Great shave! I did the same comparison shave with my 6S and 6C (Gunmetal) and found the 6C, like you, more comfortable. I did several comparison shaves, changing to different sides of the face I'd shave with the razors. I even had my wife, on a couple occasions, shave me blindfolded and I could always pick the side done with the 6C. No worries as she use to be a professional barber. On can still get her to give me a shave with a straight razor, if I detail her car.
I have a Rockwell 6c in the beautiful gunmetal finish. Before this I bought an Edwin Jagger and a Merkur 34c. I wish that I didn't waste my money on those. They were an investment in learning though. I had alignment problems on these but that could be adjusted. The Rockwell was spot on with no tweaking necessary. I found my razor, now I can waste money on shaving soaps!
Hello Kevy! I am Brazilian and new to traditional wet shaving this century (I will be 64 tomorrow and my first shavings 50 years ago were…wet). I enjoy very much your videos and like the way you talk about a lot of things while looking to a mirror (I suppose). Best regards!
Today's session answered many curiosities regarding the 6C. It appears to glide like skis through snow. The 6S skates on ice with ample feedback from the blade. The Rockwell "T" has met with some conjecture as I have read, and spoken to other wet shavers. This concern is regarding the refusal of Rockwell to reveal where the Model T is manufactured. This has caused many to request full refunds of their pre-orders. I am not swayed so easily with hearsay, but I am concerned with the non disclosure by this company. A deck of 100 Nacet was a very wise buy! I enjoy the blade immensely myself. Erica Salmons turned me on to Nacet; and I have been a fan ever since. This was a thoughtful, and necessary contrast and comparison. Well executed, with very little pickups! If faced with the choice, I would choose the 6S. I suppose I fall within the pro stainless side of the aisle. It appears you're needing a new tub of Highland Bothy. I hope you still have TGGR vouchers burning a hole in your pocket. That knot is reminiscent of a Kabuki foundation brush. It flings lather very well. You'd surely win a lather fight with anyone using a standard knot. Cheers!
I'm hoping the Model T is as successful as the 6S and 6C have become. It must be frustrating to those that have been on the wait list for so long. I'll wait to hear what the reviews are like first before thinking about adding one to the den. Nacet blades are excellent. The Groom Room voichers have been cashed in already! I really enjoy this dark smoky scent. It is an unusual knot but it seems to work very well. Cheers. Kevy
I absolutely love my 6C. I never thought I would use any other plates besides 6. My beard is so heavy in the morning I use the 6 plate and if I go out in the evening I use the 1 or 2 plate to take care of my 5’o’clock shadow to rejuvenate me for the evening. Great videos Kevy!
Great shave. Comparing the Rockwell 6S and 6C razors is like comparing an iPhone with an Android. One sticks to the iPhone while one sticks with an Android phone because it all comes down to performance and feel. It's gonna be extremely cold in where I live so I gotta stay warm. Have a great week
A couple of months ago I high polished the edge of the cap and all four of the plate faces of my 2-4 6S base plate (try saying that quickly when you’re pissed! ) After using it almost daily since then I think it does give a smoother shave. The next job is to polish the whole of the top cap.
Hi Kevy, Received my Rockwell 6c and am trying to decide on a suitable plate as I have very sensitive skin. I replied to one of your video's a few weeks ago but can't for the life of me find it! Your video's are really good and have now ordered Mitchells woolfat after your review. Love Arko and Taylor's Eton College and have just got Proraso white. My face is still sore after each use with any soap. I do 3 passes and am gentle. Had Acne as a teenager (58 now) so don't have smooth skin which doesn't help. I used plate 2 today. 4 the other day and the 2 was not really close enough and the 4 cut me a few times because of my bad skin.I use quality brushes and Feather blades. I will keep at it. I have been wet shaving for many years and have a 34c, EJ 89, mulhe R89, new Rockwell, and an open comb 1945 broad arrow stamped Razor by A S & CO. The pain is waiting for the stubble to grow so you can shave again, you can't just practice whenever you like🤣🤣. Any advice would be helpful mate. Take care and stay safe! Dave.
Hi Dave. You're using good gear but the one thing I would suggest is that you try some different blades. Feather blades are great, but they are very sharp and any blemish on the skin, and Feathers will nick the top off. There are many different blades out there for you to try and they are cheap. Some won't work for you, some will be ok but it takes time to find out which work really well for your skin type. That's the fun part, trying them all out to see which one works best for you. Also, make sure your lather is properly hydrated with enough water to make it slick and protective. Kevy 👍😀
@@kevyshaves4109 Thanks mate!! I was just watching your top 5 blades when your message came through as I was thinking the same! I was working on the principle that the sharper the blade, the less time I spent with razor against face making it sore. But my feathers are so very sharp that my Acne scarred face suffers!! Any you would recommend? Cheers, Dave.
Gillette Nacet. Treet Platinum, Astra Superior platinum, derby Usta, gillette silver blue, Personna platinum... Theres 100's of different blades out there. Try and get a sampler pack first to try. Kevy 👍
I loved my 6S. I bought it for the durability, I'm a truck driver. I Watched Matt's video from Razor Impourium and upgraded to the 6S with Rhodium plating. I get the glide of the 6C with the durability of the 6S. Both are great razors as far as shave quality.
Thx much Kevy I have the 6s but you convinced me I need to add another to the collection I purchased the 6 c will be here tomorrow looking forward to it thx again good friend
I get as good with one as the other. I don't use it much anymore since I got the T2ss. It's just smoother on my skin. Easier to adjust as well. It still is one of my favorites though. I tend to use a non adjustable though when I don't use the Rockwell T2SS. I have several I like. It's good to have choices. My goal is to have one of every reasonably priced good quality razor.
Hi Kevy- Great shave and razor comparison; thank you! The Rockwell system is great and was a game changer for me. I started with the 6C and it is still my favorite of the two. Great looking soap, too. I hope your week is going well and all the best, Kevy!
Hi Kevy, I enjoyed watching your review. Clear, simple, and direct. Not only learnt about the two razors. I learnt about the nice product to uuse aftershave.
