+Jeremy Gordon This guy here is only commenting about his "REAL shield" and claiming ppl to be retarded... You know, Man At Arms creates fantasy weapons. Its not supposed to be flimsy and wobbly like this, in the movie it protects against explosions and doesn't give away when a friggin melon is thrown at it. Even the layers don't fit but bulge with poor fitment.
Why is it all that Jeremy Gordon can do is call people names just because they are commenting on how bad a job was done on this build. It's like he is taking it personally.
+tuulari well, he's right, a real shield WOULD wobble when hit, it disperses the impact. The point of this show is to make fantasy weapons/armor but with realistic function and technique. In my opinion, under those criteria, the shield turned out fine
Could you guys please remake this shield (not counting the smaller throwing variant) so it doesn't wobble so much when absorbing impact? You did a lot better with the Hylian Shield and this is a shield that's worth getting right a second time. Remake it so it's heavier and more neatly riveted. You should aim to make it so it can take a blow from the Mjolnir you made without denting or bending excessively.
That was the worse project you have ever made! Looked like someone in Preschool had a construction paper project and that's what they built. Buckles in the metal, not smooth, it is a Rector Set Shield. Some Assembly Required!
Cpt. America's shield is smooth. This had bows and layers of metal!? AIR could easily go through most of it which causes wind forces to act strangely upon on than a smooth shield. You can't throw this like a Frisbee?
From the looks of it I'd assume a multipart full metal shield like this needs a specialized armor smith to look really good. This has a distinct 'bladey' style. Then again, he says he's been an armor smith for a long time. Maybe he was lacking time and they needed the project done for airing on the show. Those things can happen, too.
Dowlphin He could a month to finish it and they film as they work I'm sure. THIS IS HIS IDEA of how it should be and it isn't the best idea I have seen them have.
Nunya Beeswax The reforged version is better. But I totally agree.. they threw an apple at it and the shield almost fell into 3 pieces. I'm pretty sure thats not a safe shield to bring into the warzone...
Not going to lie.. this one was pretty terrible. The shield looked rather flimsy, I don't think rivet was the best way to go. And you there seems to be bumps around the "rings", meaning they aren't exactly matching the shape of the shield below. Good attempt, but pretty terrible compared to all the other ones you make that are incredible.
yeah but they have their pride that thing looks like garbage... they could have done better... Also sapphire would have been a better gem to reference but they are the same... Aluminum oxide is sapphire which is one on the scale down from diamond...
The reason it was so bad is that they were given very short notice that they were doing this, so he wasn't able to prepare for it correctly. He has said if they let him know a month or two in advance, it would look much better.
The Brotherhood of Gaming.com All shields vibrate when struck. They are dissipating the energy delivered by the blow. This is how the shield would function in real life.
William Jefferson yeah but this is supposed to be captain america' s sheild. even a blow from a demigod didn't make it bend and mishape, let alone this much.
+rayjay6361 no it wasn't, the shield itself is very off model and is very flimsy looking. Even some of the parts they added dont fully fit you can see the holes in them
rayjay6361 bahaha thats hilarious, your grandson doesn't seem to have a keen eye for detail yet. if he rewatched the video when he was older he would defeintly notice it XD
This was their worst work really because this shield should have be made with a stronger and thicker metal and those extras on it looks aweful. I like their works but this one is not really good.
I HATE to say this, but this is definitely a fail. (The only one IMO) The metal piece of the shield. (The actual shield, and the colored metal plating) are not tight attached together but floppy and there are air-gaps. That's probably why this vid got so many negatives. And I agree. This wasn't good at all. I'm sure putting metal together tightly on a non-flat surface is hard, but from what u did in other vids, I'm sure you could have pulled this off.
I Actually think, that they didn't put as much effort into this one because they were going to smash it up in the end anyways... But maybe they smashed it up because it didn't turn out as well as planned and they wanted to get at least some good footage of that part. I am totally with you thaugh... I would have liked it way better if it would have just turned out as great as the rest of his amazing work. I wonder what went wrong in the process.
