you?
I started with a wltoys 12428 that i bought 2 years ago lol...
Im going to upgrade his diffs to metal this year btw
Waiting on one now can't wait to rip it up
@@brody1502 not yet bro!
I Love this little car! Swapped the motor and esc, receiver and steering servo. OMG! 3s velineon system and mini e revo steering servo with dumbo transmitter.
Holy bejesus. I bet that thing rips
@Brandon S I did. Two broken traxxas. rustler 3s and 4x4 slash now 6s, rustler is for drag races and slash for road bashing and track-ish racing.
I’ve had one of these since it came out, had mine before they became well known and popular, currently have £270 put into it on upgrade parts, maybe I went a bit over the top but it’s probably one of the nicest ones arouns
I have an RC Thad has way more in aftermarket parts than the original price. It happens. Haha.
10th Scale Garage yeah you don’t even realise when you buy a few parts but when you add it all up you realise how much you spent
@@AW-Luke let's see it I just subbed to you
That’s like putting $15,000 into a used Honda Civic.
@@soter305 the only thing used here is your last 300 brain cells.
Awesome little car. Mine also stripped a diff gear but after about a month of regular use. From the factory it doesn't have enough grease in the diffs so popping them open and adding grease before you start riding is a good idea.
It’s a must!
Can I just use any grease from autozone?
@@lucasburke6099 for the ring and pinion gear you can use regular grease. For inside the diff you get specific silicone based grease for RCs that you put in the diff that is dense enough to give you limited slip type performance. I use Team Associated 3000cst but this is up to personal preference
Great car!
Two things to be careful with:
1. The ESC goes into Low Volt Cutoff very low at about 6.3v.
2. The thermal cutoff does not seem to work. During hard grass bashing, I heard a "pop" and the ESC let it's smoke out. The plastic was melted and the heatsink was hot enough to fry a pork chop. The temp cutoff should have not let it get hot enough to melt.
Heavy grease the diffs 👍 mine was as dry as a nuns naff.
Yup. Mine was, too. They’re greased now!
Funny mine came mega greased but this car goes through diffs like it drains 2s 1500 mah batteries honestly every run I need a new diff or main gear
@@eggsoticsdragons5750 They all need the upgraded, Diffs & Spur & Pinion gear. Wltoys has on offer, especially if you going Brushless.
Mine has grease on both diffs!I put some more.
Whats a naff?😐
Already got one and another on the way. They are great upgraded to brushless
Pocket rockets for sure!
Do the batteries last longer than standard when upgraded? Cheers
Yes brushless runs longer and with more power
Darren Race - thank you, brushless upgrade it is!
Might be cool to see this with drift tires on it. Surprising all of the metal/aluminum it comes with! Great job guys!
That’s a great idea! Why didn’t I think of that?
Goes to show the amount of mark up losi and the likes make when 99% of the car is plastic and three times the cost of one of these. Transmitter is also infinitely more pleasant to look at than the offerings of losi team associated and traxxas. Not sure why but those companies are incapable of making a non ugly transmitter. They are highly offensive lol. HPI makes the most handsome transmitter imo tho.
Your editing kicks so much ass bro you’re gonna be one of the biggest R/C channels on TH-cam if you keep this up.
Wow! Thank you! That would be sweet!
10th Scale Garage You got the personality for it man I’m so glad youtube recommended me your vids!
Wynrotar thanks!
Wynrotar does not compute! Error! Error!
Average editing, average channel. Nothing special here, really.
Love mine just keep it off large gravel the stuff shreds the soft aluminum
We’re taking to a dirt track soon.
It’s name is Z06 Evolution, 144001 is the part number. Cheers
The whole internet is wrong!
@@10thScaleGarage For some reason, it has been the trend. Keep up the good work, awesome video 👍🏻
Just finished the all metal upgrade and installed brushless also. Speed test hit 45mph. Want to make it faster!!! Great starter hobby car.
Awesome! That’s bookin it for 14th scale.
Bought this on Amazon. Can't wait to have it delivered in the next few days.
Nice!! Congrats.
I got this for 99€ In my country when it went on discount, and my god it was the most worth it purchase I have ever done! This little thing has given me so much Joy :D
I ordered one of these off of Amazon over 4 months ago i was so hyped and it still hasn't arrived yet I keep getting excuses from seller I'm so pissed
That sucks. I hate it when that happens. We’ve all been there.
