@@throwawaypt2throwawaypt2-xp8nx Clearly she did... the choices were "yes" and "absolutely". She picked "yes" even though she mispronounced it a little. I see no problem here.
Listening to tones below audible frequency rattle everything in the the shed, goes outside "Almost no noise which is cool"...... Meanwhile the old guy 3 doors down with the giant glass window pulsing at 16hz "THE BOMBERS ARE COMING THE BOMBERS ARE COMING!"
I live in UK for about 8 years and i've had to deal with lots of people - good and bad; but you,bruv are a different and rare species and i love that about you! Genuine, nice, kind and funny! LOVE what you do and LOVE your attitude! God bless!
@@PacmanBasshead *I IMAGINE YOU AND YOUR WIFE VOMITING ON EACH OTHER WHILE LISTENING TO "ENDLESS LOVE" BY LIONEL RICHIE AND DIANA ROSS!!* --- ROSEANNE BARR
Me and my family can’t thank you enough for your kind words and for sharing the donation link. Amazing message from you, Dad (Wayne) will be so overwhelmed when he knows the kind things everyone has done! Thankyou again
recently lost my grandma to a very similar situation, so it is hitting closer to home than it should. You'll find my donation in the list. Keep up the good work on the channel and congrats for 10k subs. Greetings from Italy
Just watched the end of the video. You've earned a subscriber, and my respect for your words and selflessness. Sharing your friends story and asking the community for help, you could see a glow in your face immediately. Can tell you're a genuine good person.
Never seen your channel before, congrats on the 10k! I appreciate the wise words. It's worth noting, the big attribute of the IB alignment isn't group delay, ... it's the extraordinary sensitivity increase that accompanies the acoustically large back-space. The driver not needing to work against the air spring of a typical backspace, be it sealed, vented, whatever ... that's what elicits the coveted attributes of the IB. Sensitivity I've built/used multiple alignment platforms. I built a quad 18" attic manifold IB for my primary system. It's not without its drawbacks ... each approach possess unique pros and cons. Everything in loudspeaker design, especially subwoofer design, involves tradeoffs. Solid content, much appreciated. Cant wait to check out the other work!
This was so funny and awesome! I've not had any personal experiences with infinite baffle in a vehicle but if it does not play Bass outside, then it's a no from me. I've seen a vehicle with subwoofers on the roof as the infinite baffle setup (they cut a hole in the roof for it to actually work lol). I personally not gonna do that considering having the subs exposed to rain and elements but was very interesting for sure.
One of my early builds was 4 8” subs in an infinite baffle set up on the rear deck of my large pontiac coupe. Wired into one channel the sound was amazing to my young ears and the sight of four drivers moving in unison was impressive at the time. As you noted , a downside to the set up was unchecked cone travel so the subs lasted about 6 months before the suspension got too loose and they had to replaced. I went through three sets of subs before I changed setups. Donation made for your friend’s family, best wishes for his recovery.
Gotta get a sub more suited for IB. High Qts is one of the metrics you should look for. Or check for my other comment that'll lead you to a video where a guy explains it in depth. Of course, if you just want a sub recommendation, Fi IB315 is the ticket. In a sedan you can do two of them in a trunk baffle, and as long as you have a decently strong roll-off in your tuning below 20hz, you can run each one on 700w RMS (rated 600) and they won't stroke out like your worried about. They don't even go above Xmax (which is not the same as the full mechanical limit) until 20hz on 700w, and that's true IB, not a 4x VAS or 10x VAS trunk baffle setup. At 600w rated RMS they don't hit Xmax until 10-15hz IIRC, so there's plenty of room to play with. Even more so if you set your lowest desired frequency higher (IE 25-30hz for the start of the roll-off) and/or have a particularly strong infrasonic roll-off like -18dB/octave or more.
key word being FOR (not WITH which is how i read the title) LOL i bought a house needing a shit ton of reno last year that so happens to have the living room right above the garage. during the process i installed two 15's (Dayton Audio DCS380-4) hidden in the floor upfiring through air conditioning vents, backfiring into the garage. some of the best sounding bass i've heard for sure - smooth with no peaks/dips, 'fast', quite deep and the biggest benefit is that you can hardly hear it from the outside since what little escapes from the front and back wave basically cancels out. oh yeah, and nobody knows where the subs are lol
Gosh darnit, I love TH-cam so freaking much! Just a man, a shed, a phone and a brain that is thinking of stuff that for some reason, men's brains do... Why is that BTW? Why do we dig us down in holes just because the earth is filled with numbers and stuff? I know the reason... in the end it gives us a reason to buy STUFF, and we need something to do. Each weekend needs to be filled with work. Work that we want to do! :) GJ, keep it going! :)
It's not just that. Weekends are the time we get to work on what we want to work on. Unless, like me, you have a pile of crap to clean up from when you took a week off to install enuf to get the car playing to my standards.