Hey Kevy, I love Highland Bothy! I purchased it in person from Matt at Razor Emporium at the Big Shave West 2017 in Los Angeles. Anyone who likes peaty Lagavulin or Laphroaig will love this scent. In fact I pulled mine off the shelf while watching and will use it tomorrow with Nacet blades and one of my Rockwell razors. I have the Gunmetal and its like the chrome. p.s. I also have the Nivea 2 Phase I purchased on eBay from Germany so I guess I will duplicate your shave. I just don't have the special "Kevy Shaves" bowl. LOL. Cheers, Mark
Nice one Mark. The highland Bothy is. Great scents soap and performs great. I could send you the bowl but I think by the time it got to you, you would have a full beard! 😂
HI Kevy, I secumbed and ordered the Rockwell 6s to go with my 6c! I know the 6c glides better but I'm a stickler for quality!! I love stainless Steel razors. My best to you and the family. Stay safe mate. Dave.
@@kcb8130 The 6s has a balance point about 1 1/4" (30mm) down the handle from the base plate. It is a great razor and smooth with any plate you use. Dave.
Great comparison Kevy, I find your comments and considerations always very intelligent and spot-on. You seem to be also a nice person, with a good sense of humour. Great channel. Cheers!
Great comparison shave. Science can be fun! I’m waiting for delivery of the 6S because it is so widely loved. Thanks for featuring the Highland Bothy soap. I have ordered a couple of other soaps from them but It was not available just now. Sounds like a great scent though.
I’m so torn. I’m fairly new to wet shaving. I’ve tried a few but have it narrowed down to either the S or the C. I have the C and like it but I like the idea of the S for durability 🤔Well the 6S it is. Man this thing is sweet!
after having a few zamack razors either fall apart or corrode (edwin jaggers) i personally would only ever buy stainless or aluminum or any other solid metal besides zinc. i polished my 6s and it looks just like chrome now, was not hard at all with a light wheel. i have more razors then i can even remember honestly. WAY to many lol and i would put the 6s up with wolfman, above the tie etc its really a great razor in stainless for the money.
Great comparison shave, Kevy! I've got a 4C in Gun Metal (well, it's the 2C but I bought the 2/4 plate). I did have an issue with the blade alignment when I first got it but Rockwell was quick to make things right. I have to say, I'm REALLY torn between it and the Parker Variant. I'm ALMOST to the point where I could sell all my other razors ... almost. Have a great week! Love to you, Mrs. Kevy, and Riley!
Hey Jack. Glad to hear the guys at Rockwell fixed things for you. If I were you, I would keep both those razors if you're getting rid of everything else. Nice to have some variety in your shaves. But yes, I agree with you, they are both excellent razors. Have a great week ahead. Kevy 😀👍
You love Rockwell, don't you? With your enthusiasm I'll buy 6c, budget question and personal, and glide factor we hich for daily shaving is still very important. Have fun and thank you
Great video! And great enthusiasm! But, darn! I have to buy yet an other razor... Haven't decided on 6c or 6s...... Think I am leaning towards the 6C...
Hi Kevy - another good video, thanks. Re Nivea 2-in-1, I live in the States, had to buy it from an EBay seller in Bulgaria. Purchased based on your recommendation/use, works great. Will look into the Rockwell 6C. Cheers
Kevy... did a similar comparison between the 6S and the 6C... both with Nacet blades and my usual prep. Both had very smooth shaves. The glide factor with the 6C was marginally better that the 6S for me, but not enough to be a big deal. However, what I did notice was I found the 6C to be a little harder to hold with wet hands. It is like the knurling on the handle of the 6C is not as pronounced as it is on the 6S. But, I love both razors. Thanks for another great video!
Thanks for the comparison Kevy, very helpful. I just ordered the 6S as I like a bit of weight, but after watching your video I'm planning on polishing the head to try match the glide of the 6C. Also ordered the Highland Bothy, can't wait to try. Keep it up mate, loving all your vid's!
Some of the vintage razors are great. Back then, they were built and designed to last. It's testament to those companies that the razors still shave well even after all these years. Kevy 😀
Awesome comparison,Highland Bothy is one of my favorite smelling soaps I own and shaved with it last night.I just need the Heather one and will own all of the Essence Of Scotland soaps.Sorry Im always late to the game,thanks for the videos,we appreciate ya Kevy 👍
Hello Kevy, I got my Rockwell 6C today, and I had to test it right away lol. The R1 plate was too mild, but the R3 gave a baby smoot shave. I will try the R2 plate tomorrow. I'm very satisfied with my new razor. Hopefully I can make my son interested in wet shaving, and then I give to him the 6C and buy the 6S to myself lol. Cheers.
Just ordered the 6S, hopefully the mild setting will fix my problem, my face has been like Flanders field on the summer of 1918, so much blood. Cheers from Lisarow Australia.
Bought the 6C as my second DE razor last month. Then I found a great package deal on the 6S... so I bought it. Had a really good shave with the 6C last week, and will be trying the 6S a little later. Since I thought that the 6C was heavy AF, I can only imagine how badly my hand will cramp up using the 6S. And since there was Aberfeldy in the soap, what's your favorite whisky, if you fancy a tipple?
Great comparison, Kevy! Your videos are always entertaining, informative and enjoyable to watch. I too picked the 6c (for the same reasons) and now am in great anticipation of its delivery! I'm watching as many 6c videos as I can , as I obsessively keep checking the tracking number. 🙃 I remember watching your video of the tour of the GGR, and would love to visit it, if I make it back across the pond.
I enjoyed the video as always Kevy. Good comparison between the 6S & 6C. Maybe I'll pick one of them up someday. Nacets are awesome blades. Glad you're enjoying them.
That was a fantastic and very interesting comparison shave Kevy! Thanks for the mention, you might need to send down some of that ice cold Scottish water if this heat doesn't let up lol. Take care mate. Cheers!👍
A timely video, Kevy as I’m intending to do exactly the same comparison tomorrow after I collect my new 6S from the local Royal Mail Delivery Office. I came home today to find the dreaded red ‘sorry we missed you’ card behind the door - Grrrr! I’ll let you know if I also find the 6C more glidey. 😉
Well Kevy, I compared them both and I share your opinion that the 6C is more glidey. The 6S still delivers a fantastic shave but there is an almost imperceptible drag on the skin that you don't get with the chrome version. For what it's worth, I prefer the stainless steel version due to its slightly heavier weight and grippier knurling on the handle.
