Tangent Radius Calculation | Workshop Calculation | CNC-Learning | Rajeev Sreedharan

In this video, you will learn to calculate the coordinates of a tangent arc without the use of a CAD software.
There is an Excel template available using which you can calculate the coordinates just by entering the drawing values. You can download it free of charges from below link:
cnc-learning.co...
Welcome to CNC-Learning a channel run by Rajeev Sreedharan
This channel is for CNC learning
Please hit like the video and subscribe to this channel for more such videos.
To check your programming skill, you can use the programming test templates available on our website:-cnc-learning.com/
Free CNC Learning

[@amrounesalah8706]

Merci pour le partage, thanks from Algeria.

[@CNCLearning]

avec plaisir

[@akhisiri3606]

Thank you very much make more videos reg.this sir
Explain all the ways to calculate manually

[@jagamk6888]

Thank you for makeing the video.....

[@CNCLearning]

My pleasure

[@CNCVMCSOLUTION]

Hello sir please make this video in hindi language

[@CNCLearning]

Ok. I will do

[@sriharirenangi8247]

Thank u very much for video.please I.D turning Angle and radius calculations

[@CNCLearning]

Same calculations you can apply on ID too

[@sriharirenangi8247]

@@CNCLearning thank u very much sir

[@manishprogressivechanel]

Under cut radius. With angle explain in hindi

[@CNCLearning]

Send s sample drawing to WhatsApp number 9881052446

[@sipakkumarjena3469]

Thank you sir

[@CNCLearning]

My pleasure

[@datniggaezzy09]

hello thank you for the video can you make a video for a milling machine for angels chamfers and radius

[@CNCLearning]

th-cam.com/video/6qc_ZjCxe0w/w-d-xo.html

[@janardhanarao598]

Back ground lo music yenduku sr

[@CNCLearning]

For all my new videos, I stopped adding background music.
Thanks for the feedback

[@chaosink7950]

Sir., in most of the case in cnc machine shop..there is always problem in radius in and out problem in turning radius in part..what is solution

[@CNCLearning]

Are you referring to any error? Can you elaborate with an example?

[@chaosink7950]

Radius will not tangential to line...in contour trace...how to correct it practically sir..

[@CNCLearning]

That will be either because of back lash in the machine or incorrect coordinates

[@byjutc3037]

Radius in and out is due to incorrect I and K values

[@MachinistHands]

👍👍👍

[@ramgarhia28]

sir agar angle niche or radius upr diya hai to calculation kaise hi go

[@CNCLearning]

Drawing send Karo. Explain karta hum

[@ramgarhia28]

@@CNCLearning send kis pe kru mail ya wtsapp se sir

[@CNCLearning]

WhatsApp

[@jayramkushwaha9311]

Sir please hindi me video banaye

[@CNCLearning]

th-cam.com/video/18umvZHW4NQ/w-d-xo.html

[@m.j.abilash608]

Sir can u make this video in tamil

[@CNCLearning]

Yes. Sure

[@CNCLearning]

th-cam.com/video/NzfRwQbAbJw/w-d-xo.html