All matter has two properties in a man's brain. It can either be repaired or improved. If it's broken, fix it. If it's not broken, make it louder/faster/hotter/cheaper/flatter/stronger/easier. Should your matter break during the improvement process, simply repeat.
I played a bit with speakers myself, and one thing i found easy to do trying to lower the frequency of a speaker was add a bit of weight to the cone, right on top of the coil so it will slow down the movement of the membrane. Another thing that helps is adding another magnet on top of the existing one. It may sound crazy, but trust me you can turn a bass into a sub if you do both. Hope to get you to at least a few million subs you are hilarious cheers.
Congratulations you mad bugger! May you quickly make it to 100,000 and put a subbie in the wall of the house! And you will be able to rebuild your now crumbling garage! You are the best my man! Please keep it up!
Love the amazing and creative videos! Everyone loves to see the channel grow, but as it grows make sure you keep spending time with your family because that is one of the most important things to anyone. Hope you can find a great balance and grow the channel to its full potential.
Wow! This channel is getting more and more amazing! While group delay is a thing as long as it's flat it's curver is flat it can be corrected with delaying the other speakers. Even if not flat with a more advanced DSP it can be flattened. A 15 in essentially a sealed box doing that is crazy! And my god i had that same reaction when i first played something seriously DEEP on my 8inch Tapped Horn that's tuned to 15hz. It's louder than the Ported 15 that was also tuned to 15hz that i had before which is absolutely wicked! I will absolutely help out buddy out a bit! Bass homies gotta take care of each other!
ah infinite baffle, my old friend. Having experienced it in a car and a house thus far i can honestly say it's a truly awesome thing. i hope your partner goes easy on you, better line up another window asap lol
I've done this in two different cars over the years, the effect is startling, even with a cheap 30 dollar Jensen woofer. Just had to be careful with power. I always recommend it, nearly built one for my living room. but SVS made for a cheaper alternative with similar results. Also the "no noise outside" was an effect we noticed for both cars. Keeps the bass in where you need it.
Can I just say I love your work mate, am a DIY sound enthusiast @ heart & honestly it's a breath of fresh air to stumble across one of your shorts while doom scrolling. Greatings here from NZ, UP Da Wahs!
To update.....the garage now has a new window. No more breaking windows though!!! Maybe the garage door next so i can use that as an excuse to replace it. People please get behind me to persuade him that we need a new garage door!!! Please and thanks 🙏😂 give him ideas on how to break that...
Man, that means so much! Its all about feeling alive and being great to everyone. The worlds a scary place and if i can make people smile for 15 minutes, twice a month, then I'm doing my bit.
A rotary subwoofer can also play those frequencies, but even wayyy louder! A disadvantage is that it can only go up to about 30-40 hz though depending on the design. It also uses an infinite baffle.
i really like the way you present what you do and the things you do! thats why i immediately followed your channel. i think your children are lucky with a basshead as a father! i wish you luck making more content!😁
I've been running IB in my car for a couple years. You dont get much above 60hz reponse to the front. So you need a front sub like a 10" in sealed to do 60hz and above. You wont every feel anything like IB from an box. Plus you only need a few hundred watts.
@@PacmanBasshead Its ok , make some metal baffle rings for support on top and bottom for reinforcement and as long as its not structural such as the spare tire well it wont hurt anything.
Infinite volume sealed box for the win. Open WinISD and model that. It's basically what is happening here. Then model the same woofer in a 3 cubic foot sealed box and apply the Linkwitz filter to boost the bass response down to the free air resonance of the woofer. You will have the exact same response. The same maximum SPL. It takes very little power to move the woofer at low frequencies. The woofer output is limited by its Xmax at low frequencies.
Loved this channel since the day I saw it on your Temu subwoofer video. Can't wait to see this channel get the subs it deserves and see what you have planned for future videos!
really like the idea and the shaking lamps lol The dumbest thing i found out is that you can use a midrange from a Teufel M550 FCR select as a subwoofer that goes down to below 50 hz
Considder making a manifold with 2 drivers wired in phase, but mechanically opposed. Or if you want to cancel out 2nd order harmonics mount 1 normal 1 inverted and wire 1 driver out of phase so the woofers move mechanically oposing in a push push configuration.