Great video guys, yep I've been hearing a lot about these too. So I just ordered two, one for me and one for my mate. Ha, race then bragging rights. Lol. Thanks for sharing. John
Nice! That sounds like fun
looks an upgraded version of the 959 the only problem I have had with mine is dirt getting into the spur gear via the open chassis slot underneath you may just need to clean off the motor and spur gear to get rid of the crunching a piece of tape to cover the slot will help keep dirt and sand out
Good idea!
Update: It arrived yesterday. I took it out to the park today and ran it on the concrete and the grass and this little car RIPS!!! Gosh I didn't know what I was getting. This thing is a blast. A buddy of mine and I do our park runs with my cars and we drive them around out there and my little WL144001 outruns my old Associated RC10. Not by much but it does. It is really impressive!
Who cares how good and cheap it is, when something breaks you have to wait several weeks for the parts, no hobby store in this country carries parts for these things...
Ha! You know, I used to think the same thing, but more and more hobby shops are starting to sell these things, and there are tons of Ebay sellers that buy them and part them out. Just something to consider.
@@10thScaleGarage sounds like sales talk
@@Professor-Scientist Sound like a lazy douch...I'll say it since he cant.
@@Professor-Scientist I don’t sell RC cars. The only ones I sell are to my friends so I can still drive them from time to time. I’ve given away lots of RCs though......
@@dustinlines2181 now now, we’re all friends here.
There is no discount code.
That WLtoys was so much fun
heck yeah it was!
@@10thScaleGarage is it normal that its very VERY hot?
There is a speed trim next to the third trim on the controller sometimes they don’t have the speed all the way up😊
I have four 144001 and I want more. Totally addict. Made more than 130 batteries runs and differentials are like brand new but greased before using and doing maintenance every 20/30 runs. Only things that are taking punishments are the tires but still alive.
Nice! That’s awesome!
Hi Guys, love all your rc car videos! I have heard that the wl toys 144001 comes from the factory with dry differentials, like many rc cars. I neglected to lube mine on a deerc 302e and when it started clicking it was too late. I lubed it and it locked up when I test drove it, thankfully it's only the rear one!!. I'm wondering if the noise you hears in yours is one of the diffs starting to go south. Just some friendly advise. Note, replacement diffs are availale for wl toys for about 15 - 20 bucks on amazon, but lube it when new, then it's no more worry and you save several bucks. Thanks and keep up the good videos!
That's actually a 550 brushed motor... Awesome litte big car. We been running one for a year, can't complain... Have 5T brushless system and new radio waiting but the thing hasn't broken yet. I've had to tighten turnbuckles for alignment. It's a favorite in our pack. We dismantled and lubed pre-use.
You’re right. Haha. I’d say a good 10% of the comments are people correcting me on that. My bad!
@@10thScaleGarage lol that thing is awesome, love your review!
Ive got an old system from a mini 8 build that will be perfect for this.
I’m assuming the mini 8 is brushless?
the brushless one is faster than the HYPERGO brushless 4x4 truck. I own both using 3S lipo 2200mah. I clocked the HYPERGO on my GNSS GPS ran 42mph on 3S. The WLTOYS have not gps yet but it will walk by the HYPERGO side by side!
Very cool! When the bring out this chassis as a truck I will go for it! Thanks for sharing!
Im already looking for truck bodies that will fit on it!
@@10thScaleGarage have you found one
@@10thScaleGarage have you found one?
bought one for myself, ad one for my brother. They are a blast! Jump really good!!
You’re the coolest brother!
@@10thScaleGarage It was the least I could do, as I got him back into rc's. It is a LOT more fun driving/flying with other people. (and laughing at their crashes ) haha..
Got 2... one stock... the other 6 cell... fpv..
Get metal gears and tighten the diff..by slightly curving the shim inside the diff... good lube too... HAMMER TIME.
I want to get into FPV
Why curve not just aff shimms?
That little bugger is awesome I ordered the 12 scale version but I may have to get this little thing and race it against my team associated 14/B.
Yes! I’d like to see that, too.
Yeah man great review, these things rip for very little cost. Got two last year, me and my son attach a Gopro hero7 to one, go to the park and have a great time racing and making movies. My kid is only 6 and can keep this RC moving with bumps, jumps and turns. The 144001 is a nice easy way to bash RCs. Take Care👍🏾👍🏾👍🏾
Nice! I’d like to get a few more for mini races
That would be cool to see a few of these on a track. This is the first time your channel popped up on my homepage, I subbed👍🏾👍🏾
My friend bought me this for my bday ( he lives across the country) and I had no idea what I was walking into since I've been out of the RC car game for aaaages. I had a RC10 B3 that had some slight upgrades, so some pre-assembled thing? Expected it to be just ok.
Uhh, this thing is better built, faster has 4W drive and I'm blown away.