It was a JOKE if he used vibranium the shield would have came out ok instead of looking like its coming apart. Also Vibranium in the Marvel universe was created somewhere in the mid 1900's on accident by a scientist and was never recreated succesfully the closest knockoffs were wovlerines skeleton which was enhanced with a coating of it via injection as well as a few other heros. So honestly I know Vi doesn't exsist take the joke for what it is and move on.just like how captain america doesn't exsist or his shield but we still look for super heros in the modern day world and try to create new and diverse things.
Nice effort, but the shield looks like garbage, especially the rings. The colors are nice, but Cap's shield is one solid piece. That thing looks awful with the ripples, rings not sitting evenly, and a tacked on star. All it would take is a few solid blows for that thing to fly to pieces.
Andrew Case No. This is a battle worn shield: img3.wikia.nocookie.net/__cb20120505075640/marvelcinematicuniverse/images/8/86/Shield-Captain-America-Movie.jpg. The one made in the video is a flimsy joke. Sorry.
you can't (as far as I know) make a shield as thick as C.A.'s in just metal. Which is probably why all medieval shields were made out of wood with metal plating on them
Solus Darkcoat I think they can make it thicker. problem is that it will be super heavy...but why they made one of the coolest shields in the world look so pathetic?
Lord Piyush A quick google would answer that for you, but no, it isn't just vibranium, it is a mixture of both. In the movie I think they just say vibranium, though I can't remember, but that may be due to the X-Men and the fact that Fox has the rights for them. In the comics it is both.
I have watched several of these blacksmiths videos by this very same guy, and he's very very talented I admire and even want a lot of the things he's made. So my saying this is only directed towards this one project this is not very good it is too flimsy and just not all that impressive looking. Keep making more though I will never tire of seeing your creations.
i agree. this is the most disappointing one. it is still awesome, but compared to his other creations, this one hardly compares. i love this guy, though
I love how you always come out with high quality work, but this wasn't the greatest I admit. Perhaps the experience would help you plan out and improve this design in the future, Although your swordcrafting skills are second to none.
You should remake this one, Captain America is my all time favorite and it would be absolutely amazing to see a shield made with a lot of effort. My recommendation is to not use aluminum sheets if you were to end up redoing it and to make it one solid piece.
Cap's shield doesn't have those other layers its just one with the different colours one it plus it has to be curved an strong and not wobble all the time
This shield looks like *I* made it. Oh well you can't everything right. You still have alot of my respect for the effort you put into your work. A stronger metal and some paint would've done just fine. We're not that hard to please. :)
I know I'm not the only one who broke out laughing at the American national anthem playing over the close-ups of that crappy thing. It was just so fitting.
This is horrible and I've seen many awesome creations from you guys. I know you can do better. Give it another go and give Cap the respect he deserves please. #AWEme #WhateverItTakes
Well there were different steps he could have taken, but if you're working on a remotely restricted time scale taking those steps would be very difficult, not to mention the extra expense required in getting equipment that I doubt he has, considering the other videos.
I dunno. I'm thinking the way it bends a little is good, because if it was strong yet rigid, it would snap from a strong enough force. The way it absorbs impact rather that deflects completely is good for a long term shield I would've thought.
Remake it out of heavier and thicker material and ONE SOLID PIECE OF METAL PAINTED, much like the actual shield. Also, you should make The Winter Soldier's arm.
Wow! All the work that went in to make it curve. Although it's not as ideal as other shields in terms of the surface and layers but still, it's pretty awesome seeing how from the hammered rough surface it became really smoothed and curved
crap? well didn't you just heard that he made it in a way how you make a real functional shield......this CA shield he made can be used to block real sword blows....If you asked him to build a Hollywood prop crap then its not his line of work to do shits like that,his job is to make real things,real functional things.
he says he is making a functional shield, he is a blacksmith, but he makes props for sets in movies. that shield is made out of anodized aluminum. ONE surface is resilient as a ruby. to put that in comparison, a diamond is the hardest object known to man yet it can be shattered. yes, you are able to cut a diamond; that is how they get them on rings. That shield is a flimsy piece of crap.
He doesn't make crap props in these videos, he's known for making functional and nice looking replicas on his youtube videos, which this is functional, but not at all professional looking.