I think before I would modify the gas tank location, I might actually try this with my 97 civic, needs welding and other kind of engineering, but would be fun to try before fiberglassing stuff
I have experimented as a younger teen we used to call those kind of speakers free air subs as they didnt need a box to run. Hatchback cars of the 70s and 80s were great as you could make a board to cover the hatch area and put some cheap speakers in it for a kid on a small budget this worked very well. Also pvc pipe works I would cut a small section about the same length as the speakers was wide and just leave the back side of the tube open.
Infinite baffle and offset transmission lines are my favorite. When paired with a nice amplifier, the drums sound more realistic and have a tight snap that will make your eyes blink.
@@cajampa Exactly what he shows in this video. He didn't mount the driver near the start of the line. It was mounted around 1/3rd from the starting point. Doing so helps reduce the midrange ripple. You can test this yourself by measuring the impedance curve and comparing the results.
@@svojon Thanks, but wow. I have no idea what you are talking about man. Sorry to tell you. I am not well versed in building subs and I can not parse what you are telling me. Are you talking about the mounting position somehow....was is the line and what is the starting point?
@@cajampa I'll try to keep it simple. Think of a TL as a simple straight pipe. The starting area is the side of the pipe that's sealed off. The ending area is the opposite side that's open. Normally the speaker is mounted near the starting area. The offset design has the speaker mounted around 1/3 or more away from the starting area.
@@svojon ok. If I get you right. You mean to mount the speaker 1/3 inside the area. But he did not do that. He mounted it right at the edge of the open area. And in between the the spaces right at the area that those spaces meet. Sorry I still have no idea what you mean. He placed the speaker in an open baffle in the wall between the room and the outside. How is that mounting it 1/3 of anything. Make it make sense.
Another awesome video from my kind of nutter. I love your energy. Don't think my landlord would be too happy if I cut a hole in the wall though. Thanks for sharing your kindness. It's rare these days for people to genuinely care. I had tears at the end. Thank you
Your videos always inspire me to do something crazy for the audio for my little car. Now im thinking a transmission line with a passive radiator just because its crazy! Hope you are keeping well mate 😊 looking forward to the next video!
You can also build the backside of your infinite baffle into a connected garage, basement, attic or crawl space with usually very similar or "good enough" results. Somehow weather proofing your install should be the next priority.
Yeah buddy! In the late 80's i put a 15 inch cerwyn vega free air sub on a fat plywood across the gap behind the back seat on a 74 plymouth valient powered by a 1000 watt toshiba comp series... U could hear it moving 3 blocks away. 😅🎉
Back in my day I had an 81 cutlass supreme and we all know how good they are for reverb-aka hollow😅 I built a 3/8 chip board box that was probably 12 cubic feet but I ran out of plywood so there was a 3.5 in open air gap across the bottom of the box. I filled it with poly fill and I ran two 10’s and a Rockford fosgate punch 100 amp. The Sony head unit was like 60 amp per channel and I had two three ways in the “luggage tray” and four ways in the dash and I swear to bob that was the best sounding set up I’ve ever had!!!!!!!! I sold the car and haven’t beeen able to duplicate since!! Those cars with “ported” boxes are AWESOME! They’re almost, well akin to infinite as you talk because they’re true unibody and the only thing separating the trunk from the cabin is a weird hard foam type stuff of the rear seat backs! That car is in my bucket list btw😅
Years ago, I picked up a pair of infinite baffle subs not realising what they were… stuck em in a box in my car & wasn’t impressed… dug into why they were meh & discovered what infinite baffle was… Made up a mounting board to mount them directly to the car behind the back seats, effectively making the entire boot/trunk the box (as close as I was going to get to true infinite baffle inside the car). Wow what a difference it made.
Congratulations to you, Adam on your 10K milestone and being at 13.3K 6 days later! (today 27th July). I look forward to your future uploads on TH-cam. I am not religious but Prayers for Wayne too!!
Hi Adam's wife, thank you for saying "yes" to your husband so he can pursue his dreams :D
Haha, shes a good egg!
lol as if she had a choice
@@throwawaypt2throwawaypt2-xp8nx Clearly she did... the choices were "yes" and "absolutely". She picked "yes" even though she mispronounced it a little. I see no problem here.