Very interesting and detailed Comparison. I have the 6C must use it more, would love the visit the Gentlemans Groom room. Maybe when the weather breaks, us Londoner can’t take the cold. I’ve heard that the people that supported the kick starter program for the Rockwell model T are the ones that are now receiving the razor I put an order in last November no word as yet.
It is indeed a rare antique soap scooper abe, very well spotted. It was used in the 18th century by the Spanish royal family to scoop soap out before adding it to smoked chorizo. Soap was a delicacy in Spain in the 18th century. Cheers. Kevy 😉😂😂👍
It's why I like my Futur in the polished chrome as well. Have you done a comparison on the Variant vs the Progress for smoothness with the Progress being Polished Chrome?
@@kevyshaves4109 Cool! I am watching all your vids from the beginning, but I have also watched a few ahead to learn things and see the awesome stores you have visited. 😊
DS cosmetic tuxedo fibres are indeed very crimped, compared with other tuxedo knots out there. I prefer Yaqi synthetics but the DS flat top knots are amazing too!
nav m I have several Yaqis and very happy with. I have fan shapes and like them as much as the bulbs. Never had a flat top though. Would you recommend rhem? Why? Are they better than fan shape?
@@Juraberg Sorry for the late reply. The flat top isn't better than a fan of bulb perse, however, they do give a very unique experience for sure. They don't require any splay to generate lather and the face feel is very unique. For these reasons, I highly recommend the flat tops.
Hello Kevy, Nice shave as always. I just fell in the rabbit hole and ordered the Rockwell 6C razor, lol. I have been using the Razorock German 37 Slant, but the razor feels sometimes to be too aggressiv, specially if I have some nicks. Hopefully now I can change to the milder plate if needed.
I love the look from the finish from the 6S. Looks so good. But because of the money i bought the 6C. It's a very smooth shaver. And now i know the decision was good. 😉👍 Great shave. Thank you. Have a great week! Jens
@@kevyshaves4109 i have read that about the gliding from the first owners too. Many people have both and some said it. I think the 6C was a good choice and so i could save money..... Hahahaha. Saving money... Buying more soaps, oder Razors, blades, brushes... You know what i mean. 😉
Been using a King C Gillette safety razor for awhile has done me well. And will be getting the Rockwell 6C before long. Just because of the Chrome Factor. Thanks for the video Kevy!
I own the 6C gun metal and it's a great razor. I have extremely coarse hair with very sensitive skin and hair grows fast. Thus 5-7 days growth results in a full, heavy beard and the Rockwell R6 plate (with an assortment of blades) handles the beard with ease. Constantly surprised at the volume of hair this razor can handle without getting clogged You won't regret buying this piece of kit!
@@kcb8130 yea shaved with it last night. I used every plate to see which one I liked and plate 3 and 4 does does great for 3 day beard growth. I used plate 6 first and it felt rough but but didn't cut me to that's a winner lol
Hey Kevy be careful if u are thinking about the Model T I canceled my order after waiting for 7 months since I first ordered the Model T back in May of 2018 before enduring endless B.S. up until Dec of 2018 Rockwell said that the first receiving date was in Aug of 18 then pushed back to Oct of 18 then possibly in Dec of 18 then further excuses of falling behind in production and closing down their shipping plant over Christmas and New Year after supposedly promising some people my self included that some orders would be received by the end of 18 but I wasn’t biting anymore on their BS so I got my refund and bought myself a Rex Ambassador and never looked back sure I paid more for my razor but no regrets. Enjoyed the video maybe the price on the Rex will drop one can only hope but feel sorry for all the other customers who are getting the shaft.
That's a shame to hear that about your wait for the Model T. Hopefully Rockwell will get things sorted out for the others who are still waiting. I'm going to get a Rex Ambassador later this year. I've tried one and they are excellent. Cheers. Kevy 😀👍
Great shave comparison. I pondered for quite awhile on which to buy, he 6S or the 6C. I finally decided on the 6C for two reasons, price and looks. I'm old and shiny things catch my eye, LOL. I haven't tried the R5 or R6 plates yet. I'm going to try them changing plates as I change passes.
@@kevyshaves4109 Okay, today I was feeling brave. I had a 3 day growth. Used my Rockwell 6C with the R6 plate (Polsilver 2nd use) for 3 full passes and pick up. WOW, that R6 plate mowed down the stubble on the first pass like a hot knife through butter. I could have stopped at 2 passes but was having fun. I got a little irritation, but not bad Next up: 3 passes with the R5.
Today was the R5 plate. Had a great shave, 3 passes. Very minor irritation that was gone within the hour. So, my opinion, the R6 plate is too aggressive for me for 2 or 3 passes, but will definitely be used for 1st passes. The R5 plate was great and smooth with 3 full passes and pick up.
"Squiggly" works for me 👍 Fantastic lather with that soap,and must be super slick to be able to touch-up with an aggressive razor on bare skin. I agree, it does smell wonderful.
Bit late to the party here but great comparison nonetheless. I understand the 'smoother' shave with the high polish of the 6C but I prefer the stainless steel version...just because it's stainless steel.
Kevy, good job. Thank You for your service. How does the soap you grated Tabac and Mitchel perform? Can you show them shaving sometime? Best wishes Wojtek (Voytek)
After just under 2 years my 6c broke .. thread has worn out so cannot be tightened .. I have just purchased the 6s which being stainless not an alloy or chrome pkated will hopefully not suffer the same fate...
Hi Tomas. My choices would be Polsilver Super Iridium, Feather and Gillette Nacet or Gillette Silver Blue. All excellent blades and very smooth to use. The Feather is the sharpest blade out there. Cheers. Kevy 😀👍
Stainless steel has much better acoustic properties (vibration transfer). Because of that it's a top material for electric guitar bridges, much better than zinc alloys.
Hey men I just ordered this razed today but I don’t understand the 1 is the last aggressive but you start with 6 why everyone starts with the most aggressive?