After actually looking up Frostmourne, yes, Frostmourne would be pretty awesome. Do Frostmourne! 4.bp.blogspot.com/_GcKGQGGpS1M/TQrJeJKzJEI/AAAAAAAACsY/SlhZ3iJdB4Y/s1600/Frostmourne08.jpg
"I've created weapons for over 200 feature films"
Not for Marvel by the looks of that shield.
please remake the shield it looks floppy and soft
I am floppy too:o
This shield looks budget
I support almost all of their work and defend them when some idiot says they don't do a good job, but my god, this is just a lazy attempt..
HEJ VEGETA VEGETA VEGETA VEGETA VEGETA VEGETA VEGETA
Gazi Qeriqi what? You peon.
I CAN FLY.
Gazi Qeriqi 金木 研 abridged reference XD
Gazi Qeriqi 金木 研 crap baskets.
Remake this shield to be accurate and practical.
Oof
Like they half assed this one 😂 love their other stuff though
Malisimo quedó
I was reading the comments and was like
"It can't be that bad"
Then I saw the end product....
same
+Jeremy Gordon This guy here is only commenting about his "REAL shield" and claiming ppl to be retarded... You know, Man At Arms creates fantasy weapons. Its not supposed to be flimsy and wobbly like this, in the movie it protects against explosions and doesn't give away when a friggin melon is thrown at it. Even the layers don't fit but bulge with poor fitment.
Why is it all that Jeremy Gordon can do is call people names just because they are commenting on how bad a job was done on this build. It's like he is taking it personally.
+molly presto hahahahaha
+tuulari well, he's right, a real shield WOULD wobble when hit, it disperses the impact. The point of this show is to make fantasy weapons/armor but with realistic function and technique. In my opinion, under those criteria, the shield turned out fine
Could you guys please remake this shield (not counting the smaller throwing variant) so it doesn't wobble so much when absorbing impact? You did a lot better with the Hylian Shield and this is a shield that's worth getting right a second time. Remake it so it's heavier and more neatly riveted. You should aim to make it so it can take a blow from the Mjolnir you made without denting or bending excessively.
+qurazy a different group of guys made the throwing shields and the hylian shield. That's the Reforged group, they do superior work.
+Itz A Mystery soooo, what's his excuse for not heat treating and using piss poor riveting on inferior metals. hmmmmmm?
Lol professional, I'm a professional burger flipper do you know what the word means?
+qurazy It's because in the movie it is one single piece of vibranium and is just painted, in this he has riveted several pieces together.
Shut Up :D
That was the worse project you have ever made! Looked like someone in Preschool had a construction paper project and that's what they built. Buckles in the metal, not smooth, it is a Rector Set Shield. Some Assembly Required!
Really? That'd be one badass Preschooler then...
Cpt. America's shield is smooth. This had bows and layers of metal!? AIR could easily go through most of it which causes wind forces to act strangely upon on than a smooth shield. You can't throw this like a Frisbee?
From the looks of it I'd assume a multipart full metal shield like this needs a specialized armor smith to look really good. This has a distinct 'bladey' style. Then again, he says he's been an armor smith for a long time. Maybe he was lacking time and they needed the project done for airing on the show. Those things can happen, too.
Dowlphin
He could a month to finish it and they film as they work I'm sure. THIS IS HIS IDEA of how it should be and it isn't the best idea I have seen them have.
Nunya Beeswax The reforged version is better. But I totally agree.. they threw an apple at it and the shield almost fell into 3 pieces. I'm pretty sure thats not a safe shield to bring into the warzone...
Amazing how John Walker made a better shield than Man at Arms
Not going to lie.. this one was pretty terrible. The shield looked rather flimsy, I don't think rivet was the best way to go. And you there seems to be bumps around the "rings", meaning they aren't exactly matching the shape of the shield below. Good attempt, but pretty terrible compared to all the other ones you make that are incredible.
Captain America would die if he had to take this shield into combat.
he wouldn't be able too it would break and flop in his hands
They're sword smiths dude. So i guess you could say this is out of their comfort zone. Be grateful they even made it in the first place.
yeah but they have their pride that thing looks like garbage... they could have done better... Also sapphire would have been a better gem to reference but they are the same... Aluminum oxide is sapphire which is one on the scale down from diamond...
The reason it was so bad is that they were given very short notice that they were doing this, so he wasn't able to prepare for it correctly. He has said if they let him know a month or two in advance, it would look much better.
