One thing he did not say is...Use a "heat gun" or your ol lady's "hair dryer" might work too but anyways heat the connectors, after a bit and a little wiggle they will come right out!...y'all are welcome
Im doing a engine swap from a 4.8 (2004) to a 5.3 (2002) the 04 has one plug and the 02 has two plugs can i swap the NSS from one to the other and it work?
Is this the same for every neutral switch? I noticed on my Pontiac g6 it takes a lil bit longer than normal for it to start, like 3-4 seconds and sometimes it doesn't start on the first try.
One thing he did not say is...Use a "heat gun" or your ol lady's "hair dryer" might work too but anyways heat the connectors, after a bit and a little wiggle they will come right out!...y'all are welcome
Are all those wires JUST for sensing neutral/park?
Are they not also used for shifting gears and engaging the lockup solenoid of the TC?
I got very lucky and used no heat and they came out. No breakage. Thank god
All you have do is heat the plugs up with heat gun or blow dryer and the connectors come out like butter
great info on how to adjust the switch!!!
Hey I did a 4l80e swap repinned harness truck won’t start👀 adjust switch still no start but eventually I found out in 2 gear
So, are you supposed to put silicone in there to seal connectors, every time new switches installed?
This helped me get my truck started! Thank you so much!!!
We are happy that this helped, you're welcome!
we have found that our electric heat gun will most of the time get the job done.
That's what i always use.
Im doing a engine swap from a 4.8 (2004) to a 5.3 (2002) the 04 has one plug and the 02 has two plugs can i swap the NSS from one to the other and it work?
Give us a call and we would love to help you out!
i always use a little torch heat the plugs up and they come right out everytime
Do you have any ideas for the 6L80E transmission?
I got the ultimate tip for the harness !!!! I USE A HEAT GUN TO REMOVE THE PLUGS !
Thanks
Is this the same for every neutral switch? I noticed on my Pontiac g6 it takes a lil bit longer than normal for it to start, like 3-4 seconds and sometimes it doesn't start on the first try.
Great explaining
there is a tool to exactly adjust it. free with a gm replacement switch
We see that Thor Converter sticker :) Good info as always guys!
Where is the NSS on a 2004 Cadillac Deville? Is it inside the transmission? I don’t see it outside of it.
The NSS on the 4T65E Transmission is internal you will have to drop the pan to get to it. Thank you for choosing Monster Transmissions.
Can a switch be swapped for one with a different plug
They both bolt on the same way however they each take different wire harnesses.
@@MonsterTransmission the one I have has the same harness but torque converter doesn’t line up any suggestions
@@everydaycar3518 It may be the wrong converter difficult to tell without seeing
It’s a 2005 trans we got it bolted in everything’s working
How do you tell if it was actually rebuilt
Do you know if anyone makes a bracket to fit this type of switch to a 700R4?
We do not unfortunately
Use a lighter and heat the connector casings before pulling on the wires to loosen that glue n save yourself 50 bucks
Dang I was lucky mine didn't break