@@soldjahboy ur making it sound like he even needed to ask her for permission lol
@@throwawaypt2throwawaypt2-xp8nx I can tell you're not married.
Listening to tones below audible frequency rattle everything in the the shed, goes outside "Almost no noise which is cool"...... Meanwhile the old guy 3 doors down with the giant glass window pulsing at 16hz "THE BOMBERS ARE COMING THE BOMBERS ARE COMING!"
Best comment, made me snort!
lmao
One of the best comments I've ever read on here🤣
This doesn't make any sense for it to be funnny. Fucckk offf you tube fagggot moderators as well
I live in UK for about 8 years and i've had to deal with lots of people - good and bad; but you,bruv are a different and rare species and i love that about you! Genuine, nice, kind and funny! LOVE what you do and LOVE your attitude! God bless!
Thankyou dude! Its all about just being nice and enjoying each day!
@@PacmanBasshead
*I IMAGINE YOU AND YOUR WIFE VOMITING ON EACH OTHER WHILE LISTENING TO "ENDLESS LOVE" BY LIONEL RICHIE AND DIANA ROSS!!* --- ROSEANNE BARR
We got ya, bud. Next time go with "I want to replace the garage window" and "it'll be more energy efficient"
I think the success of the video has persuaded her this was a good idea haha
@@PacmanBasshead I hope so!
Me and my family can’t thank you enough for your kind words and for sharing the donation link. Amazing message from you, Dad (Wayne) will be so overwhelmed when he knows the kind things everyone has done! Thankyou again
Its honestly my pleasure, fingers crossed we can help however we can!
prayers💗
You ended up on my FYP and I couldn’t be happier. You’re like a Colin Furze of audio, and I’m glad I found you. Keep it up and I’ll keep watching.
Haha. I do love colin, id love to meet him one day! He's about 4 hours away i believe
Agreed! There's genius in the madness.
recently lost my grandma to a very similar situation, so it is hitting closer to home than it should.
You'll find my donation in the list.
Keep up the good work on the channel and congrats for 10k subs.
Greetings from Italy
Sorry to hear that man, thankyou for your support 🙏
Just watched the end of the video. You've earned a subscriber, and my respect for your words and selflessness. Sharing your friends story and asking the community for help, you could see a glow in your face immediately. Can tell you're a genuine good person.
Never seen your channel before, congrats on the 10k!
I appreciate the wise words.
It's worth noting, the big attribute of the IB alignment isn't group delay, ... it's the extraordinary sensitivity increase that accompanies the acoustically large back-space.
The driver not needing to work against the air spring of a typical backspace, be it sealed, vented, whatever ... that's what elicits the coveted attributes of the IB.
Sensitivity
I've built/used multiple alignment platforms.
I built a quad 18" attic manifold IB for my primary system.
It's not without its drawbacks ... each approach possess unique pros and cons. Everything in loudspeaker design, especially subwoofer design, involves tradeoffs.
Solid content, much appreciated.
Cant wait to check out the other work!
Wise words from an educated person, thankyou! Super grateful you took the time to type all that out!
Adam: how big of a box do we need
His wife: *yes*
This was so funny and awesome!
I've not had any personal experiences with infinite baffle in a vehicle but if it does not play Bass outside, then it's a no from me.
I've seen a vehicle with subwoofers on the roof as the infinite baffle setup (they cut a hole in the roof for it to actually work lol).
I personally not gonna do that considering having the subs exposed to rain and elements but was very interesting for sure.
Congrats on 10K buddy
Thankyou!
Now 11k lol
@@christiangaming413113k*
One of your very best, loved the Stone Cold gag😀Nice touch at the end too.
@@andrewfrancis2581 cheers! I thought of you whilst i did this haha
One of my early builds was 4 8” subs in an infinite baffle set up on the rear deck of my large pontiac coupe. Wired into one channel the sound was amazing to my young ears and the sight of four drivers moving in unison was impressive at the time. As you noted , a downside to the set up was unchecked cone travel so the subs lasted about 6 months before the suspension got too loose and they had to replaced. I went through three sets of subs before I changed setups.
Donation made for your friend’s family, best wishes for his recovery.
Ah man thankyou so much! Im so grateful i can use this platform to reach incredible people!
And the view of multiple subs is so addictive!
