03 Suburban Neutral Safety Switch Adjustment

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ม.ค. 2025
  • Since we replaced the neutral safety switch when we rebuilt the transmission, it is now slightly out of adjustment. Let's adjust it to make it right.

ความคิดเห็น • 61

  • @ChillingwithMalc
    @ChillingwithMalc 4 ปีที่แล้ว +14

    Finally a neutral safety switch video that talks about the "indicator line" under the PRND321. Had this problem after changing a trans in a TAHOE. Thanks! Just solved my problem.

  • @youngbuckrefrigeration716
    @youngbuckrefrigeration716 ปีที่แล้ว +2

    Used my superchip to check trans position indicates in 2nd causing no start. I replaced safety neutral with one from local auto parts stills indicating in 2nd. Made sure lever forward checked cable truck in park just indicate in second!

  • @thatohiofamm
    @thatohiofamm ปีที่แล้ว +2

    I got this problem with mine but between park and reverse im gonna try counter clock wise and see if this fixes it. Sometimes it wont start this maybe the reason i hope

  • @josemarquez5281
    @josemarquez5281 2 ปีที่แล้ว +5

    The key is when you change the tranny and put the new one or the repaired one , you need to install it back with fiscally in neutral before you put the neutral safety switch so, you will have a very good adjustment at once

  • @pnwc6980
    @pnwc6980 3 ปีที่แล้ว +1

    I have a 2013 c6 and just got my headers replaced i think something hit the switch goes into drive but the shifter moves free between neutral and drive. Parks just fine. Was kind of hard to put it in reserve had to get the shifter in the correct position

  • @mikedzingle9838
    @mikedzingle9838 4 หลายเดือนก่อน

    Mine is not reading park it reads all the others but then also gets stuck in park. I replaced the natural safty switch and shifter sylnoid, and nothing gets it out of park

  • @LuisHerrera-lg2ch
    @LuisHerrera-lg2ch 5 ปีที่แล้ว +4

    Hey need some help figuring out why I can drop my shift lever down through all gears and drive but it wont shift back up to park or any gear above the one its on

    • @danielcroft3923
      @danielcroft3923 8 หลายเดือนก่อน

      It's a 2 part cable check where it comes thru the floor the connection between the cables is there it's also an adjustment point

  • @Pitch_Black_purge
    @Pitch_Black_purge 7 หลายเดือนก่อน +1

    Need help my 05 suburban isnt registrating no gears at all but its still shifting but not starting

    • @snutmeez
      @snutmeez 5 หลายเดือนก่อน

      My 2003 Grand Prix is doing the same. I'm going to take the nut off of the selector on the transmission, unbolt the *neutral safety switch*, and take it off. Back in the car, put shifter in Neutral, then put the *neutral safety switch* to the N, then plug it back in, then put it on the transmission, and bolt it down , and then put it in park, and try starting it. Doin this in the mornin, let you know what happens.

  • @michaelberger6255
    @michaelberger6255 4 ปีที่แล้ว +2

    Hey I recently replaced the rear main seal on my 05 Tahoe after reinstalling it all I bought a new safety neutral switch Iinstalled in with the trans in neutral and now On my instrument cluster the bar that shows up to let u know what gear you are in only shows up in reverse d321 doesn’t show up in park or neutral and it’s ticking me off I’ve tried adjusting the safety switch and it doesn’t help without it showing the bar in park the computer won’t allow the doors to unlock or turn the day time running lights off can u help?

    • @mjmcomputers
      @mjmcomputers  4 ปีที่แล้ว +1

      When it shows up in reverse, is it actually in reverse?

    • @michaelberger6255
      @michaelberger6255 4 ปีที่แล้ว +1

      Yes when I put it in reverse it goes into reverse and the indicator shows on the instrument panel I’m stumped about why it isn’t working when I replaced the rear seal it didn’t work properly so I adjust it and was able to get it to show up but then it went away so I bought a new switch and have adjust it as well and still isn’t working

  • @drew856856
    @drew856856 6 ปีที่แล้ว +4

    i think its sopose to be in neutral before you start the adjustment then there is a line on the switch that you line it up to. well thats how the f250s are.