They Needed to make it from one piece
i dont think the shield is supposed to be bendable and easily misshapen when used. you guys do SO much better then this..
If it was too rigid it would snap under pressure and would be virtually useless.
but when about when they made the Zelda shield, that thing was hella solid and withstood more than this did
The Brotherhood of Gaming.com All shields vibrate when struck. They are dissipating the energy delivered by the blow. This is how the shield would function in real life.
William Jefferson yeah but this is supposed to be captain america' s sheild.
even a blow from a demigod didn't make it bend and mishape, let alone this much.
ntdonat Yep, they should have used that extra adamantium in the back room.
Sorry guys but this time, not even close... horrible shield
that was awsome
+rayjay6361 no it wasn't, the shield itself is very off model and is very flimsy looking. Even some of the parts they added dont fully fit you can see the holes in them
rayjay6361 bahaha thats hilarious, your grandson doesn't seem to have a keen eye for detail yet. if he rewatched the video when he was older he would defeintly notice it XD
jensennguyen02
Yup
Remake this shield......please.... it's not a good result .
I agree fully
No need to be harmful with words, dude. It's supposed to be only a statement.. x Chill please
Pablo Sebastian Parra Manrique I agree
Pablo Sebastian Parra Manrique I really hope they start making Leonardo's pair of katanas?
true
this is by far their worst creation to date.
... this was made 3 years ago
and still. how they did it is "bad". although i love man at arms and watched every video, the "how" he did it is horrable
yes i know but 3 years ago they didn't have as much experience
Just go to Indy mogul's backyard FX instead it's literally the same thing but cheaper and you can do it at home.
That is true! i love that build!
To be completely honest this shield looks terrible
+Jeremy Gordon We dont want a real shield, we wanted the fiction shield
+Cynical dude at this moment i am checking this lame shield the other one is another story, ignorant
+Cynical the hylian shield looked good. What happened to this one? Didn't the other guys make the Hylian? I like their shows better, I think.
+Austin Davis you think you could do better?
everyone just shut up these guys did this for your sake and you hate on them? wow. so rude. :|
This was their worst work really because this shield should have be made with a stronger and thicker metal and those extras on it looks aweful. I like their works but this one is not really good.
They should have machined it out of plate with a 5-axis mill.
I HATE to say this, but this is definitely a fail. (The only one IMO) The metal piece of the shield. (The actual shield, and the colored metal plating) are not tight attached together but floppy and there are air-gaps. That's probably why this vid got so many negatives. And I agree. This wasn't good at all. I'm sure putting metal together tightly on a non-flat surface is hard, but from what u did in other vids, I'm sure you could have pulled this off.
I Actually think, that they didn't put as much effort into this one because they were going to smash it up in the end anyways... But maybe they smashed it up because it didn't turn out as well as planned and they wanted to get at least some good footage of that part.
I am totally with you thaugh... I would have liked it way better if it would have just turned out as great as the rest of his amazing work. I wonder what went wrong in the process.
Should have used vibranium.
bullshit. that material doesn't even exist!
It was a JOKE if he used vibranium the shield would have came out ok instead of looking like its coming apart. Also Vibranium in the Marvel universe was created somewhere in the mid 1900's on accident by a scientist and was never recreated succesfully the closest knockoffs were wovlerines skeleton which was enhanced with a coating of it via injection as well as a few other heros. So honestly I know Vi doesn't exsist take the joke for what it is and move on.just like how captain america doesn't exsist or his shield but we still look for super heros in the modern day world and try to create new and diverse things.
oh ok i guess you dont take my sarcastic side either
1:12 Ok there it is, it's done, thank you =D
“Mom can we have Man At Arms”
Mom: “We have Man At Arms at home.”
Man At Arms at home: 3:55
A Bart Simpson meme "Atleast you tried" is so damn appropriate here. lol
Captain America's shield... made in China.
Hi-larious
Sorry (hi for my bad English)
+DaemoniumCC nu Made in wakanda
+RedArrow 54 by ACME
冒牌货 lol so you're the idiot trying to troll my channel. Why are you being a racist piece of shit?
This would've made sense had it been posted on April 1st.
shots fired
+Josh Valenz lmfao I'm saying he burned him. How is that being triggered?
That's the date I'm posting!