Gotta get a sub more suited for IB. High Qts is one of the metrics you should look for. Or check for my other comment that'll lead you to a video where a guy explains it in depth. Of course, if you just want a sub recommendation, Fi IB315 is the ticket. In a sedan you can do two of them in a trunk baffle, and as long as you have a decently strong roll-off in your tuning below 20hz, you can run each one on 700w RMS (rated 600) and they won't stroke out like your worried about.
They don't even go above Xmax (which is not the same as the full mechanical limit) until 20hz on 700w, and that's true IB, not a 4x VAS or 10x VAS trunk baffle setup. At 600w rated RMS they don't hit Xmax until 10-15hz IIRC, so there's plenty of room to play with. Even more so if you set your lowest desired frequency higher (IE 25-30hz for the start of the roll-off) and/or have a particularly strong infrasonic roll-off like -18dB/octave or more.
@ I did infinite baffle set ups 35 years ago. I do sealed enclosures now.
key word being FOR (not WITH which is how i read the title) LOL
i bought a house needing a shit ton of reno last year that so happens to have the living room right above the garage. during the process i installed two 15's (Dayton Audio DCS380-4) hidden in the floor upfiring through air conditioning vents, backfiring into the garage. some of the best sounding bass i've heard for sure - smooth with no peaks/dips, 'fast', quite deep and the biggest benefit is that you can hardly hear it from the outside since what little escapes from the front and back wave basically cancels out. oh yeah, and nobody knows where the subs are lol
To help make your Mrs love you again lol. Thanks for the video!
Haha thankyou! I'll get her some chocolate!
Gosh darnit, I love TH-cam so freaking much! Just a man, a shed, a phone and a brain that is thinking of stuff that for some reason, men's brains do...
Why is that BTW? Why do we dig us down in holes just because the earth is filled with numbers and stuff?
I know the reason... in the end it gives us a reason to buy STUFF, and we need something to do. Each weekend needs to be filled with work. Work that we want to do! :)
GJ, keep it going! :)
It's not just that. Weekends are the time we get to work on what we want to work on. Unless, like me, you have a pile of crap to clean up from when you took a week off to install enuf to get the car playing to my standards.
All matter has two properties in a man's brain. It can either be repaired or improved. If it's broken, fix it. If it's not broken, make it louder/faster/hotter/cheaper/flatter/stronger/easier. Should your matter break during the improvement process, simply repeat.
I played a bit with speakers myself, and one thing i found easy to do trying to lower the frequency of a speaker was add a bit of weight to the cone, right on top of the coil so it will slow down the movement of the membrane. Another thing that helps is adding another magnet on top of the existing one. It may sound crazy, but trust me you can turn a bass into a sub if you do both. Hope to get you to at least a few million subs you are hilarious cheers.
Congratulations you mad bugger!
May you quickly make it to 100,000 and put a subbie in the wall of the house!
And you will be able to rebuild your now crumbling garage!
You are the best my man! Please keep it up!
Cheers man!!
Love the amazing and creative videos! Everyone loves to see the channel grow, but as it grows make sure you keep spending time with your family because that is one of the most important things to anyone. Hope you can find a great balance and grow the channel to its full potential.
Mate always! The money from last months youtube has gone towards a week away for us all as the first time ive ever taken a wage ❤️
Love your message to the world man, keep up the good work
Wow! This channel is getting more and more amazing!
While group delay is a thing as long as it's flat it's curver is flat it can be corrected with delaying the other speakers. Even if not flat with a more advanced DSP it can be flattened.
A 15 in essentially a sealed box doing that is crazy! And my god i had that same reaction when i first played something seriously DEEP on my 8inch Tapped Horn that's tuned to 15hz. It's louder than the Ported 15 that was also tuned to 15hz that i had before which is absolutely wicked!
I will absolutely help out buddy out a bit! Bass homies gotta take care of each other!
Thankyou brother 🙏 their family will massively appreciate it!
I would love to do this but my parents would will me lmaoo great video
Doodle u know this guy?
Lol
To be fair, my parents unintentionally willed me into most of the bad decisions I've made.
hi doodle
@@doodle9 and dumb kid 2..0
Wow Destin. Love how yu think.. Been me 4 a whyl. That's how I came to watch this channel. Yu seemed open minded. Yur honesty shows it. Loveit man. ❤
ah infinite baffle, my old friend.