@@kevyshaves4109 hey men I just wanted to give you a update got it in the mail today and went straight for a shave started on 1 because in the box was a noted that said if you never shaved with a safety razor before start on 1 but it barley took any hair of so I went to 3 and that worked it feels so nice it a little difficult on the jawline but nothing to difficult with some practice It doesn’t pull like a cartridge razor the reason I bought it is because I got some in grown hairs on the neck I hope this razor will fix that
your one of the most entertaining shaving channels. I don't know if I'm asking too much can you do a comparison review between the one blade and the supply company single edge injector razor? In your experience what's the top single edge razor?
Thanks. I've used the one blade but I only had it as I borrowed it from a friend to try it out. The Supply is a good razor too. My favourite SE razor is a Gem 1912. There's lots of vintage SE razors out there for great prices. Cheers. Kevy 👍
Nice video. I have the 6S, the model T and the Rex ambassador. I have to say the 6S is much much much better razor for me. I was thinking getting another 6S and have it recoated. I think I'll be selling all my Gellett Adjustable and all others. Just keep the 6S
Nice comparison on the two choices....~! Bottom line as a budget guy I have the 6c on my wish list ~! I would think the audio feed back is do to different vibration levels on the two different metal materials? My 316 grade Stainless Razorock Game Changer .84 is pretty quiet too . Great Job Kevy Kit
Kevy, I've never seen anyone get as much enjoyment out of shaving and post shave as you do. I really enjoy your videos.
Thanks, that's very kind of you. Kevy 😀👍
I like the fact that guys like PaulH, Sinatra, Kevy and KenSurfs are all genuine, top blokes you just want to hang out with
Great shave! I did the same comparison shave with my 6S and 6C (Gunmetal) and found the 6C, like you, more comfortable. I did several comparison shaves, changing to different sides of the face I'd shave with the razors. I even had my wife, on a couple occasions, shave me blindfolded and I could always pick the side done with the 6C. No worries as she use to be a professional barber. On can still get her to give me a shave with a straight razor, if I detail her car.
I didn't think there would be much of a difference but the 6C definitely felt smoother going over the skin. Cheers. Kevy 👍
I have a Rockwell 6c in the beautiful gunmetal finish. Before this I bought an Edwin Jagger and a Merkur 34c. I wish that I didn't waste my money on those. They were an investment in learning though. I had alignment problems on these but that could be adjusted. The Rockwell was spot on with no tweaking necessary. I found my razor, now I can waste money on shaving soaps!
Hello Kevy!
I am Brazilian and new to traditional wet shaving this century (I will be 64 tomorrow and my first shavings 50 years ago were…wet). I enjoy very much your videos and like the way you talk about a lot of things while looking to a mirror (I suppose).
Best regards!
Great shave Kevy
I have the Rockwell 6C
Gunmetal
It's a fantastic shaver as well
Thanks which better 6c or 6s Iwant buy one
@@nawafalrashidi4774 consider the Rockwell model T
Today's session answered many curiosities regarding the 6C. It appears to glide like skis through snow. The 6S skates on ice with ample feedback from the blade. The Rockwell "T" has met with some conjecture as I have read, and spoken to other wet shavers. This concern is regarding the refusal of Rockwell to reveal where the Model T is manufactured. This has caused many to request full refunds of their pre-orders. I am not swayed so easily with hearsay, but I am concerned with the non disclosure by this company. A deck of 100 Nacet was a very wise buy! I enjoy the blade immensely myself. Erica Salmons turned me on to Nacet; and I have been a fan ever since. This was a thoughtful, and necessary contrast and comparison. Well executed, with very little pickups! If faced with the choice, I would choose the 6S. I suppose I fall within the pro stainless side of the aisle. It appears you're needing a new tub of Highland Bothy. I hope you still have TGGR vouchers burning a hole in your pocket. That knot is reminiscent of a Kabuki foundation brush. It flings lather very well. You'd surely win a lather fight with anyone using a standard knot. Cheers!
I'm hoping the Model T is as successful as the 6S and 6C have become. It must be frustrating to those that have been on the wait list for so long. I'll wait to hear what the reviews are like first before thinking about adding one to the den. Nacet blades are excellent. The Groom Room voichers have been cashed in already! I really enjoy this dark smoky scent. It is an unusual knot but it seems to work very well. Cheers. Kevy
I absolutely love my 6C. I never thought I would use any other plates besides 6. My beard is so heavy in the morning I use the 6 plate and if I go out in the evening I use the 1 or 2 plate to take care of my 5’o’clock shadow to rejuvenate me for the evening. Great videos Kevy!
Good stuff John. I've done that before too. The 1 or 2 plate is perfect for a quick comfortable shave with a few hours growth. Cheers. Kevy 😀👍
Great shave. Comparing the Rockwell 6S and 6C razors is like comparing an iPhone with an Android. One sticks to the iPhone while one sticks with an Android phone because it all comes down to performance and feel. It's gonna be extremely cold in where I live so I gotta stay warm. Have a great week
Great comment. You're completely right in what you say. Stay warm. Kevy 👍
31:42: Razor comparison conclusion - you are welcome!
Fantastic comparison shave Kevy. That soap looked amazing. Thanks for the awesome video. Take care and cheers.
A couple of months ago I high polished the edge of the cap and all four of the plate faces of my 2-4 6S base plate (try saying that quickly when you’re pissed! ) After using it almost daily since then I think it does give a smoother shave. The next job is to polish the whole of the top cap.
Hi Kevy,
Received my Rockwell 6c and am trying to decide on a suitable plate as I have very sensitive skin. I replied to one of your video's a few weeks ago but can't for the life of me find it! Your video's are really good and have now ordered Mitchells woolfat after your review. Love Arko and Taylor's Eton College and have just got Proraso white. My face is still sore after each use with any soap. I do 3 passes and am gentle. Had Acne as a teenager (58 now) so don't have smooth skin which doesn't help. I used plate 2 today. 4 the other day and the 2 was not really close enough and the 4 cut me a few times because of my bad skin.I use quality brushes and Feather blades. I will keep at it. I have been wet shaving for many years and have a 34c, EJ 89, mulhe R89, new Rockwell, and an open comb 1945 broad arrow stamped Razor by A S & CO. The pain is waiting for the stubble to grow so you can shave again, you can't just practice whenever you like🤣🤣. Any advice would be helpful mate. Take care and stay safe!