0
AwesomeGuy
Nice effort, but the shield looks like garbage, especially the rings. The colors are nice, but Cap's shield is one solid piece. That thing looks awful with the ripples, rings not sitting evenly, and a tacked on star. All it would take is a few solid blows for that thing to fly to pieces.
It's supposed to look like that, not gonna make a new looking shield, it's battleworn
Andrew Case No. This is a battle worn shield: img3.wikia.nocookie.net/__cb20120505075640/marvelcinematicuniverse/images/8/86/Shield-Captain-America-Movie.jpg. The one made in the video is a flimsy joke. Sorry.
That's a battleworn prop :P
Yea I was expecting better from them especially after watching the video for the bleach sword they did
I was hoping for them to shoot it :(
You could of done a LOT better job on this.
John *have
very funny, you guys almost had me!!.... where is the video of the real shield you guys made?
I know, everybody's a critic, but the Hylian Shield was better.
Isaías Sosa *Hylian shield
Alright, my damn autocorrect will learn the proper spelling.
I totally agree with you
Isaías Sosa nj tdl bvd0
A really great effort. An extremely difficult build.
I'm guessing that John Walker watched this tutorial for his new shield
I was looking for this comment, good job being quick my guy
Haha there it is
Ironically John Walker’s shield looks so much better than this one.
@@Harryacorn2 exactly what I was gonna say lol
well that's a piece of shit....
Shut up
you can't (as far as I know) make a shield as thick as C.A.'s in just metal. Which is probably why all medieval shields were made out of wood with metal plating on them
Solus Darkcoat I think they can make it thicker. problem is that it will be super heavy...but why they made one of the coolest shields in the world look so pathetic?
ToxicTV tru dat!
ToxicTV Shut up
You should make Iron Mans Armour.
thumbs up if you agree!
***** no....the US military will probably buy it and mark it as classified :P
Really? No wonder you're in the Army, you're a fucking idiot.
*****
Just the ARMY. I'm Navy, So you're all stupid as fuck to me.
You can hear them laughing right before the big reveal about how bad it is. Jesus.
this is why I love ilya more :)
the simple shield he made at the beginning and some paint would have been perfect.
Yeah I think he got some bad Info, it's always been a single piece shield
Shouldve used Adamantium
Vibranium does better.
dude the one in comics is made with vibra , not ada , ada is more like logan and ultron stuff 😂
I know its a joke
branden neves umm really ? i thought it was just made of vibranium
Lord Piyush A quick google would answer that for you, but no, it isn't just vibranium, it is a mixture of both. In the movie I think they just say vibranium, though I can't remember, but that may be due to the X-Men and the fact that Fox has the rights for them. In the comics it is both.
this is so far the worst weapon
you guys made... it just looks like
its been made from cardboard
+Imran Haque Not even cardboard is that, *cough*, wibbley wobbley.
sorry about the comment before. But yeah
that was some terrible shield.
Whats wrong with your last comment? Lol, nothings wrong with it, its fine!
i was supposed to comment the previous comment to someone else but luckily you didn't receive it.
Lol
this is why this guy doesn't do this anymore
I have watched several of these blacksmiths videos by this very same guy, and he's very very talented I admire and even want a lot of the things he's made. So my saying this is only directed towards this one project this is not very good it is too flimsy and just not all that impressive looking. Keep making more though I will never tire of seeing your creations.
i agree. this is the most disappointing one. it is still awesome, but compared to his other creations, this one hardly compares. i love this guy, though
I love how you always come out with high quality work, but this wasn't the greatest I admit. Perhaps the experience would help you plan out and improve this design in the future, Although your swordcrafting skills are second to none.
agree with that...
We all have those bad days.
Me: Mom can we get a Captain America shield
Mom: No we have a shield at home
Shield at home:
Make an Attack on titan sword, those are awesome
Don't know if you've seen it yet, but they did a video for it already.
Sheahazza Could you send me a link? I couldn't find it
yes plz
/watch?v=OD5vX4yW04c here you go
Yes Please, it looks different from other regular swords
I think he could've made it a little better then that
yeah
Plz don't hate they tried :p
+joyauri out of all the mean comments you reply to some criticism that has no insults telling the guy not to hate
Josue Mederos n
worst thing they made ever
let's see you do better 😂
+Lapis pig Considering he could hardly do WORSE, that shouldn't be a problem.
