Very nice, I have the same display and it came with no instructions or support. Can you describe hookups and screen settings for the rasberry pi and volumio. Any help would be appreciated.
Wonderful Project. Which Case do you buy for this project? On Aliexpress, i can find a lot of wisecco 14 widescreen. Which specification must the display have?
Congratulations for the wonderful work!! for me,newbie,It will be awesome if you coluld explain by a step by step guide to buy parts , assemble and configure. May i hope??
Check this out. 1. Raspberry PI4B. Ram 2GB 2. Power Supply. www.aliexpress.com/item/1005002126844156.html?spm=a2g0o.order_list.order_list_main.5.6db918024yJ0Xd 3. Display. www.aliexpress.com/item/1005002364481652.html?spm=a2g0o.order_list.order_list_main.19.21ef1802opkCRZ 4. Install Volume on Raspberry PI For configuration , I will write article on Medium soon.
@@K.Ax0y It us completely possible, it might be a tad less responsive, the pi 4b is faster, but you are not doing anything super complicated and it will definitely work
@@DIYAudioLover Thank You!, can I ask you for a link to the diy allu case? specifically the model where you're looking for the big display. I found some 430mm x 120mm but it has a smaller internal space because the sides are designed as passive aluminum coolers for the amplifier.
hi, that is a really nice setup you have for a media player, would it be possible to have a complete rundown of the full components you used besides the screen and power supply please. looking at it the whole design is very sleek so im guessing it is a custom case (if your able to give the name of the supplier or website to source), also did you use any pi related amps?
I thought the Wisecoco is a 1920x550 screen. i have the same size, from Lesown, and its 1920x550. BTW Im doing exactly the same :) but with additional 8ch DSP build it, and IF I find space, with 8ch of amplification too.
I am not sure I understand your question correctly. It's a DIY streaming player with the following configuration Hardware: Raspberry PI 4B Ram 2GB OS: Volumio 3.198 Display: wisecoco 14 inches touch display Extended Plugin : Now Playing , Peppy Meter
@@drbouzas there are plenty of chassis from AliExpress for example -->www.aliexpress.com/item/32273251950.html?spm=a2g0o.detail.1000014.6.c491dBXxdBXxjl&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.281175.0&scm_id=1007.40050.281175.0&scm-url=1007.40050.281175.0&pvid=9becf0cc-0afb-4b45-be01-e6c2534f648c&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.281175.0,pvid:9becf0cc-0afb-4b45-be01-e6c2534f648c,tpp_buckets:668%232846%238107%231934&pdp_npi=3%40dis%21THB%212180.81%211766.39%21%21%21%21%21%402103010b16888119456553914edf1d%2150182450755%21rec%21TH%212021265592
Ну вот молодец. Ну прям красавец.👏
С такой любовью, для себя.
Thanks
Very nice, I have the same display and it came with no instructions or support.
Can you describe hookups and screen settings for the rasberry pi and volumio.
Any help would be appreciated.
You can follow how to build link that I provided at the bottom
Wonderful Project. Which Case do you buy for this project?
On Aliexpress, i can find a lot of wisecco 14 widescreen. Which specification must the display have?
Awesome project. Respect. Greetz from Germany
Thank you
Congratulations for the wonderful work!! for me,newbie,It will be awesome if you coluld explain by a step by step guide to buy parts , assemble and configure.
May i hope??
Check this out.
1. Raspberry PI4B. Ram 2GB
2. Power Supply. www.aliexpress.com/item/1005002126844156.html?spm=a2g0o.order_list.order_list_main.5.6db918024yJ0Xd
3. Display. www.aliexpress.com/item/1005002364481652.html?spm=a2g0o.order_list.order_list_main.19.21ef1802opkCRZ
4. Install Volume on Raspberry PI
For configuration , I will write article on Medium soon.
is it possible to do with raspberry 3b+
@@K.Ax0y It us completely possible, it might be a tad less responsive, the pi 4b is faster, but you are not doing anything super complicated and it will definitely work
Where did you make the case? And does the screen work with Volumio as is or are some tweaks required?
I bought case from China and sent it to factory for CNC. The screen work right away with Volumuio
@pspracha1
How much all the parts needed (Rap4+display+case) ?
Thanks for let me know.
I already left "how to build" link in description.
touch a bit slow?
It’s running off a local host server - so basically displaying a webapp or website embedded into the touchscreen. 👍🙏
Can you please share the link where yo buy this screen?
You can follow how to build link . It explains everything.
