If you can't remove the unit off the wall it is more than likely a wired thermostat which shouldn't need batteries. If facing issues with power I'd recommend reaching. out to whomever installed the stat. If it isn't a wired thermostat it should just slide up off the wall to expose the batteries
For the ones that take batteries there's a small leaver you push under the hub to un clip it. Then softly lift hub upwards. To remove from top hinges. You may need to reset hub to factory settings if they've been dead for a while to get it to pair to boiler again.
having an issue where the app and the thermostat says heating but the heating isnt acutally turning on, would that be more of a boiler issue? Doesnt say anything is wrong in the app
My thermostat in manual mode can show temp is 21, then 5 seconds later will show 17.5 and then 18.5 ect. Whats wrong with it please? Bloke who serviced my boiler not interested in helping
I have a hive mini connected to an ideal classic ff260 boiler. However my hot water and heating lights appear to be reversed. Could the installer have reversed the hot water feed cables and the heating cables?
@iheat Thanks for replying. Thermostat says temperature is higher than it really is. Measured by stand alone thermometer( more than one). So heating is satisfied before true tempature is reached. Not so much of a problem. I set it to 23º when I really want 21º👍
Hi mate, I’ve taken over a house where the previous owner used and left their hive for us. After resetting to put on my app it seems to be having connection issues from the hub connected to the boiler and the thermostat is constantly showing “demo”. Any ideas to combat this. Cheers👍🏻
Hey does the app show anything about a demo mode, i've read up about a demo option before logging in. With Hive i'd definitely get in touch with them directly
@@tobyhoskins2366 please share. I was going to send it back. I have paid a high fee to electrician last night and the moment he left, I am facing this issue.
We have 2 hive recievers and one of them switches on the hot water tank and master radiators. The reciver acknowledges when master radiator is set to go on, but the boiler itself doesnt kick start. If we put the hot water on or anything from other receiver (under floor heating), then master rads come on. But if nothing else comes on then boiler pilot light doesnt come on and we have no heating. I can see the receiver going green but boiiler doesnt respond. So strange. This started a year after we been connected and stopped around 6 months ago. Now becoming an issue as winter has kicked in. Any suggestions?
If this originally worked and nothing has changed on your system it sounds like an issue with the receiver and will need replacing. I would suggest contacting the installation company or Hive yourself
I’ve had continuous problems with Hive thermostat - keeps getting stuck on temperature. Worked fine for 6 months and then continued problems, changed batteries etc… I suggest people use alternative.
Ive had mine not even an hour and already experiencing connection issues, the app says the hot water is on when its not, my schedule getting overwritten after I save it, so many bugs. Avoid at all costs. I am sending mine back
I moved into a flat with Hive thermostat but no hub. The thermostat has been losing time since we moved in and is now about 35 mins slow. Its also started disconnecting from the receiver every few months. Is it easy enough to buy a new thermostat and set up up without a hub? It suits us fine on standalone mode apart from these issues.
Yes you can just pair up using the button on receiver, will be plenty of videos on here or ask Hive worst case scenario. Must be super frustrating with the time issue, sorry to hear this
Can you explain the actual temp question. Once target is reached the heating will turn off to save gas. A modulating boiler will do this efficiently to save you money. It will then kick in again once the temperature drops. However most homes in the UK will have good insulation where this isn't very often. If you bought a more expensive Opentherm Thermostat (and your boiler was compatible) the thermostat could tell your boiler to be on constantly but these thermostats can be rather costly for little gain. If you notice your boiler turning off then back on often (multiple times an hour) I'd recommend investing in better insulation however if your boiler is kicking in a few times a day this will be saving a lot on gas than being constantly on.
I have this problem where the date and time just resets every time I set it to the correct time and date so I can't do anything like adding it to a scheduled time,it worked before and I have changed the batteries and I don't have a smart hub,the thermostat can connect to the receiver with no problem but the time and date keeps resetting,as soon as you adjust the time and date the LCD screen goes black then when you push a button again it's reset . Do I need to reset the receiver or get a new thermostat? It works apart the time and date but defeats the purpose of having it on a scheduled time to heat up the house when I get home.
We are having issues with the hub next to the boiler always switching off. The hub was 15m away from the boiler and started dropping out now it’s 6 m and hooked up to a to link deco mesh system and all was good for the first week then it’s dropping out even though when I stand next to boiler I get 55 mbps. Give straight away blamed the to link and tried to sell me the plugs
How far is your router from the boiler? Worth noting you may have a 2.4ghz network and a 5ghz network and when doing speed tests could be on the 5ghz network from your phone or computer which the hive just can't work with. Did they recommend a router reset by any chance?