+Lapis pig already did
+pearlie mijares Surrrreeee you did -_-
you really think somebody with no experience in welding wouldnt do worst than professionals? are you 5?
You should remake this one, Captain America is my all time favorite and it would be absolutely amazing to see a shield made with a lot of effort. My recommendation is to not use aluminum sheets if you were to end up redoing it and to make it one solid piece.
Remake this please...
Your right
#remakecaptashield
+NoNameImagination plz remake this giys
+NoNameImagination plz remake this giys
Remake it.. Please...
Cap's shield doesn't have those other layers its just one with the different colours one it plus it has to be curved an strong and not wobble all the time
+Arkham Knight 1998 Caps shield is also you know, FAKE.
***** i know but they could have looked at the design from the movie which in this video they didn't look hard enough
+Arkham Knight 1998 I know the shield in captain America is painted and made out o strong metal
+Jase Westbrook his shield was made by a fiction metal called vibranium
It wobbles cus it's not a fucking vibranium
Dis one looks bad.
Really? They made a big paper plate?! We need a cap shield redo episode. I still love MAA's work.
still not vibranium
yep
+nonthapat keawampon It vibrates plenty, though :)
+Mark The Gr8 lmao
+Mark The Gr8 lol
vibranium acually doesnt exist !!!!!
I thought you guys were exaggerating, but that really does look like shit.
+spartanB0292 ikr it looks like a piece of shit
hahahaha
yeah look like dump shit
it kinda does bit if you wanna talk shit then make a better won
Keondre Wiggins I'm not joking when I say I think I really can make a better looking one.
This shield looks like *I* made it. Oh well you can't everything right. You still have alot of my respect for the effort you put into your work. A stronger metal and some paint would've done just fine. We're not that hard to please. :)
Well he wants to do a good job still I would want to try my best even if I didn't need to
Maybe he could've got a thicker steel and make a dent and paint it
John walker after seeing this:
I think it would look better if it made out of a solid metal
yes. it looks like made of cardboard. it moves a lot
Rebellion DMC
4:30 When you procrastinate and turn in a half-finished assignment
This is what John Walker watched
I know I'm not the only one who broke out laughing at the American national anthem playing over the close-ups of that crappy thing. It was just so fitting.
Captain America would die on battlefield using this shield
Atleast it protects you from headless arrows.
This is horrible and I've seen many awesome creations from you guys. I know you can do better. Give it another go and give Cap the respect he deserves please.
#AWEme
#WhateverItTakes
Its great but you should have made it a couple inches thicker and fixed those flaps
if it was couple inches thicker you could't even carry it anymore.
***** i think they should use a other type of metal which is more durable and stronger
It had bumps all over the place
video of you doing a better job...
those cosplay shields made from those dome sleds are waaaayyy better
This video was made 6 years ago and somehow people are still complaining about the shield
Truly timeless
This just goes to show how unrealistic that shielddesign is. Not properly executable in real life.
***** he did not talk about the shield in the comic... he talked about the real making of a shield...
Well there were different steps he could have taken, but if you're working on a remotely restricted time scale taking those steps would be very difficult, not to mention the extra expense required in getting equipment that I doubt he has, considering the other videos.
Looks like something Sylvester the cat throws out of the trash can right before he finds a fishbone .
I have a question. What happens to it if you hit it with Mjölnir? Will it bend?
New series,
"Will it bend?'
That happens in the Avengers and apparently they cancel each other out.
kellogs123100 That's why I asked! I want them to test this one with Mjölnir they made!
Ahh I see.. that would be epic!!
kellogs123100 Except that wouldn't actually happen.... lmao
just here after a long time only to read comments.
I know that its hard to make this shield if you dont make it perfect like the swords but this is to bad :( i thought you would make it stronger
Agreed
can you make Dante's Scythe, from Dante's Inferno?
can you make it uglier than that?
high five LOL
Don't jinx it
I can't believe they made this Hyrule shield more badass than that.
Worst piece yet
it may be true, but its very functional
ya C.A is one of my favorite marvels but your right this shield is kinda sloppy but hey not easy to make
I have to admit, it didn't really have a smooth finish
I dunno. I'm thinking the way it bends a little is good, because if it was strong yet rigid, it would snap from a strong enough force. The way it absorbs impact rather that deflects completely is good for a long term shield I would've thought.
