@@Ebthoes I got all the parts in the mail not to long ago, forged pistons, rods, etc... Whole little rebuild and upgrade going on. Haven't had much time to mess in the garage lately. It's looking more like a early spring project for me now with all the snow I got butchered with
siiik, i grabbed last summer an engine for this summer, it's replacing a 4g14 soch upping it to 3 valve sohc 4g15, so now if i'm lucky i can go up to 4 valves Dohc with the same block?! thanks for the can of worms I'm inevitably about to open!! :-} Stoked I know allot of the post 99 engine bays are the opposite side up here in da north, so the fact that this is a thing makes me stoked I can keep my old 82 spinning!
4G92 already come with 4 valve sohc.. this will add too little power at high rpm range,..but it will be mantainance free since its use hydraulic tappet..
the old type was 100% better , mitsubishi are known for shit ticky lifters aka mitzy tick like all dohc and later sohc mitzy engines, the old manual tappets, you get them perfect once and you don't need to go back unless you fukd up and they need adjusting i had a 1988 mitzy L300 4x4 4G63 sohc 2 valve per cylinder and that was the first of the hydraulic lifters, it ticket like a bastard randomly , so does my 1999 mitzy mirage dingo all my older cars(before 1985) have manual tappets and have been set and run really mint one thing he forgot to do is add a oil restrictor, sohc engines need more oil to the heads, where a dohc heads use less oil and therefore need an oil restrictor
@@genmaxpain hello, nice tuto.. i have space wagon 1993. 4g63 sohc 16 valves. 133 hp. it is hydraulic lifters with big tick.. maybe i can clean my lifters ? i don’t want to change it all, it’s expensive. When re-installing hydraulic lifters, it have to be purging, pumping smooth ? or hard ? best vibes, mitsu lover
@@DIY_WorX hey boss, to be clear , im doing the same thing to my Proton wira.. converting 4G93 sohc to Dohc.. is it possible to fit 4G91 just like u did, but use 4G93 sohc engine mounts? As i know u have mentioned earlier its a tip to use 4G91 mounts.. distributor need to reuse the 4G91.. And how about the timing belts? Just buy Dohc 4G9x ? Is it the same timing mark for 91 dohc and 93 dohc ?
the cylinder head in this video is off a 4g93p which came out it proton satria gti's and the 4g93t the turbo on came out in the 1993 gsr i have just 2 of the 4g93p engines chilling in my garage.
Probably just steam, I washed the headers before installing them and once they got hot they evaporated! It went away after another few minutes of running the engine :)
Excellent work my friend!
I am doing the SOHC 4G94 swap to 4G93 DOHC also
Great video. Glad it worked man!
How is it going?
@@Ebthoes
I got all the parts in the mail not to long ago, forged pistons, rods, etc... Whole little rebuild and upgrade going on.
Haven't had much time to mess in the garage lately. It's looking more like a early spring project for me now with all the snow I got butchered with
@@ItsRabb good luck!! I have a 2005 lancer es and I got another 4g94 and have only the 4g93 dogs heads so far. I hope your build goes smooth!!
looks like a diesel
I'll try to convert a Motoricicle SOHC to DOHC, Thanks Brother, YOu are a Master
Very nice work, very helpful!
I would like to do this with a 4g63 in my GFs galant would that be a similar proces since I feel like you'd might have to change out ecu as well
did you do it? im trying to get info to do it in my 92 galant gls
so can this be done on a 4g94 or does it have to be a 4g93?
siiik, i grabbed last summer an engine for this summer, it's replacing a 4g14 soch upping it to 3 valve sohc 4g15, so now if i'm lucky i can go up to 4 valves Dohc with the same block?! thanks for the can of worms I'm inevitably about to open!! :-} Stoked I know allot of the post 99 engine bays are the opposite side up here in da north, so the fact that this is a thing makes me stoked I can keep my old 82 spinning!
Well done! Now try to convert 4g15 sohc to dohc mx 😍
Xblh bos kod 4g15series x same model dgn 4g9x series....nk kacuk kne same kod blh cari sama model 9x series jgk
@@diyfix6053 aku tgk dkt youtube ada yang 4g15 dohc tu pelik
Mne dtg tuan std kilang 4g1x pangkal memg single bos...lw 4g9x memg dohc
Haha aku pun pening ada 4g15 terbalik xtau code apa
@@diyfix6053 bang nak tanya kalau block 4g63 sohc, tapi head dia 4g93 dohc masuk tak?