@ hi router about 20m away from boiler so I bought a to link mesh system and seams to work well, we now have the thermostat fixed to the wall about 9 m from the boiler. With the mesh system we have a hub in the hall, kitchen and upstairs office so good strong wifi around the house. All Hive wanted to do was sell me some plugs to extend the range, just a joke as they then told me hive would not work with the tp link system 🫣
I had a problem with 2 previous Hives, having about 5 meters of range before it disconnects from the receiver.. 1 house was a bungalow aswell.. was a nightmare selling them the hive and it not working properly.. called technical and they said I need a booster.. even though the thermostat and receiver is less than 5 meters apart.
It's worth bearing in mind that hive bulbs and hive active plugs assist the connectivity between other hive components when it comes to range.. This may not seem important at all if your hive set up is working well, however, if you decide to change out a hive bulb or plug for another brand you can suddenly have thermostat/receiver/hive hub connectivity issues and be wondering why....? 🤔
I recently changed Internet provider virgin to EE, I just plugged in the receiver to the new router. The app says it's all connected (I don't remember changing my wi-fi settings on the app Incase that's the issue). Now that it's colder I've noticed my Hive temperature is wrong, I have a grow thermometer in my daughter's room and it's much colder than the Hive. Any solutions ?
I have everything working correctly but can't use app as my phone (android) or my wife (apple) can't connect/pair with thermostat, I tried everything,uninstalling /reinstalling/updates still can't connect.. pairing pairing and nothing happening.horible device if I'm honest
Hi my hive mini is connected to the thermostat I can switch it on off with thermostat but can’t do it on hive app as it’s saying offline can you help me please? X
@@iheat it's the full size thermostat. I've set them up in 3 houses now. I have found the setup process cumbersome and clunky. After hours of going through the steps repeatedly they eventually worked.
Whatever you set the temperature to in manual mode, the boiler will kick in to reach that temp and maintain it the best it can. The newer the boiler, the better it can do this via modulation. Actual temp is just what the thermostat will display as the house temp rises
@ thanks for the reply. Been using it a week. What I’ve noticed is that I’m using more gas. I find that when tries to achieve that target temp, I’m using more gas than when I had my old boiler set low for a longer period.
@@kylejarman2604 at the end of the day it's just a switch with a thermostat. If you're using more gas it's either on longer or reaching a higher temperature or you're on a new tariff with your supplier.
I don't understand what's the point of video clips when audio recordings would be enough, because in video you only see the mouth of someone talking, nothing of the subject of the clip is visualized - things and actions on them!
I do apologise for this, what issues are you facing? The fixes we covered in this video were just common issues that didn't really need visuals (changing batteries and holding the only button on the receiver). More deeper issues like wiring which may need visuals we can't advise customers to do themselves and only be a trained electrician. Would love to follow up this video with a more visual guide on any issues you are facing on your hive, thank you for the feedback and we will be sure to emulate this on the next one!
@iheat hives have so many issues. Wish there was a good video on all the different light sequences & reset options for both hub, thermostat & receiver. I'm on my second thermostat and still have issues ie I just got a new phone. (Same number, same sim) but after at least 3 hours of trying to pair everything I gave up with the hub. They really are terrible. You can set both your receiver and hub to flash orange & nothing happens. Some say turn hub off nothing happens. Some say turn boiler off. Then some say you have to turn hub off and on 6 times. To get it to start pairing. That can wait till the weekend as there's only so much time you can waste on an app.
The hive trv valves are garbage. I am pretty smart and tech savvy. Does not work consistently. Heat on demand does not work. Tried it for two days and it did not work. Avoid Hive valves.
What issues are you facing, these were just common issues and easy fixes. Anything more in depth its easier to just contact Hive then try explain it in a video aha!
@@iheat didn't see any common issues other than explaining what it is etc. I have had a living nightmare from installation with a new boiler 3.5 k ...the system is horrific.
@@iheat comes on with out my switching it on will not switch of other than complete boiler shut down. all devices say its off but no its raging. at least 10 call outs ..gas engineer gets here fiddles one day later back we go. Last year in depth of winter 3 weeks without heating or hot water
How fo you change the batteries when thermostat is attached to the wall?
If you can't remove the unit off the wall it is more than likely a wired thermostat which shouldn't need batteries. If facing issues with power I'd recommend reaching. out to whomever installed the stat. If it isn't a wired thermostat it should just slide up off the wall to expose the batteries
For the ones that take batteries there's a small leaver you push under the hub to un clip it. Then softly lift hub upwards. To remove from top hinges. You may need to reset hub to factory settings if they've been dead for a while to get it to pair to boiler again.
having an issue where the app and the thermostat says heating but the heating isnt acutally turning on, would that be more of a boiler issue? Doesnt say anything is wrong in the app
I would say thats a connectivity issue to the boiler, might be the wiring or a reset could fix it all
My thermostat in manual mode can show temp is 21, then 5 seconds later will show 17.5 and then 18.5 ect. Whats wrong with it please? Bloke who serviced my boiler not interested in helping
Anyone any idea please?
I have a hive mini connected to an ideal classic ff260 boiler. However my hot water and heating lights appear to be reversed. Could the installer have reversed the hot water feed cables and the heating cables?