Dave.
Hi Dave. You're using good gear but the one thing I would suggest is that you try some different blades. Feather blades are great, but they are very sharp and any blemish on the skin, and Feathers will nick the top off. There are many different blades out there for you to try and they are cheap. Some won't work for you, some will be ok but it takes time to find out which work really well for your skin type. That's the fun part, trying them all out to see which one works best for you. Also, make sure your lather is properly hydrated with enough water to make it slick and protective. Kevy 👍😀
@@kevyshaves4109 Thanks mate!! I was just watching your top 5 blades when your message came through as I was thinking the same! I was working on the principle that the sharper the blade, the less time I spent with razor against face making it sore. But my feathers are so very sharp that my Acne scarred face suffers!! Any you would recommend?
Cheers,
Dave.
Gillette Nacet. Treet Platinum, Astra Superior platinum, derby Usta, gillette silver blue, Personna platinum... Theres 100's of different blades out there. Try and get a sampler pack first to try. Kevy 👍
@@kevyshaves4109 ok mate, thanks!
Have a look at connaughtshaving.co.uk for blades and sample packs. 👍
Great comparison video Kevy! I knew I wasnt imagining the difference in glide.
No, you weren't Mark. Cheers. Kevy 👍
what a nice clean shave! ty for video, I am plenty excited for my 6c arriving in 2 days
Love my 6S but now I am tempted to pull the trigger on the 6C...
I loved my 6S. I bought it for the durability, I'm a truck driver. I Watched Matt's video from Razor Impourium and upgraded to the 6S with Rhodium plating. I get the glide of the 6C with the durability of the 6S. Both are great razors as far as shave quality.
Thx much Kevy I have the 6s but you convinced me I need to add another to the collection I purchased the 6 c will be here tomorrow looking forward to it thx again good friend
Good choice Michael. I think you definitely need both in your den! 😂😀👍
I get as good with one as the other. I don't use it much anymore since I got the T2ss. It's just smoother on my skin. Easier to adjust as well. It still is one of my favorites though. I tend to use a non adjustable though when I don't use the Rockwell T2SS. I have several I like. It's good to have choices. My goal is to have one of every reasonably priced good quality razor.
Hi Kevy, on your input I tried the Gillette Nacet, Vow vow amazing good, sharp enough and not too hard. Nice tip, thanks
Glad to hear that 🙂
The Highland Bothy soap is fantastic. Reminds me of days camping and the wet canvas smell. Add a good amount of campfire smoke!
Great video Kevy!
👍🏻
You've nailed the scent of the soap with that comment Gordon. Nice one. Cheers mate. Kevy 😀👍
Hi Kevy- Great shave and razor comparison; thank you! The Rockwell system is great and was a game changer for me. I started with the 6C and it is still my favorite of the two. Great looking soap, too. I hope your week is going well and all the best, Kevy!
Cheers Mike 😀👍
That NIvea Afterhshave is available on eBay and the name is now 2in1. Great product!
Hi Kevy, I enjoyed watching your review. Clear, simple, and direct.
Not only learnt about the two razors. I learnt about the nice product to uuse aftershave.
great comparison
Hey Kevy, I love Highland Bothy! I purchased it in person from Matt at Razor Emporium at the Big Shave West 2017 in Los Angeles. Anyone who likes peaty Lagavulin or Laphroaig will love this scent. In fact I pulled mine off the shelf while watching and will use it tomorrow with Nacet blades and one of my Rockwell razors. I have the Gunmetal and its like the chrome. p.s. I also have the Nivea 2 Phase I purchased on eBay from Germany so I guess I will duplicate your shave. I just don't have the special "Kevy Shaves" bowl. LOL. Cheers, Mark
Nice one Mark. The highland Bothy is. Great scents soap and performs great. I could send you the bowl but I think by the time it got to you, you would have a full beard! 😂
HI Kevy,
I secumbed and ordered the Rockwell 6s to go with my 6c! I know the 6c glides better but I'm a stickler for quality!! I love stainless Steel razors. My best to you and the family. Stay safe mate.
Dave.
Do you find the 6s more balanced weight compared to the 6c?
@@kcb8130 The 6s has a balance point about 1 1/4" (30mm) down the handle from the base plate. It is a great razor and smooth with any plate you use.
Dave.
@@davesheppard8797 thanks for the response
Great comparison Kevy, I find your comments and considerations always very intelligent and spot-on. You seem to be also a nice person, with a good sense of humour. Great channel. Cheers!
Thank you 😃
Great comparison shave. Science can be fun! I’m waiting for delivery of the 6S because it is so widely loved. Thanks for featuring the Highland Bothy soap. I have ordered a couple of other soaps from them but It was not available just now. Sounds like a great scent though.
Nice shave sir. Great comparison.
Great comparison video, Kevy! The soap scent sounds very interesting.
Cheers! -Rob
I’m so torn. I’m fairly new to wet shaving. I’ve tried a few but have it narrowed down to either the S or the C. I have the C and like it but I like the idea of the S for durability 🤔Well the 6S it is. Man this thing is sweet!
Extreme lather frenzy! :-) That brush is something else too...
Thank You👍👍👍
Great shaving Kevy,i love this soap! good evening
Thanks Marco. It is a great soap. Cheers. Kevy 😀👍
just look at that beautiful base plate
it shows you the correct angle
few razors like this one
parker variant has a similar guiding angle
Just got 6c. Shaves like butter. So sweet
Great comparison kevy. I had been considering to do one. Glad you did.
Thanks. You can still do one. Be good to see what you thought of them both. Cheers. Kevy 😀👍
after having a few zamack razors either fall apart or corrode (edwin jaggers) i personally would only ever buy stainless or aluminum or any other solid metal besides zinc. i polished my 6s and it looks just like chrome now, was not hard at all with a light wheel. i have more razors then i can even remember honestly. WAY to many lol and i would put the 6s up with wolfman, above the tie etc its really a great razor in stainless for the money.
No weepers with the Rockwell Great video Kevy!