Having experienced it in a car and a house thus far i can honestly say it's a truly awesome thing.
i hope your partner goes easy on you, better line up another window asap lol
Got one for tomorrow haha
I've done this in two different cars over the years, the effect is startling, even with a cheap 30 dollar Jensen woofer. Just had to be careful with power. I always recommend it, nearly built one for my living room. but SVS made for a cheaper alternative with similar results. Also the "no noise outside" was an effect we noticed for both cars. Keeps the bass in where you need it.
This man put himself in the doghouse with his old lady for our entertainment. Now that's dedication Yous all better like and subscribe!
Thats the rep i need right there 🔥
Can I just say I love your work mate, am a DIY sound enthusiast @ heart & honestly it's a breath of fresh air to stumble across one of your shorts while doom scrolling.
Greatings here from NZ, UP Da Wahs!
To update.....the garage now has a new window. No more breaking windows though!!! Maybe the garage door next so i can use that as an excuse to replace it. People please get behind me to persuade him that we need a new garage door!!! Please and thanks 🙏😂 give him ideas on how to break that...
I'm safe guys. Dunno when ill next get sugar though.
man every video of yours that i watch just makes me have a little more hope in a dream shattering world
Dont let the world shatter your dreams, everything's possible if you ignore the dickheads!
What a way to de-cobweb and remove dust from the place. :) Bet you'r neighbours teeth were rattling LOL
Donation given and shared. ;)
I might send it and stand on the road outside my house, see if its loading haha
@@PacmanBasshead Record it. Would be interesting to see how audible it is outside
Blessings to Wayne and his family🔊❤️✨
Congratulations on the 10k subs dude, you have a really refreshing little corner of the internet’s here🔊🔊
I seem to have found a pocket of joy where im lucky that all the good people come to me!
As a favor can you mount the sub inverted with the magnet inside. This will make you wire the sub backward but your electrical wont be outside. 🍻🎉👍🍻
Love the curiosity and I love the dedication, just found the channel and I will be binging a lot of your videos
Thankyou! It's all about just going for it, no one ever discovered anything by following the crowd 😆
Congratulations on 10k subs. Claim your Early Subscriber Reward by liking this comment!
Love your videos and the energy, makes me more and more interested in aftermarket audio systems
this guys energy is incredible i wish everyone was like you
Man, that means so much! Its all about feeling alive and being great to everyone. The worlds a scary place and if i can make people smile for 15 minutes, twice a month, then I'm doing my bit.
I'm up for the challenge 😉
You brought back my motivation to work on DIY speakers, thanks for that 🤗
A rotary subwoofer can also play those frequencies, but even wayyy louder! A disadvantage is that it can only go up to about 30-40 hz though depending on the design. It also uses an infinite baffle.
i really like the way you present what you do and the things you do! thats why i immediately followed your channel. i think your children are lucky with a basshead as a father! i wish you luck making more content!😁
@Ruben_Videography thankyou man!
Thank you for the video. i was watching a similar one with a diy rotor infrasub but wanted to see with a real speaker.
Im pricing up a rotary sub as we speak!
I've been running IB in my car for a couple years. You dont get much above 60hz reponse to the front. So you need a front sub like a 10" in sealed to do 60hz and above. You wont every feel anything like IB from an box. Plus you only need a few hundred watts.
Exactly, the temptation to do an extreme IB build is real and just destroy the car.
Some 8’s in the doors will push above 60hz alright (with some deadening and foam in the door).
I did an IB install in a mates merc . With an 12” FI IB3 sounded nuts and the bass just got deeper when you opened the boot.
Oh that's cool! Cutting the metal scares me haha
@@PacmanBasshead Its ok , make some metal baffle rings for support on top and bottom for reinforcement and as long as its not structural such as the spare tire well it wont hurt anything.
Infinite volume sealed box for the win. Open WinISD and model that. It's basically what is happening here. Then model the same woofer in a 3 cubic foot sealed box and apply the Linkwitz filter to boost the bass response down to the free air resonance of the woofer. You will have the exact same response. The same maximum SPL. It takes very little power to move the woofer at low frequencies. The woofer output is limited by its Xmax at low frequencies.
Loved this channel since the day I saw it on your Temu subwoofer video. Can't wait to see this channel get the subs it deserves and see what you have planned for future videos!
Thankyou man! The more it grows the crazier it can get!
really like the idea and the shaking lamps lol
The dumbest thing i found out is that you can use a midrange from a Teufel M550 FCR select as a subwoofer that goes down to below 50 hz
Considder making a manifold with 2 drivers wired in phase, but mechanically opposed. Or if you want to cancel out 2nd order harmonics mount 1 normal 1 inverted and wire 1 driver out of phase so the woofers move mechanically oposing in a push push configuration.