    • @mjmcomputers
      @mjmcomputers  6 ปีที่แล้ว +1

      I don’t think there is a line on this one.

    • @Irish4u2nv
      @Irish4u2nv 5 ปีที่แล้ว

      @@mjmcomputers do I need to adjust full clockwise when its not going into park fully without having to let it roll on an incline sometimes to achieve full park recognition so it will restart or turn of power to radio when doors open?

    • @markofachampion3717
      @markofachampion3717 5 ปีที่แล้ว

      @@Irish4u2nv You're a waste of time. That is your destiny.

    • @Irish4u2nv
      @Irish4u2nv 5 ปีที่แล้ว +4

      @@markofachampion3717 your a super troll, beta male, soy boy snowflake that has no destiny! Wow, what a pitiful person to just be keyboard warrior and type that randomly comment to someone you don't know at all, smh pretty sure your a non existing person now or might as well be in the worlds eye! (Mark of a busta is more like it)

    • @Irish4u2nv
      @Irish4u2nv 5 ปีที่แล้ว +3

      @@markofachampion3717 just gonna block this troll for good, I'm sure this is his thing!

  • @jasonbrown467
    @jasonbrown467 3 ปีที่แล้ว

    what if i have a hard time with park? i have the trailblazer 4l60e and it shifts through all the gears with the stick reverse through first, but the display and all the relay clicks tells me it doesnt like to go to park or come out of it.
    i tore all this stuff apart so i can quickly over ride it, but i want to properly diagnose the issue.
    i just installed a new motor my self into this about 2 weeks ago, but it had been sitting for about 2 years prior to that.
    about 4 years ago i had the transmission out so i could but a new pump and torque converter in. maybe i didnt get the neutral safety switch turned just right? but i dont remember having this issue, but then again, maybe i did?

    • @mjmcomputers
      @mjmcomputers  3 ปีที่แล้ว +1

      Shift cable may be out of adjustment.

  • @bradcarr8021
    @bradcarr8021 2 ปีที่แล้ว

    What do I do if my transmission shifts gears but it doesn't engage the gears only when I first started it will go into reverse or drive for like 5 seconds and then it goes back into neutral even if the shift is in drive

    • @mjmcomputers
      @mjmcomputers  2 ปีที่แล้ว

      Sounds like a internal failure.

    • @pws3878
      @pws3878 2 ปีที่แล้ว

      Or it doesn't have enough xmission fluid in it.

    • @JediShilts
      @JediShilts ปีที่แล้ว

      I'm having this issue 2007 Silverado I'm certain the trans ain't smoked ..what did you figure out on yourz?

  • @parales03
    @parales03 6 ปีที่แล้ว +3

    Will this help with my reverse back up lights not engaging?

    • @mjmcomputers
      @mjmcomputers  6 ปีที่แล้ว +1

      It’s one of the first things I’d check besides bulbs and fuse if mine weren’t looking.

    • @checogonzalez9816
      @checogonzalez9816 4 ปีที่แล้ว +1

      Yes it will, I got some bright LED reverse lights for my 03 Chevy Silverado but they wouldn’t turn on. We checked the fuses & wires & everything was good. Then I found out I had to change my neutral reverse safety switch so they can turn on.

  • @zu1502
    @zu1502 11 หลายเดือนก่อน

    Is a range sensor and neutral safety switch the same ?

  • @LuaLuciano01
    @LuaLuciano01 2 ปีที่แล้ว

    Anyone help me out, I have a 04 gmc & I just replaced mine but now my truck revs at a high rpm 3k at 60mph & not sure why but it only happened whenever I replaced my neutral Saftey switch

    • @mjmcomputers
      @mjmcomputers  2 ปีที่แล้ว

      I don’t see how that would affect the idle.

  • @jrarnold9071
    @jrarnold9071 3 ปีที่แล้ว

    Hey need help replaced switch truck want go in reverse when put shifter in reverse it goes forward

    • @mjmcomputers
      @mjmcomputers  3 ปีที่แล้ว

      Sounds like the shifter itself is out of adjustment.

  • @andrewallen8764
    @andrewallen8764 2 ปีที่แล้ว

    My Silverado starts in the Park & Neutral positions. The gear shift inside is lined up on the different gears but the transmission won't shift into any gear? Is that the shift cable or the Neutral safety switch?