My old car cost something like ...$150 just for the frame which didn't come assembled, I think it had the motor? But no servo or speed control, receiver, controller, etc. So it was another $70 for an electronic speed control and IDK how much for the servos since I think I just used one my brother had from the early 90s that he had in his King Cab.
So for $130 for something that's this fast and ...pretty damn durable? I'm blown away. My first crash with the old B3 destroyed the shocktower because- naturally they made it out of graphite for some bloody reason. My first crash with this car broke 1 of the arm joints that took 5 minutes to replace.
So what was the grinding? Might want to put that in your review, your basically saying it blew up after an hour of use 🤦🏻♂️
550 motor my only complaint with the car was the range. Great value for $90 I run my in drive way perfect for it!
yeah, we ran out of range once, but we were wayyyy out there.
Good buy for the price just need to look at the diffs and check nothing is going to come loose
Exactly
I have an a959, and a979. They are also branded strangely. One just says "headphones" across the side, and the other says "Pperformance".
I've seen those. Performance kinda makes sense, but.. Headphones?
@@10thScaleGarage it specifically says "Pperformance" I don't know if they forgot thr dash in there, or if they hit the P button twice lol.
Yea. Only prob I have with low budget rc’s like this is they have no slipper or center diff. So you can forget bashing. All that shock and sudden acceleration off the jumps go straight to the spur and strip it out and likely is a pain to access to remove. Like who really wants to drive a buggy or monster truck in the parking lot
Yeah. I haven’t driven it in a parking lot since. The thing is less than $150. You gotta save money somewhere. I have yet to strip a spurr. Not landing on throttle helps a lot.
such a cool laid back yet nice voice and speed, really cool channel
Thanks!
For running on tarmac and really exploring the handling they’re really good.
They look like they would last about 5 minutes bashing though!
This one took a pretty good thrashing for $100.
I thought was great for the 5 minutes you get to drive it before the differentials go every time I run it I have to buy new diffs or pinion gear this car grinds like a hooker bro I’ve tried new internals and ready built diffs and all go within 10mins
@@eggsoticsdragons5750 Is there anything under 150 bucks that won't fall apart on me?
They look like they would last about five minutes doing anything. After three battery packs the guy stripped out the differential. Garbage
I got this car recently. It rips. I destroyed the esc and motor in a couple battery cycles. I ordered all new internals for it. Just waiting so I can install everything
Oh no! Haha. We've put tons of batteries through ours. No issues other than the diff.
Diff dont last more than two good use days and are a lil hard to get from china , best thing to do is put some ticker diff oil when they are brand new. Mine melted the plastic fan inside the motor from running too long on grass , replaced it with Arrma 550 , metal gears , etc.
Yeah. We greased the diffs after the first three battery packs.
@10thscalegarage it makes me so happy to see that pretty much every comment I see has a reply from you. This shows you really care about your audience. Keep it up man! 👍
Thanks! Yeah, I love chatting about RCs. Haha. I feel like my channel has a crazy loyal following and we all kinda support each other. I’m proud of it.
I would have died if this one didn’t get a response but he did so it’s still wholesome
so whats the solution for the diff getting clicky? That grinding noise.... is that something you have to replace parts on or do anything to... or it just goes away?
The first one i got lasted 2 batteries and motor burned out, the one i got now has lasted 2 months, only one bent driveshaft, but they are so soft i could bend it back by hand. Fun little backyard basher and really alot of car for the money 🙂
I had a 12428 that did the same thing... I was bummed.
This drivetrain has been made into a hundred different cars...Helion Dominus, FS Maruader 53910 and several more. It is SOLID AS A ROCK !! With a brushless system they are bad ass !!
So I’ve seen!
I have 1 and I beat the snot out of it and it just won't stop. My kids try to kill it and it just won't die , it's literally been driven off of a dock , submerged in 4 ft of water and it still works 100%.
144001 is a steal for the price! :~)))
Agree!
I also own 2 of these. Can't beat it for the price.
I need a few more!
That looks exactly like my LC Racing EMB 01, though I never had problems with the diff on it. And I ran like 50 batteries through it.
Yeah, there are a ton of clones.
@@10thScaleGarage As Far as I know, LC Racing are the original designers.
Enjoyed the video. Thanks. A couple suggestions not mentioned so far... Fix the toe-out. I gave mine a slight bit of toe-in for better stability. Check the tightness of ALL the screws. Found a couple that needed snugging down. I did put a heat sink on my motor. They get HOT.
Then enjoy one of, if not the best, values in RC cars!
And grease the diffs!