Nice work man i want to do the same with my honda fit but i don't now if there is any head available
isn't there also a factory turbo for the 4g93 DOHC? I have a 2001 Mirage (Lancer) with SOHC, I would love to DOHC and Turbo convert it.
4G92 already come with 4 valve sohc.. this will add too little power at high rpm range,..but it will be mantainance free since its use hydraulic tappet..
the old type was 100% better , mitsubishi are known for shit ticky lifters aka mitzy tick like all dohc and later sohc mitzy engines, the old manual tappets, you get them perfect once and you don't need to go back unless you fukd up and they need adjusting
i had a 1988 mitzy L300 4x4 4G63 sohc 2 valve per cylinder and that was the first of the hydraulic lifters, it ticket like a bastard randomly , so does my 1999 mitzy mirage dingo
all my older cars(before 1985) have manual tappets and have been set and run really mint
one thing he forgot to do is add a oil restrictor, sohc engines need more oil to the heads, where a dohc heads use less oil and therefore need an oil restrictor
@@genmaxpain hello, nice tuto.. i have space wagon 1993. 4g63 sohc 16 valves. 133 hp. it is hydraulic lifters with big tick.. maybe i can clean my lifters ? i don’t want to change it all, it’s expensive. When re-installing hydraulic lifters, it have to be purging, pumping smooth ? or hard ? best vibes, mitsu lover
Sir 4g63 po ba yung cylinder head??
Hey good day do you still have the manual book you used to install it
Hi sir.. please teach me how to change or install a timing belt.. 🙏
The guide book you were going by where did you find it?
I would like to find one for a 4g64 dohc swap?
What other head can work in 4g64 bottom half?
That engine is expo 4g64 an head what is that doch head for that swap
Nice work! Is there a change in horsepower/torque output and speed?
Follow
Hi bro. I also have pajero io 2000 with 1.6 4g18 but is very slow any tip which engine I can swap with same gear box.
I was wondering if you had to use the dohc computer or wiring harness?
No, everything works the same
you win another subscriber!!! part 3 please
Ang galing sir! kudos! tanong lang san makakabili ng 4g91 dohc head?
Search lang kayo sa fb marketplace minsan meron
Will this work on the 97 eclipse spyder Gs 2.4l ???
hello . any insight po. 4g92 sohc to dohc , is it plug and play also ? like 4g93 ?
thanks in advance for the reply, and how much it will cost?
Hey great video, where did you find the manual for this?
4g93 sohc , is it possible to install the 4g92 mivec head?
does anyone know where can I find that manual? or it’s name
Its inspire me to swap my 4g92
what intake do you use thats from sohc head? it will fit to the dohc head?
hello did you use intake manifold and water pump from the old engine?
How about a 4d56 engine
Would a 4g63 head fit up on a 4g93 block?
Planning to convert my 4g15 (carb) to 4g15 DOHC. normally boss, how much would it cost?
Thanks for the response.
Mitsubishi montero sport dohc possible?
Idol talaga paps Bernie!
Si Paps Bernie president ng LICP?
boss, mas tumipid o lumakas po sa gas?
aby advantages or disadvantages?
Hi sir.. where ur location.. it can do also in honda..?
nagpalit ka pa ba ng armtensioner?
What distributor you use bro??
Hello
What timing belt should I use for 4g92 Block + 4g93dohc head (non mivec) ???
Can you help me???
4g91 153yu29
Need to change the ecu to?
What is the engine donor?
How about distributor? It suitable sohc to dohc?
Do you need to change the ecu also??
is the sohc distributor pnp on dohc head or need to mod something to make it fit?
Just use the original dohc distributor
@@DIY_WorX is it 4g91 or 4g93?,by the look of the piston it's not 4g92 coz 4g92 sohc have a high comp piston
@@amadzack666 its 4g93 stock pistons. But distributor came from 4g91
@@DIY_WorX hey boss, to be clear , im doing the same thing to my Proton wira.. converting 4G93 sohc to Dohc.. is it possible to fit 4G91 just like u did, but use 4G93 sohc engine mounts? As i know u have mentioned earlier its a tip to use 4G91 mounts.. distributor need to reuse the 4G91..
