NOTE: If you have a 2006 Camry- do not follow this video. There are bolts and nuts that MUST be removed by accessing the sheet metal under the trunk upholstery along the wheel well AND in the rear corners near the tail lights. I followed this vid and broke the first side of the bumper (pulling on it like he does) before I realized I screwed up. I would have done my own video, but I couldn't have passed TH-cam's anti-profanity regs.
Wow this is an excellent video! I just bought a used 2009 sedan LE and got some scratches on the bumper. When I find a replacement I will refer to this video to DIY.
+WorldPeace1 Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Hey sir, this was very helpful. I would kindly appreciate what the size the screws were you removed and and you mentioned in the back bottom how they used like a zip tye what is normally suppose to there? Thanks. I have a Toyota Camry and i really think bumper is fine just missing the screws to tighten the back.
+Rajdeep Gill Thanks for watching! We do not currently have the size of the screws in this vehicle. You should be able to contact your dealer with the VIN number and they can provide that information.
+Kevin Powers We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application.
My 2006 Toyota Camry has 4 bolts holding the bumper to the trunk of the car so you gotta get in their and remove the cover first and than proceed to remove those bolts. The bolts are clipped onto the bumper
What if you can't get the bumper to snap in precisely because it won't snap in?due to age and it won't snap in tight, looks crook it sticking out in certain areas.
I just bought one from ebay today that comes painted.. It was the highest quality one I could find (also the most expensive at 460 bucks plus tax), still a heck of a lot cheaper than the body shops around here wanted. I'll let you know how good the quality is.
Just in case you're wondering the quality was great. The paint was perfect match to the body and I saved about 500 bucks from the cheapest estimate to fix it from the body shops around here.
Hey...wait a minute! You sell parts for this, but used zip ties? Just sorta kidding. The bumper on .y daughters camry is loose at the right rear quarter panel and I was watching this to see if the clips are available. :)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Do you guys sell the black bracket that goes on the tail light to hang the rear bumper
it's a pleasure to watch someone work who knows what they're doing, great job!
+Walkin’ Man Thank you!
NOTE: If you have a 2006 Camry- do not follow this video. There are bolts and nuts that MUST be removed by accessing the sheet metal under the trunk upholstery along the wheel well AND in the rear corners near the tail lights. I followed this vid and broke the first side of the bumper (pulling on it like he does) before I realized I screwed up. I would have done my own video, but I couldn't have passed TH-cam's anti-profanity regs.
I like this video / presentation !! It's straightforward to the points.
THank you
My dad just got backed into this weekend, totally needed this video! thanks!
+evoltzt Thanks for watching. We are glad to hear that this has helped you out. 1aauto.com
If he was backed into, wouldn't he need the front bumper video ? :P
Clear video and voice. Concise, perfectly organized. A tremendous help.
The mechanics used zip tie at my moms car, in the two holes located at the lower rear bumper. Thank you so much for the video, its a big help.
Wow this is an excellent video! I just bought a used 2009 sedan LE and got some scratches on the bumper. When I find a replacement I will refer to this video to DIY.
+WorldPeace1 Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
Great video just fixed my bumper.
Thanks for the video.
great video! great lighting, good angles. Excellent job. Competent tech. Thank you very much.
Beautiful, well-organized video. Thanks!
Same method for 2011 Altima? Thanks for the great informative video!
Awesome video, really easy to work on bumper! Thx :)
Can't believe it was so easy to remove, thks
+Jeff Martin Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Excellent video, thank you!
+Carl Kottmeier Thanks for checking us out!
Thanks very useful. Even though I'm in Australia all the best with your business.
+Japes Aus Thank you for your feedback!
Super helpful thanks
1 million thanks!
Nice work and great video
I love you show me how replace bumper thanks
Hey sir, this was very helpful. I would kindly appreciate what the size the screws were you removed and and you mentioned in the back bottom how they used like a zip tye what is normally suppose to there? Thanks. I have a Toyota Camry and i really think bumper is fine just missing the screws to tighten the back.
+Rajdeep Gill Thanks for watching! We do not currently have the size of the screws in this vehicle. You should be able to contact your dealer with the VIN number and they can provide that information.
Nice, thanks a lot!
Thanh you for you guidance. It's spot on
+Five Mountains Thanks for checking us out! 1AAuto.com
will the clips break or the bumper slots if so what then
Very helpful.
+Kenneth Iman Thanks for checking us out! 1AAuto.com
Where do you buy the little black plastic cusps housed in the corner of the bumper?
Does this method work for a 2006 Toyota Camry?
+Kevin Powers We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application.
My 2006 Toyota Camry has 4 bolts holding the bumper to the trunk of the car so you gotta get in their and remove the cover first and than proceed to remove those bolts. The bolts are clipped onto the bumper
I don't need a masked Tape, it's really no problem if one don't use a masked Tape. But the Video is good!!!
The screws are freespinning and I can' t get them out. What do i do
What if you can't get the bumper to snap in precisely because it won't snap in?due to age and it won't snap in tight, looks crook it sticking out in certain areas.
Followed the link below - the product shown (rear bumper cover) is no longer offered. Sad face.
Do you guys sell painted bumpers? I need the exact one in this video
Hello, We do not sell the part in this video. Thanks for checking us out! +WineCountryMaintenance WineCountryMaintenance
I just bought one from ebay today that comes painted.. It was the highest quality one I could find (also the most expensive at 460 bucks plus tax), still a heck of a lot cheaper than the body shops around here wanted. I'll let you know how good the quality is.
Just in case you're wondering the quality was great. The paint was perfect match to the body and I saved about 500 bucks from the cheapest estimate to fix it from the body shops around here.
Why did you put the masking tape?
Look simple remove the 4 bolts.
Hey...wait a minute! You sell parts for this, but used zip ties? Just sorta kidding. The bumper on .y daughters camry is loose at the right rear quarter panel and I was watching this to see if the clips are available. :)
gahahaha it just popping....loud pop....checks if its not broken haha
Metro 2009 5:16 5:21 5:26