@@10thScaleGarage True. (as mentioned below several times)
I packed Moly grease in the front & rear diffs before the first run.
Do you need batteries or can you charge it with usb or sum
You need 4 AA batteries for the transmitter, and yes, you can charge the LiPo via USB, but it will take forever. You can’t get a decent hobby grade charger for around $25. That will decrease the charge time by a huge margin.
I have an upgraded one that does 60 ish
Epic!
I just got mine but the throttle is reversed so as I pull the trigger the car reverses and as I push the trigger forwards the car goes fowards
Flip the wires on the motor around. You’re welcome.
I'm so hyped to try this little beast out i bought one from aliexpress for 84$ what a steal
Nice!!congrats dude.
I just ordered one but im gonna upgrade all the electronics in it when i get it...
5:35 "The pool jump of DOOM"
Pool at 7:16 : Am I a joke to you?
Haha. I’ll eventually jump the “big” pool.
@@10thScaleGarage XD looking forward to it, keep the videos coming!
If I have to put up that buggy to go up against another 1/14 4wd buggy, it would be the 1/14 Tacon Soar Buggy 4WD from NitroRcx. They both look very identical
Yeah! Super similar
The Tacon Soar is a rebranded LC Racing emb-1. The 144001 is a knock off of those cars. I had a 144001 for a few months. It was fun at first but then the rear diff went and then the arms and spindles kept breaking. Got tired of waiting forever for replacement parts so I eventually sold it. BTW lots of the LC Racing replacement parts fit the 144001. But I'd definitely buy an actual lc racing or tacon soar before I buy a other 144001.
I think everyone is buying it because it is fun as hell to drive. And it doesn't hurt that it is super cheap
Exactly
WHAT THE 2 S LIPO IN A CAR LESS THAN 100 DOLLARS
Just wanna ask.. If i play 144001 on sand.. Does sand goes in the motor and make trouble sound? How to fix?
Hi, i would like to ask you, does this car has thermal protection? Im really afraid of overheating.
Is this a good first car for a beginner like myself
HI, i bought two 144001 a few weeks ago. Already i have burned both motors running on short grass. Is this normal and what can i do?
Have we talked about a dual motor mount?
No, but I’m picking up what you’re putting down.
@@10thScaleGarage you'll see it soon. I can't remember who I was discussing it with.
You can upgrade battery life it's not a rc car that's just packed with room being filled with plastic it has great amount of space to work with to upgrade it
Agreed
YEAH this thing is so great i bought my second one in different color lol, I love them
I’m thinking about getting another one.
How much? Did you get it for
@@larrytorres2148 I think they were around $150 including shipping
@@9feetfrog in aliaexpress are for $70
@@sebasyara2901 I wouldn't shop with them!
Ever figure out the clicking? Cool video.
How long did it take to arrive for you?
There are some pretty decent upgrade parts available for them too....metal diff and stuff like that...kind of like to see if it would be worth upgrading to brushless
I’ve got something epic coming for it….
you would think they would also offer a brushless version of this???
It’s pretty fast for a brushed!
@@10thScaleGarage i know but brushless is better... not all about spend... i have like 30 rc planes over last 10years and everything is brushless...
Well, brushless is more expensive, that’s for sure. Brushless also doesn’t have as smooth of a power curve. They don’t have as much torque down low, either. A brushless motor would’ve put this thing in the next price category, losing a huge amount of customers. They could’ve put a 380 brushless motor in it, but then it wouldn’t be any faster than it is with a brushed motor.
Hi. Incase a part breaks, like maybe shocks or whatever, are there spare parts that fits and compatible in the market? And are they easy to get?
Yup!
I just bought one today, can’t believe theres an entire community to this little buggy
It’s massive!
ive done 2 rear diffs in mine. greasing the next one. But man it takes a bashing jumps rolls it just takes it.
They sell upgrades diffs.
Yea, my rear diff started clicking on the 3rd battery pack and gave up on the 5th pack. The front diff wore out a battery pack later. The whole diffs are pretty cheap though... You kinda have to have spare diffs from the get-go
The spider gear inside the diff let go. We locked the rear diff, greased the front diff and it rips harder than ever.
@@10thScaleGarage with the rear diff locked, it's the monster of oversteer/donuts. You might find that the keyed diff-cups break after the next 5 or so battery packs. They eventually round off and then spin freely.
Try putting some shims in your diff. I used to have the same issue with a different vehicle and that changed it.
I might have to pick one up and do a brushless conversion and a drive train upgrade and see if it does well against my 1/14th tacon soar and bulwark
There are people that get 70+mph out of them after brushless swapping them.