And how about the timing belts? Just buy Dohc 4G9x ? Is it the same timing mark for 91 dohc and 93 dohc ?
I also would like to know I want to swap mine
And how much power does it have now compared from sohc stock
No idea. Havent got it dynoed
Did you exchange the car computer?
On an old reply he said it was the stock ecu
Possible po ba if 63sohc(carb) sirius 80 1.8 to 63dohc head rvr (efi) conversion?
Please respond. I am working on the same project
Hm did it cost to swap all that?
can i ask sometihing...what timing belt did u use ..? is it 4g63 timing belt..?
MD176389 - BELT,VALVE TIMING (1pc) for 4G93 block (156 teeth)
What timing belt did you use?
Bos kalau 4G92 nk convert head twim cam boleh jugak ke?
boleh je. tapak braket engine kat pulley timing belt tu guna 4g91 punye
@@imanfirdaus6496 distributor leh pakai yg 4g92 x
you went from a permanent sealing head gasket and sprayed it with garbage in a can??!!!?!? wtf why do that to a special silicon permanent surface??
Wiring sohc atau dohc..? Kalau sohc, distributor mcm mana..?
Sir magkano aabutin kapag nagpa DOHC ako pati labor na at head?
Mgkno mag pa convert sohc to dohc bosing
May I ask, from what engine did that dohc head came from?
4g93 dohc gsr
Sir pwede po ba sa 4g63 sohc to 4g63 dohc head?
hey man. this inspired me to do my j35 . let me know if interested.
Sir how much coast
How about 4g92 block and 4g91 dohc head?
It should also work
@@DIY_WorX how much HP added?
Galeng paps solid
Saan po shop niyo?
sohc convet dohc tapi susah nak start
Sir magwowork ba if Lancer itlog na 4g92 engine icoconvert
Pede
May nagawa na kaya to sa civic? D series to b series head
Same question 😅
why are Mitsubishi parts so hard to find ?
the cylinder head in this video is off a 4g93p which came out it proton satria gti's and the 4g93t the turbo on came out in the 1993 gsr i have just 2 of the 4g93p engines chilling in my garage.
Pwede rin bng gawin dohc ang 4g92a ng pizza? At anong head?
I want to convert mau 4g15 soch to doch 4g15 so badly
Do i need a different manufold?
Because i have headers on my 4g93sohc
no
Loc nyonsir..pacheck ko unit ko pwede 😊
Pwede po ba lxi ph15 to dohc?
Anong head yan? 4g91?
Umusok sir. Hehehe. Nice job. #diyneverstops
What engine does the dohc cylinder head come from?
4g91
Assalamualaikum bang nk tnya skit brapa kos ya
sir d nb need paltan mga injector mismo doch head lng need? salamat
Hindi ko na pinalitan injectors
Sir question ano po timing belt gamit nyo planning dn gawin q na eh 4g93 soch to doch ano po kaya pd tining belt salamat
@@jhaymgaming4476 MD176389 - BELT,VALVE TIMING (1pc) for 4G93 block (156 teeth)
Magkano po boss aabutin convertion ng ganito?
I have to ask what was all the smoking at the end?
Probably just steam, I washed the headers before installing them and once they got hot they evaporated! It went away after another few minutes of running the engine :)
Sakit sa ulo yang rvr mo right hand drive pa ata. Ano Yung head na ginamit?
mga sir saan kayo nakakabili ng 4g93 dohc hehe
Sir, may facebook ka ba? I have questions kc about 4g63. Thanks!
Is it possible to convert g16b suzuki baleno 1.6 sohc to convert into dohc
If possible what are all the things to change or have alter according to fit dohc
Can you please send me your Instagram id
kos berapa bang dan pakai head apa ?
Stanby dalam seribu lebih sikit ja..head 4g91
hindi na po ba need magpalit ng computer box dyan sir
Hindi na. Stock 4g93 ecu
Thes a part Mising
Pinas to
Can anyone tell me what is needed to do a 4g93 sohc carb to 4g93 dohc carb? Saw it in this video th-cam.com/video/NRrxJ2TJtss/w-d-xo.html
Paps, ano po Facebook nyo po.. Thanks!
Saan po shop niyo?