Cheers Mark 👍
You read my mind..great shave
Great comparison shave, Kevy! I've got a 4C in Gun Metal (well, it's the 2C but I bought the 2/4 plate). I did have an issue with the blade alignment when I first got it but Rockwell was quick to make things right. I have to say, I'm REALLY torn between it and the Parker Variant. I'm ALMOST to the point where I could sell all my other razors ... almost. Have a great week! Love to you, Mrs. Kevy, and Riley!
Hey Jack. Glad to hear the guys at Rockwell fixed things for you. If I were you, I would keep both those razors if you're getting rid of everything else. Nice to have some variety in your shaves. But yes, I agree with you, they are both excellent razors. Have a great week ahead. Kevy 😀👍
Hello I am partially sighted just wondering how big the numbers are on the face plate anyways around it will be grateful keep up the good work thanks
They're a good size and not too difficult to see. Kevy 👍
@@kevyshaves4109 thanks
I always enjoy your enthusiasm kevy
Thats some soap mate
Thanks Anthony. I love wet shaving and sharing these shaves with you all on here. Cheers. Kevy 😀👍
I believe the model T timeline on the website refers to orders placed now. I believe I should be getting mine in February 🤞
Good stuff. I look forward to hearing what you think of it. Cheers. Kevy 😀👍
You'll enjoy it I'm sure 😀
Banging shave!
Great comparison! I love my gunmetal 6c so much I thought about getting a chrome 6c for blade Comparison videos.
Cheers Jim. Does the gunmetal look more like the 6S? They all look great razors, no matter which one you have. All the best mate. Kevy 😀👍
The gunmetal version looks more like a charcoal version.
You love Rockwell, don't you? With your enthusiasm I'll buy 6c, budget question and personal, and glide factor we hich for daily shaving is still very important. Have fun and thank you
Let me know how it goes with the 6C. Kevy 🙂
@@kevyshaves4109 I've got it, today the most beautiful present, a shaving with 6S Rockwell, 6Stars💥💥💥💥💥💥 shaving 🔝🔝
@@danilobernaschina1842 Brilliant!!
Great video! And great enthusiasm! But, darn! I have to buy yet an other razor... Haven't decided on 6c or 6s...... Think I am leaning towards the 6C...
Whatever you choose will be great. Kevy 😀
@@kevyshaves4109 When with the 6C...
@@SIGSOLO Great choice 👍
Hi Kevy - another good video, thanks. Re Nivea 2-in-1, I live in the States, had to buy it from an EBay seller in Bulgaria. Purchased based on your recommendation/use, works great. Will look into the Rockwell 6C. Cheers
Available in Central America...$7.45 NOT really impressed. Better off using 2 products...
Nice to hear you got some 2 phase, it's great stuff. Yes, the 6C is an awesome razor. Cheers. Kevy 👍
@@kevyshaves4109 Any ideas on how/where to order the Highland Not by cream?
Highland not by cream? Is that a joke or a typo?
@@kevyshaves4109 An autocorrect change. Ugh. I meant the shave cream you used today. Thanks, wondering where to order online.
Kevy... did a similar comparison between the 6S and the 6C... both with Nacet blades and my usual prep. Both had very smooth shaves. The glide factor with the 6C was marginally better that the 6S for me, but not enough to be a big deal. However, what I did notice was I found the 6C to be a little harder to hold with wet hands. It is like the knurling on the handle of the 6C is not as pronounced as it is on the 6S. But, I love both razors. Thanks for another great video!
I did notice that the 6C glided a little bit easier over the skin. Great razors, yes. Cheers. Kevy 👍
Great video, Kevy. ,,,can you tell us what equipment are you using?,,,, camera and that stuff. Thanks a lot
I use a Sony camcorder and edit with imovie. Kevy 🙂
Thanks for the comparison Kevy, very helpful. I just ordered the 6S as I like a bit of weight, but after watching your video I'm planning on polishing the head to try match the glide of the 6C. Also ordered the Highland Bothy, can't wait to try. Keep it up mate, loving all your vid's!
Cheers. The 6S is a great razor. Kevy 🙂
New to DE shaving at the age of58 and was wondering how the vintage shavers compare to the more modern ones
Some of the vintage razors are great. Back then, they were built and designed to last. It's testament to those companies that the razors still shave well even after all these years. Kevy 😀
Awesome comparison,Highland Bothy is one of my favorite smelling soaps I own and shaved with it last night.I just need the Heather one and will own all of the Essence Of Scotland soaps.Sorry Im always late to the game,thanks for the videos,we appreciate ya Kevy 👍
Hey Troy. They're all great soaps. Kevy😀👍
I regret getting my 6C lol. Now I want the 6S.
Great video you're right the nacet blades are great sharp and smooth 👍
Hello Kevy, I got my Rockwell 6C today, and I had to test it right away lol. The R1 plate was too mild, but the R3 gave a baby smoot shave. I will try the R2 plate tomorrow. I'm very satisfied with my new razor. Hopefully I can make my son interested in wet shaving, and then I give to him the 6C and buy the 6S to myself lol. Cheers.
That's brilliant Leif. Good to,hear that you like it. Cheers. Kevy 👍
Just ordered the 6S, hopefully the mild setting will fix my problem, my face has been like Flanders field on the summer of 1918, so much blood. Cheers from Lisarow Australia.
I hope so David. What have you been using? Kevy 👍
David Bell how is it? I’ve just ordered mine
Bought the 6C as my second DE razor last month. Then I found a great package deal on the 6S... so I bought it. Had a really good shave with the 6C last week, and will be trying the 6S a little later. Since I thought that the 6C was heavy AF, I can only imagine how badly my hand will cramp up using the 6S.
And since there was Aberfeldy in the soap, what's your favorite whisky, if you fancy a tipple?
The 6S is a little heavier than the 6C but I’m sure you’ll enjoy it just as much. I don’t drink whisky, unless it’s in a sauce poured over haggis! 😀👍
Hello sir.😊
Please make a video for Rockwell vs game changer .84p
Great comparison, Kevy! Your videos are always entertaining, informative and enjoyable to watch. I too picked the 6c (for the same reasons) and now am in great anticipation of its delivery! I'm watching as many 6c videos as I can , as I obsessively keep checking the tracking number. 🙃 I remember watching your video of the tour of the GGR, and would love to visit it, if I make it back across the pond.