I think before I would modify the gas tank location, I might actually try this with my 97 civic, needs welding and other kind of engineering, but would be fun to try before fiberglassing stuff
Congratulation for 100,000 subscriber, so keep creation and be inspiration and gratefull
It's the first time I hear of an infinite baffle subwoofer. Awesome experiment, keep going!
That was a really entertaining video, but it was your appeal on behalf of Wayne and his family that earned my subscription. Best wishes to them.
To be fair, removing that window and putting wood there probably improved the insulation in the room. You've just improved your heating/cooling.
TH-cam recommended your channel to me. So glad they did as you are so funny & loved the idea .PS you just got another subscriber.
I have experimented as a younger teen we used to call those kind of speakers free air subs as they didnt need a box to run. Hatchback cars of the 70s and 80s were great as you could make a board to cover the hatch area and put some cheap speakers in it for a kid on a small budget this worked very well. Also pvc pipe works I would cut a small section about the same length as the speakers was wide and just leave the back side of the tube open.
I love seeing you making it big Adam!! As a one of a first subcriber it makes me feel good you are doing it so well!! Keep it up mate!
Will do dude!
"Yes there is a door, i'll close it, and hope for the best! (Me wife not catching me! )😂 Best wishes to the two of you!!!
Glad to be able to be one of those subs! Love the channel Adam!
Pleased to have you along mate! I'll do my best!
man you are crazy just yesterday I came across a video of yours and I knew I had to subscribe.
you rarely see people like you anymore.
Keep it up
❤
Thanks dude! I will do! Keep watching and i'll keep making!
Infinite baffle and offset transmission lines are my favorite. When paired with a nice amplifier, the drums sound more realistic and have a tight snap that will make your eyes blink.
What does offset transmission lines means in this context?
@@cajampa Exactly what he shows in this video. He didn't mount the driver near the start of the line. It was mounted around 1/3rd from the starting point. Doing so helps reduce the midrange ripple. You can test this yourself by measuring the impedance curve and comparing the results.
@@svojon Thanks, but wow. I have no idea what you are talking about man. Sorry to tell you. I am not well versed in building subs and I can not parse what you are telling me.
Are you talking about the mounting position somehow....was is the line and what is the starting point?
@@cajampa I'll try to keep it simple. Think of a TL as a simple straight pipe. The starting area is the side of the pipe that's sealed off. The ending area is the opposite side that's open. Normally the speaker is mounted near the starting area. The offset design has the speaker mounted around 1/3 or more away from the starting area.
@@svojon ok. If I get you right. You mean to mount the speaker 1/3 inside the area. But he did not do that. He mounted it right at the edge of the open area. And in between the the spaces right at the area that those spaces meet.
Sorry I still have no idea what you mean. He placed the speaker in an open baffle in the wall between the room and the outside.
How is that mounting it 1/3 of anything. Make it make sense.
Solid Video. Love what is even possible with an Infinite baffle Design man.
Dude i don't no you but you have a good heart and i enjoyed this video . Thanks for everything you do.
Thankyou for taking the time to comment and for the complement, it only take 2 seconds to make someone smile!
This is absolutely nuts! Thanks for making an entertaining video and teaching me something new
LOVE this Channel!
Best thing to watch when buzzed on a Saturday night!
Also Donated.
Congrats on 10K Adam!!! Cheers from Brazil!!
Heya gustav! Thankyou from england!
The part with you getting permission, made me subscribe funnies😂
Haha, you know its the safest way
Ive been on your channel for quiet a while and i love to see you grow man, you deserve it :D
Thanks man! Its going so well im so happy!!
@@PacmanBasshead Just remember me when the Golden Play Button arrives haha :D Keep it going!!
@@Dunlie369 will do maaan!!
Another awesome video from my kind of nutter. I love your energy. Don't think my landlord would be too happy if I cut a hole in the wall though.
Thanks for sharing your kindness. It's rare these days for people to genuinely care. I had tears at the end. Thank you
It takes one to know one you are nuts ……. Me too 😂👊🤝 sending good vibes 💚🎼Nathan.🙏
your videos are such a joy to watch. top shelf entertainment
Thanks for sharing the fundraiser. I hope the insurance soon payout and your friend recovers.
excited that someone gets to build a t-line, i really need to learn how to design boxes better
absolute mad lad glad youtube recommend your video enjoyed it very much. The energy you put on your video very interesting.