@@10thScaleGarage jeez 70 mph.. I'm gonna have to build an all steel front end 😂
Sounds like a sweet video!!
I have one but i ran into a car tire and my shock tower came off from the diff case so now my diff case is broken and my tower is bent so i order alot of spares. And the dhocks at the back need more oil.
Yeah. The diffs do t ha e any grease either.
@@10thScaleGarage yeah they grind after awhile so i greased befor use and they haven't started grinding after like 15 runs!
These are great for the price...i bought four. One for standard, others for Mods..
That’s the way to do it!
@@10thScaleGarage 👍🏽
Will the tires of of the wltoys a979-b truck work with the buggy
I believe they will.
Would it be worth buying this car or a brushless for my bandit and upgrade it to being a 60/70mph+ build?
Thats up to you!
did you figure out what that mode button does?
Yup. It does nothing.
Wow, i would love to get the Electronic Speed Shinanigan buggy!
Do it!
Can I know the type of battery connector used in this car? Can you recommend a battery for longer running time.
Deans connectors. The stock battery tray is pretty small, so I’d recommend just getting a few more 1500 mah 2S lipos.
Destroyed my rear diff in weeks. Got new gears and greased. Lasting very long niw
Yeah. Mine had zero grease. Fixed that issue after this video.
Same here. Mine had grease in it but still wore out in the first few days
I followed the link in the description but it says 118 dlls.... has the price been raised since this video was made?
Yes. I think BECAUSE of this video, sadly.
I can’t figure out their website or the app. Says I get $20 off as new user but I don’t see a way to order this for less than $100.
Yeah. The ordering experience leaves something to be desired. Its hard to find these for less than $100 nowadays.
@@10thScaleGarage I found it on eBay for $70. It says it has a metal diff and is brushless ready, is that new? I wonder if they fixed the diff issues.
Omg thanks to you I got the car about 4 months ago I forgot to tell you. Also the wltoys company is so good that am getting the wltoys 12824 with a 70% discount simply bc we bought this one with a 3 year plan omg this company is insanely good.
Right on! I’m glad you’re digging it!
I know its been a year now, how's the RC? Still running good?
Yup! We run it quite a bit. Had to replace the drive shaft a few months ago but it was super easy.
xlf f16 is the one to get now clone of the 144001 but with more aluminum parts about the same price too
Yeah. I see a bunch of people getting them.
I got a X-Max I might get this for some fun back yard bashing, You need a open field for the X
For real. I have the outcast 8S and you need a biiigg empty space for it.
Can you use it in talll grass without burning motor?
Yup!
@@10thScaleGarage any advice for a rc big tires fast 40mph and less than $80 and not from banggood china but maybe from amazon prime?
6 months in ..... After buying the second gen. axle stubs that are 2mm longer so the wheels stay on, I thought we’re good. Then.... bent or damaged parts; both shock towers, chassis (although just slightly), both front shock shafts, left front axle (dogbone end). Broken parts, rear wing, rear wing mount, left front a-arm, left front steering knuckle. One high speed cartwheel crash did all this damage, but 3 wheels did stay with the car. Compare that to a couple bent shock shafts on my oldest Slash 2WD that has done maybe a hundred cart wheels in 20-25 years. Chinese Junk.
This one has been pretty solid so far!
I got one it is coming on the 16 so exited I will update wen it comes and I got a lipo battery and an upgraded motor
Awesome! Congrats dude.
I just bought one. It is arriving tomorrow
Can I use this car’s Battery ( 1500 mah 7.4 v ) in my WLTOYS 12428 ?? Plz reply 🙏
Yes.
ZOP Power 2200mah, 35C , is a perfect fit battery upgrade .
I’ve got some florion batteries that are 35c
Does anyone know how compatible its parts are to those of the Losi Mini 8ight??
Not at all. Two totally different vehicles.
you should get a hosim 9125, its a great car for the price and amazing quality
Send the link
@@10thScaleGarage www.amazon.ca/Hosim-Large-Size-Control-Controlled/dp/B07867TVGB
@@10thScaleGarage unfortunately, the item is out of stock right now and it is unclear wether it will be restocked :(
The_Great_Yeeter bummer
@@10thScaleGarage wait i found a link
www.amazon.ca/Hosim-Large-Size-Controlled-Cross-Country/dp/B07C9C915V
Does brushed mean able to go in water or is that brushless
Brushed and brushless can go in water, but the ESCs, receivers and servos are what you have to worry about. This car is not waterproof. Splashes are probably fine, but don’t run it through water intentionally.
Thx