Great videos Kevy. Watching your reviews have helped in my selection of a new synthetic brush (The Starcraft by PAA) and the 6C.
👏👏
I enjoyed the video as always Kevy. Good comparison between the 6S & 6C. Maybe I'll pick one of them up someday.
Nacets are awesome blades. Glad you're enjoying them.
Hey Lyle. Thanks a lot for that. You should get yourself a 6C, awesome razor. I'm really liking the Nacets. Cheers. Kevy 😀👍
That was a fantastic and very interesting comparison shave Kevy! Thanks for the mention, you might need to send down some of that ice cold Scottish water if this heat doesn't let up lol. Take care mate. Cheers!👍
Ha ha! Nice one Tony. Stay cool mate. Kevy 👍
A timely video, Kevy as I’m intending to do exactly the same comparison tomorrow after I collect my new 6S from the local Royal Mail Delivery Office. I came home today to find the dreaded red ‘sorry we missed you’ card behind the door - Grrrr! I’ll let you know if I also find the 6C more glidey. 😉
Hi Derek. Great, looking forward to hearing what your thoughts are. Cheers. Kevy 😀👍
Well Kevy, I compared them both and I share your opinion that the 6C is more glidey. The 6S still delivers a fantastic shave but there is an almost imperceptible drag on the skin that you don't get with the chrome version. For what it's worth, I prefer the stainless steel version due to its slightly heavier weight and grippier knurling on the handle.
Very interesting and detailed Comparison. I have the 6C must use it more, would love the visit the Gentlemans Groom room. Maybe when the weather breaks, us Londoner can’t take the cold. I’ve heard that the people that supported the kick starter program for the Rockwell model T are the ones that are now receiving the razor I put an order in last November no word as yet.
Thanks Paul. Hopefully you'll make it across the border soon to visit the Groom Room. Hope you get your Model T soon. Cheers. Kevy 😀👍
When and if it arrives your more than welcome to take it for a test drive.
Wow! That'd be great Paul! Cheers. Kevy 😀
new to this world, watched all the shave guys and you are my fave
Thank you :)
Is that a teaspoon or is it a rare antique soap scooper? 🤔🤔🤔
It is indeed a rare antique soap scooper abe, very well spotted. It was used in the 18th century by the Spanish royal family to scoop soap out before adding it to smoked chorizo. Soap was a delicacy in Spain in the 18th century. Cheers. Kevy 😉😂😂👍
Good shave Kevy...saved us money...more beer...
Thanks. Everyone's a winner! 😀
It's why I like my Futur in the polished chrome as well. Have you done a comparison on the Variant vs the Progress for smoothness with the Progress being Polished Chrome?
Yes, I have made a comparison vid with those two razors. Here's the link - th-cam.com/video/GA1tX-_tOJg/w-d-xo.html Kevy 🙂
@@kevyshaves4109 Cool! I am watching all your vids from the beginning, but I have also watched a few ahead to learn things and see the awesome stores you have visited. 😊
DS cosmetic tuxedo fibres are indeed very crimped, compared with other tuxedo knots out there.
I prefer Yaqi synthetics but the DS flat top knots are amazing too!
nav m
I have several Yaqis and very happy with. I have fan shapes and like them as much as the bulbs. Never had a flat top though. Would you recommend rhem? Why? Are they better than fan shape?
@@Juraberg
Sorry for the late reply.
The flat top isn't better than a fan of bulb perse, however, they do give a very unique experience for sure.
They don't require any splay to generate lather and the face feel is very unique.
For these reasons, I highly recommend the flat tops.
@@Nav_M Thank you. Interesting thaughts. I will definitely consider buying one.
Hi Uncle very nice shave 😊 great Lather again , have a great weekend and stay smooth my friend😎
Thanks, you too! 🙂
Use a ceramic car polish on the 6S head once every few weeks. Works
Hello Kevy, Nice shave as always. I just fell in the rabbit hole and ordered the Rockwell 6C razor, lol.
I have been using the Razorock German 37 Slant, but the razor feels sometimes to be too aggressiv, specially if I have some nicks. Hopefully now I can change to the milder plate if needed.
I love the look from the finish from the 6S. Looks so good. But because of the money i bought the 6C. It's a very smooth shaver. And now i know the decision was good. 😉👍 Great shave. Thank you. Have a great week! Jens
Hi Jens. I think you made the right choice. Kevy 👍
@@kevyshaves4109 i have read that about the gliding from the first owners too. Many people have both and some said it. I think the 6C was a good choice and so i could save money.....
Hahahaha. Saving money...
Buying more soaps, oder Razors, blades, brushes... You know what i mean. 😉
I know EXACTLY what you mean! Lol 😂
@@kevyshaves4109 Kevy, sometimes i have the feeling you are my lost twin brother 😂😂😂
I just bought a Rockwell 6S from Ebay (Canada). 116 CAD.
Brilliant!! Enjoy it, it's a great razor. Kevy 😀👍
Would you say switching the plates from 6-4 helps with skin irritation and cuts for each pass?
Yes, definitely 👍
Been using a King C Gillette safety razor for awhile has done me well. And will be getting the Rockwell 6C before long. Just because of the Chrome Factor. Thanks for the video Kevy!
I own the 6C gun metal and it's a great razor.
I have extremely coarse hair with very sensitive skin and hair grows fast. Thus 5-7 days growth results in a full, heavy beard and the Rockwell R6 plate (with an assortment of blades) handles the beard with ease.
Constantly surprised at the volume of hair this razor can handle without getting clogged
You won't regret buying this piece of kit!
@@kcb8130 yea shaved with it last night. I used every plate to see which one I liked and plate 3 and 4 does does great for 3 day beard growth. I used plate 6 first and it felt rough but but didn't cut me to that's a winner lol
Finally I bought both, I do not know why..... I love it e Basta..... 💥
I also find the 6C glides a bit better but the 6S gives me a better shave.
I use R4 on the 6S and R6 on the 6C.
good shave Kevy
Thanks Chuck 😀👍
Great video , I would like 2 razors dedicated to different numbers at the same time .
I was wondering what the difference between the two safety razors is. All you have to do is watch Kevy's past videos.