    • @mjmcomputers
      @mjmcomputers  2 ปีที่แล้ว

      You will need to verify if the shift lever on the transmission is moving. If not it sounds like the cable.

    • @JediShilts
      @JediShilts ปีที่แล้ว

      What was the outcome? Patiently waiting

  • @mikeb3263
    @mikeb3263 5 ปีที่แล้ว

    Mine does that but its confused between all of them except drive. Thinks its in Neutral for a little while even though I am in reverse. Then it moves over to reverse. Park does not show up except when I first start it. The 1, 2 do not show up at all.

    • @mjmcomputers
      @mjmcomputers  5 ปีที่แล้ว +1

      May be a bad selector switch.

    • @mikeb3263
      @mikeb3263 5 ปีที่แล้ว

      @@mjmcomputers Bought another one and the same issue. Looks like its slipping on the shaft. Thus always in a different place. Going to line it back up and put some finger nail polish under it to glue it down.

  • @pws3878
    @pws3878 2 ปีที่แล้ว

    Will the P N safety switch prevent the xfer case from going into 4low? I get an indicator lite in P R D 3 2 1 but not in neutral. It'll go in and out of 4hi when it's in drive. But when I go to neutral and mash the 4low button, it will not engage. I took the xmission out, had it rebuilt and I reinstalled it with a new P N switch because I didn't know at the time you have to heat up the plug to pull it apart. Any thoughts would be greatly appreciated, thanks.

    • @mjmcomputers
      @mjmcomputers  ปีที่แล้ว

      Won’t go in with it in park either?

  • @wocgoblin
    @wocgoblin 3 ปีที่แล้ว

    2003 tahoe - can only drive it in 1st gear and reverse. No check engine lights. Anyone have any ideas

    • @myguitaryourface5160
      @myguitaryourface5160 3 ปีที่แล้ว

      Limp mode check the plug on the side of the transmission for fluid in the connector if you have any fluid in the connector clean it and use dielectric grease or vasoline it should come out of limp mode

  • @vernelllockett6233
    @vernelllockett6233 4 ปีที่แล้ว

    What's the color code of the wires

  • @carlossilva8984
    @carlossilva8984 5 ปีที่แล้ว

    I have this problem but my truck won’t move will this make it go?

  • @ljx6502
    @ljx6502 5 ปีที่แล้ว +1

    QUESTION: I’m having an issue with my Tahoe not starting sometime. If i rock it back and fourth it starts, could this be the issue?

    • @mjmcomputers
      @mjmcomputers  4 ปีที่แล้ว

      Rock the whole truck back and forth? Does the engine turn over at all?

    • @josemarquez5281
      @josemarquez5281 2 ปีที่แล้ว +1

      If you put the ignition switch on and does not light on park , means that the neutral safety switch if off, you need to put in neutral to start the engine

    • @dporrasxtremeLS3
      @dporrasxtremeLS3 2 ปีที่แล้ว

      @@josemarquez5281 Thanks Jose, this is very important, for troubleshooting the adjustment.

  • @jewllake
    @jewllake 6 ปีที่แล้ว

    I'm just curious? Before the adjustment, when 1st would not light up did you have 1st gear, or only 2nd till it lit up. That neutral switch, AKA range selector, does it tell the trans what gear it is in also?

    • @mjmcomputers
      @mjmcomputers  6 ปีที่แล้ว +2

      the trans shifted fine, it wasn't that far out of adjustment.

    • @tatio2007
      @tatio2007 3 ปีที่แล้ว +1

      It actually tells the ecu what gear the teans us in

  • @tatio2007
    @tatio2007 3 ปีที่แล้ว +1

    Leave it to a chevy guy to give me the answer to my acura lol thanks dude

  • @tomchi17
    @tomchi17 ปีที่แล้ว

    "Indention", archaic for "indentation."

  • @shawnbenny5168
    @shawnbenny5168 4 ปีที่แล้ว

    Good video

  • @josedeleon3882
    @josedeleon3882 3 ปีที่แล้ว

    ,

  • @CORVAIRWILD
    @CORVAIRWILD 6 ปีที่แล้ว

    2nd