@@DIYAudioLover what is the brand of the screen and where to buy. Thanks
very nice project! I would like to use the same display for picore player. Do you know if the picore player will work with 2560*720 resolution ?
I'm not sure . As far as I know , picore doesn’t support ultra wide display. The alternative solution would be dietpi.
@@DIYAudioLover Thank You!,
can I ask you for a link to the diy allu case?
specifically the model where you're looking for the big display. I found some 430mm x 120mm but it has a smaller internal space because the sides are designed as passive aluminum coolers for the amplifier.
hi, that is a really nice setup you have for a media player, would it be possible to have a complete rundown of the full components you used besides the screen and power supply please. looking at it the whole design is very sleek so im guessing it is a custom case (if your able to give the name of the supplier or website to source), also did you use any pi related amps?
Thank you . Well , I will write another story for "How to build". medium.com/@pspracha/this-is-how-i-assemble-music-streaming-player-b413afa9aa41
@@DIYAudioLover i appreciate the reply, i will look at that link you supplied and look forward to the "how to build" that follows!
@@DIYAudioLover I’ve checked out your article but it didn’t have any info on the case/chassis ?
link where to buy your touch screen?
check AliExpress and search for HDMI touch screen.
How did you make it work with a ultrawide display ?
just set the screen resolution to 1280x400 in config.txt
@@DIYAudioLover Does volumio come with a config file when i flash it? or how do i get to that?
Once flash volumio you can edit config.txt in flash card.
This will only work with the screen I am using which is HDMI interface
hdmi_group=2
hdmi_mode=87
hdmi_cvt 1280 400 60 3 0 0 0
@@DIYAudioLoverwith this configuration, the display Is working 1/4 its native resolution. Did you tried to force at native resolution?
Have u tried 3.5 inch waveshare GPIO connection smallest streamer Bro??
I have another device built using 3.5 inches . I think it might be compatible with waveshare. Check this out th-cam.com/video/5UJJ-ZbEGoo/w-d-xo.html
That lo
oks great ! Do you build the chassis by yourself ?
I ordered chassis from aliexpress and sent it to CNC locally.
I thought the Wisecoco is a 1920x550 screen. i have the same size, from Lesown, and its 1920x550. BTW Im doing exactly the same :) but with additional 8ch DSP build it, and IF I find space, with 8ch of amplification too.
I think my display resolution is 3840x1100
What os did you used?
Volumio for Raspberry PI
hello it's beautifulll !! what is the reference of your vivaldi box? Thanks a lot
I am not sure I understand your question correctly. It's a DIY streaming player with the following configuration
Hardware: Raspberry PI 4B Ram 2GB
OS: Volumio 3.198
Display: wisecoco 14 inches touch display
Extended Plugin : Now Playing , Peppy Meter
The album scrolling is not very smooth, some latency 🤔 that realy would drive me crazy 😬😅
Yes. I also try dietPI which is a lot faster.
How is the resolution?
1280x400
@@DIYAudioLover What type of screen do you have?
@@Bates147 wisecoco 14 inches touch display
Hi. How do i get one of those?
This is my DIY project. you can probably build it by yourself
Very good! Yes a making video would be the best!
I will try.
Too complex for me to build 😮😢 but that's a very nice and clean streamer.
Thanks
If I'd use RPi3 in similar setup will it work OK in your opinion? I'm not going to watch videos only hires audio
Yes it should work with RPi3
@@DIYAudioLover Thanks!
Will you build and sell?
I just build for my hobby
Very nice.
If u could make a making video, That'll be more informative.
Expecting soon.
I am not good at making video. Anyway , I already created instruction in Medium. The link is in description.
Resolution settings please
1280x400
Это самоделка? Если да, крутяк.
Thanks
Great creation!
Where did you buy the casing?
I ordered from China.
@@DIYAudioLover OK, but where, on which page, do you have the link? kit is amazing
@@drbouzas there are plenty of chassis from AliExpress for example -->www.aliexpress.com/item/32273251950.html?spm=a2g0o.detail.1000014.6.c491dBXxdBXxjl&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.40050.281175.0&scm_id=1007.40050.281175.0&scm-url=1007.40050.281175.0&pvid=9becf0cc-0afb-4b45-be01-e6c2534f648c&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.40050.281175.0,pvid:9becf0cc-0afb-4b45-be01-e6c2534f648c,tpp_buckets:668%232846%238107%231934&pdp_npi=3%40dis%21THB%212180.81%211766.39%21%21%21%21%21%402103010b16888119456553914edf1d%2150182450755%21rec%21TH%212021265592