***** too bad vibranium isn't fucking real and he's using materials that yes, would have to bend to absorb a blow.
next thing make iron man suit
That is the shittiest looking shield ever. I can find more believable ones at a random comic convention. Jesus.
can you make zabuza's sword from Naruto
Ra's Al Ghul's Sword from Batman Arkham City.
You should give this shield another try. Get rid of the seems. Do not care about the weight. You can do it. I belive in you ;)
Make Trunks' sword from Dragonball Z
John Walker watched
The shield in the movie looked like a single piece that had been scored and painted though. Wouldn't that have been better?
Remake it out of heavier and thicker material and ONE SOLID PIECE OF METAL PAINTED, much like the actual shield. Also, you should make The Winter Soldier's arm.
no offense but this looks like something i would make in 1st grade with all those parts sticking out.
Wow! All the work that went in to make it curve. Although it's not as ideal as other shields in terms of the surface and layers but still, it's pretty awesome seeing how from the hammered rough surface it became really smoothed and curved
I'm sorry to say it but other than everything else he has made, this shield looks really bad and tacky
true
well how much can you do with a circle of metal
It looks unfinished
looks like i made it lmao
Motha Goose you look unfinished
crap? well didn't you just heard that he made it in a way how you make a real functional shield......this CA shield he made can be used to block real sword blows....If you asked him to build a Hollywood prop crap then its not his line of work to do shits like that,his job is to make real things,real functional things.
Derp he makes props for films he says it in every single video
he says he is making a functional shield, he is a blacksmith, but he makes props for sets in movies.
that shield is made out of anodized aluminum. ONE surface is resilient as a ruby. to put that in comparison, a diamond is the hardest object known to man yet it can be shattered. yes, you are able to cut a diamond; that is how they get them on rings. That shield is a flimsy piece of crap.
Jingwei Zhou lol you called him derp, dats funny muahahaha
He doesn't make crap props in these videos, he's known for making functional and nice looking replicas on his youtube videos, which this is functional, but not at all professional looking.
***** Ya, because horrible grammar hides the fact that this shield sucked. Your a dumb ass, Hamza Rasol.
thats captains shield in version 0000000000000.1
***** yeah xD
+Kevin Lopes or -100000000000.1
Guys, it's time to make another shield....you guys made this one over 4 years ago....can't wait to see what you can do in 2017
... Probably shouldn't have done this one.
REMAKE THIS SHIELD. IT IS NOT HARD LIKE METAL. IT IS SO FLEXIBLE AND IT LOOKS NOT REAL. REMAKE THE SHIELD LOOKING LIKE REALISTIC
Why nobody asks for Frostmourne?
After actually looking up Frostmourne, yes, Frostmourne would be pretty awesome.
Do Frostmourne!
4.bp.blogspot.com/_GcKGQGGpS1M/TQrJeJKzJEI/AAAAAAAACsY/SlhZ3iJdB4Y/s1600/Frostmourne08.jpg
That was the first weapon I thought of! I had to check the comments to see if anyone had thought of it yet.
Do FROSTMOURNE!!
Must be a shield for Captain Puerto Rico 😂😂
PLEASE CRAFT SOUL EDGE OR SOUL CALIBUR FROM SOUL CALIBUR SERIES
oh god pls let me buy that 0-0!!!
Screw that, I want an Ivy Sword.
verdatum That's amazing too,but Soul Edge...oh Soul Edge...it is,it is..FANTASTIC!
Yes plz
Soul/Maka's scythe from Soul Eater.
OhMyGosh yes! :)
That's not captain america's shield, his is made from vibranium and adamatium.
O you mean the two fictional metals?
Yeah
I'm being sarcastic obviously they can't make the actual shield with two made up metals, Jesus!
Yep
viberanium in the movies but adamantium in the comics. marvel cant say adamantium because fox owns the rights for this metal.
I've seen enough of these guys to know that they should try again.
Can you make a new shield but something thats not complete trash
Good but not perfect!!!
This one looks a bit awkward, and it's too flexible.
by the end of the stress tests, that thing is majorly bent out of shape...