Your videos always inspire me to do something crazy for the audio for my little car. Now im thinking a transmission line with a passive radiator just because its crazy! Hope you are keeping well mate 😊 looking forward to the next video!
I've always wanted to try an infinite baffle setup. Great video, and congratulations 🎊
Oh you HAVE TO. Its incredible!
Also nice message, thanks for posting the gofundme. Helping him out few dollars, i hope he pulls through.
Thanks man, really appreciate that!
You can also build the backside of your infinite baffle into a connected garage, basement, attic or crawl space with usually very similar or "good enough" results. Somehow weather proofing your install should be the next priority.
congrats on 10k
OMG I remember the time when I was obsessed with dubstep and wanted a speaker like this back in 2014 lol
That stone cold window shatter 😂😂😂
Speakers are the best invention in the history of mankind
Subs with a QTS of .07 or higher generally work good for IB applications. Also, it might be time for tuckpointing that brick wall.
Been tempted to do a long tube TL. With an 8" this makes for a window rig much more tempting
Aperiodic
This guy needs more recognition 🤣I've never laughed more from a subwoofer video in my life XD
Amazing haha, thanks for the feedback thats really great to hear, glad you laughed!
@@PacmanBasshead Absolutely bro! Keep it up, can't wait for the next one 💪
Yeah buddy! In the late 80's i put a 15 inch cerwyn vega free air sub on a fat plywood across the gap behind the back seat on a 74 plymouth valient powered by a 1000 watt toshiba comp series... U could hear it moving 3 blocks away. 😅🎉
A TOSHIBA?! WOW!
Congratulations on the 10 000 subs! been loving your videos on cheap audio systems and such. definitely in for any challenge you got going on
Bro im glad i have been here since the hundreds. Its the best frikkin blow up!!!
My god man you are mentai! Love it so glad I found you.
Im so glad you did too man, so happy to have such an amazing following
I’m a simple man I see a good quality bass video I click 🤷🏾♂️
IB is great. Works well in vehicles and loud as hell on low power
Yeah the temptation to cut up my passat is ENORMOUS!
Back in my day I had an 81 cutlass supreme and we all know how good they are for reverb-aka hollow😅 I built a 3/8 chip board box that was probably 12 cubic feet but I ran out of plywood so there was a 3.5 in open air gap across the bottom of the box. I filled it with poly fill and I ran two 10’s and a Rockford fosgate punch 100 amp. The Sony head unit was like 60 amp per channel and I had two three ways in the “luggage tray” and four ways in the dash and I swear to bob that was the best sounding set up I’ve ever had!!!!!!!! I sold the car and haven’t beeen able to duplicate since!! Those cars with “ported” boxes are AWESOME! They’re almost, well akin to infinite as you talk because they’re true unibody and the only thing separating the trunk from the cabin is a weird hard foam type stuff of the rear seat backs! That car is in my bucket list btw😅
Years ago, I picked up a pair of infinite baffle subs not realising what they were… stuck em in a box in my car & wasn’t impressed… dug into why they were meh & discovered what infinite baffle was…
Made up a mounting board to mount them directly to the car behind the back seats, effectively making the entire boot/trunk the box (as close as I was going to get to true infinite baffle inside the car). Wow what a difference it made.
Loved the wire ties on the battery terminals!
Subbed, donated, prayed. Love the content, and also wishing well for Wayne. I really hope he manages to recover. Thanks for the video. 👊
Congrats Adam
You deserves even more.
On the way to 100k mate🎉🎉
Onwards and upwards mate!
I've been here since the beginning love your content keep it up and you'll be at 100k very soon
I hope so man! Silly builds at that point in time!
That baffle would make a nice spot for a rotary subwoofer ( variable pitch propeller subwoofer ) would 👋 slap…
My doorway would also make a nice spot...
Its as if theres another video planned for the future..
Congratulations to you, Adam on your 10K milestone and being at 13.3K 6 days later! (today 27th July).
I look forward to your future uploads on TH-cam.
I am not religious but Prayers for Wayne too!!
Only found your channel a couple of days ago love it, you seem like a deacent guy keep it up
Hey, thanks!
Congrats on the 10000 Subs!
Wassup man, mind telling me where you got that little bluetooth amplifier, it hits great, thanks