Hey Kevy be careful if u are thinking about the Model T I canceled my order after waiting for 7 months since I first ordered the Model T back in May of 2018 before enduring endless B.S. up until Dec of 2018 Rockwell said that the first receiving date was in Aug of 18 then pushed back to Oct of 18 then possibly in Dec of 18 then further excuses of falling behind in production and closing down their shipping plant over Christmas and New Year after supposedly promising some people my self included that some orders would be received by the end of 18 but I wasn’t biting anymore on their BS so I got my refund and bought myself a Rex Ambassador and never looked back sure I paid more for my razor but no regrets. Enjoyed the video maybe the price on the Rex will drop one can only hope but feel sorry for all the other customers who are getting the shaft.
That's a shame to hear that about your wait for the Model T. Hopefully Rockwell will get things sorted out for the others who are still waiting. I'm going to get a Rex Ambassador later this year. I've tried one and they are excellent. Cheers. Kevy 😀👍
Good for u Kevy look forward to seeing u shave with the Rex cheers
Great shave comparison. I pondered for quite awhile on which to buy, he 6S or the 6C. I finally decided on the 6C for two reasons, price and looks. I'm old and shiny things catch my eye, LOL. I haven't tried the R5 or R6 plates yet. I'm going to try them changing plates as I change passes.
Thanks Claude. I think you made the right choice. Let me know what you think of the R5 & R6 plates when you use them. Cheers. Kevy 👍
@@kevyshaves4109 Okay, today I was feeling brave. I had a 3 day growth. Used my Rockwell 6C with the R6 plate (Polsilver 2nd use) for 3 full passes and pick up. WOW, that R6 plate mowed down the stubble on the first pass like a hot knife through butter. I could have stopped at 2 passes but was having fun. I got a little irritation, but not bad
Next up: 3 passes with the R5.
Today was the R5 plate. Had a great shave, 3 passes. Very minor irritation that was gone within the hour. So, my opinion, the R6 plate is too aggressive for me for 2 or 3 passes, but will definitely be used for 1st passes. The R5 plate was great and smooth with 3 full passes and pick up.
Great to hear that Claude. Thanks for letting me know. Have a great weekend. Kevy 😀👍
Nice one Kevy, I'm more than happy with my Gun metal 6C. What a waste of whisky! the only time whisky should be involved is as a post shave dram.
😂😂
Nice shave Kevy
"Squiggly" works for me 👍 Fantastic lather with that soap,and must be super slick to be able to touch-up with an aggressive razor on bare skin. I agree, it does smell wonderful.
Squiggly is a great word. I might try to get some real Scottish words into my vids! Twa plehn bridie's and an' ingin' ane an' a'! 😂😂
Love you Kevy, always great videos thanks mate
Cheers 👍
Bit late to the party here but great comparison nonetheless. I understand the 'smoother' shave with the high polish of the 6C but I prefer the stainless steel version...just because it's stainless steel.
Kevy, good job. Thank You for your service. How does the soap you grated Tabac and Mitchel perform? Can you show them shaving sometime? Best wishes Wojtek (Voytek)
It works great. I've used it in videos. Kevy 😀
Interesting save you prefer 6C?😀🤣but the 6S comes in so many colours six lifetimes I got the Gunmetal 6C
That soap is so slickery it makes that razor so glidey..Great shave, 6c seems like a great value for a quality product.
Yes! A new word for my brain...slickery! I love it! Cheers. Kevy 👍
After just under 2 years my 6c broke .. thread has worn out so cannot be tightened .. I have just purchased the 6s which being stainless not an alloy or chrome pkated will hopefully not suffer the same fate...
I'll keep my fingers crossed for you and your new 6S. Kevy 👍
what would u pick as a go too blade for sharpness and smoothness ..as of from today ..thank u great videos and super channel
Hi Tomas. My choices would be Polsilver Super Iridium, Feather and Gillette Nacet or Gillette Silver Blue. All excellent blades and very smooth to use. The Feather is the sharpest blade out there. Cheers. Kevy 😀👍
@@kevyshaves4109 thanks for advice
Seems like the 6S had more audible feedback?
Yes, I think it might be because it's a little bit heavier than the 6C.
Stainless steel has much better acoustic properties (vibration transfer). Because of that it's a top material for electric guitar bridges, much better than zinc alloys.
Hey men I just ordered this razed today but I don’t understand the 1 is the last aggressive but you start with 6 why everyone starts with the most aggressive?
I usually have a lot of growth to remove so I start on the most aggressive setting to take it down. Cheers. Kevy 😀
@@kevyshaves4109 aaah like that thx men
@@kevyshaves4109 hey men I just wanted to give you a update got it in the mail today and went straight for a shave started on 1 because in the box was a noted that said if you never shaved with a safety razor before start on 1 but it barley took any hair of so I went to 3 and that worked it feels so nice it a little difficult on the jawline but nothing to difficult with some practice It doesn’t pull like a cartridge razor the reason I bought it is because I got some in grown hairs on the neck I hope this razor will fix that
34C overnight leave the ducted Evaporative Air conditioning on as long as it’s not to humid. We had 43C one day last week and summer is just starting
Wow! I had to read that twice. I thought yiu were talking about the Merkur 34C!😂😂
your one of the most entertaining shaving channels. I don't know if I'm asking too much can you do a comparison review between the one blade and the supply company single edge injector razor? In your experience what's the top single edge razor?
Thanks. I've used the one blade but I only had it as I borrowed it from a friend to try it out. The Supply is a good razor too. My favourite SE razor is a Gem 1912. There's lots of vintage SE razors out there for great prices. Cheers. Kevy 👍
Nice video. I have the 6S, the model T and the Rex ambassador. I have to say the 6S is much much much better razor for me. I was thinking getting another 6S and have it recoated. I think I'll be selling all my Gellett Adjustable and all others. Just keep the 6S
Nice comparison on the two choices....~! Bottom line as a budget guy I have the 6c on my wish list ~! I would think the audio feed back is do to different vibration levels on the two different metal materials? My 316 grade Stainless Razorock Game Changer .84 is pretty quiet too . Great Job Kevy Kit
Cheers Kit 👍