This could be the potential issue, have you got them back to fix / investigate
Hive thermostat says temperature is20.5. Actual temperature is 18.
Is there a way to calibrate this?
That will be the target temperature, are you in manual mode or on a schedule
@iheat Thanks for replying.
Thermostat says temperature is higher than it really is. Measured by stand alone thermometer( more than one). So heating is satisfied before true tempature is reached.
Not so much of a problem. I set it to 23º when I really want 21º👍
Hi mate, I’ve taken over a house where the previous owner used and left their hive for us. After resetting to put on my app it seems to be having connection issues from the hub connected to the boiler and the thermostat is constantly showing “demo”. Any ideas to combat this. Cheers👍🏻
Hey does the app show anything about a demo mode, i've read up about a demo option before logging in. With Hive i'd definitely get in touch with them directly
Same issue. Really fed up. How did you fix this issue?
@ Mate sent me a video that worked perfectly straight away I’ll try find it again
@ th-cam.com/video/VgFfjRUQ24o/w-d-xo.html&pp=ygUgQ29ubmVjdGluZyBhIGhpdmUgdG8gYSBuZXcgcGhvbmU%3D
@@tobyhoskins2366 please share. I was going to send it back. I have paid a high fee to electrician last night and the moment he left, I am facing this issue.
We have 2 hive recievers and one of them switches on the hot water tank and master radiators. The reciver acknowledges when master radiator is set to go on, but the boiler itself doesnt kick start. If we put the hot water on or anything from other receiver (under floor heating), then master rads come on. But if nothing else comes on then boiler pilot light doesnt come on and we have no heating. I can see the receiver going green but boiiler doesnt respond. So strange. This started a year after we been connected and stopped around 6 months ago. Now becoming an issue as winter has kicked in. Any suggestions?
If this originally worked and nothing has changed on your system it sounds like an issue with the receiver and will need replacing. I would suggest contacting the installation company or Hive yourself
I’ve had continuous problems with Hive thermostat - keeps getting stuck on temperature. Worked fine for 6 months and then continued problems, changed batteries etc… I suggest people use alternative.
Have you tried contacting Hive about this? Do they offer any support or replacement?
Ive had mine not even an hour and already experiencing connection issues, the app says the hot water is on when its not, my schedule getting overwritten after I save it, so many bugs. Avoid at all costs. I am sending mine back
I moved into a flat with Hive thermostat but no hub. The thermostat has been losing time since we moved in and is now about 35 mins slow. Its also started disconnecting from the receiver every few months. Is it easy enough to buy a new thermostat and set up up without a hub? It suits us fine on standalone mode apart from these issues.
Yes you can just pair up using the button on receiver, will be plenty of videos on here or ask Hive worst case scenario. Must be super frustrating with the time issue, sorry to hear this
Can you explain why number 1 the actual temp is wrong, and once target reaches the heating then goes off. How to keep heating on constantly?
Can you explain the actual temp question. Once target is reached the heating will turn off to save gas. A modulating boiler will do this efficiently to save you money. It will then kick in again once the temperature drops. However most homes in the UK will have good insulation where this isn't very often.
If you bought a more expensive Opentherm Thermostat (and your boiler was compatible) the thermostat could tell your boiler to be on constantly but these thermostats can be rather costly for little gain. If you notice your boiler turning off then back on often (multiple times an hour) I'd recommend investing in better insulation however if your boiler is kicking in a few times a day this will be saving a lot on gas than being constantly on.
I have this problem where the date and time just resets every time I set it to the correct time and date so I can't do anything like adding it to a scheduled time,it worked before and I have changed the batteries and I don't have a smart hub,the thermostat can connect to the receiver with no problem but the time and date keeps resetting,as soon as you adjust the time and date the LCD screen goes black then when you push a button again it's reset .
Do I need to reset the receiver or get a new thermostat? It works apart the time and date but defeats the purpose of having it on a scheduled time to heat up the house when I get home.
Hey this sounds like a software issue, i would look to replace the unit. Hope this helps
We are having issues with the hub next to the boiler always switching off. The hub was 15m away from the boiler and started dropping out now it’s 6 m and hooked up to a to link deco mesh system and all was good for the first week then it’s dropping out even though when I stand next to boiler I get 55 mbps. Give straight away blamed the to link and tried to sell me the plugs
How far is your router from the boiler? Worth noting you may have a 2.4ghz network and a 5ghz network and when doing speed tests could be on the 5ghz network from your phone or computer which the hive just can't work with. Did they recommend a router reset by any chance?
@ hi router about 20m away from boiler so I bought a to link mesh system and seams to work well, we now have the thermostat fixed to the wall about 9 m from the boiler. With the mesh system we have a hub in the hall, kitchen and upstairs office so good strong wifi around the house. All Hive wanted to do was sell me some plugs to extend the range, just a joke as they then told me hive would not work with the tp link system 🫣
I had a problem with 2 previous Hives, having about 5 meters of range before it disconnects from the receiver.. 1 house was a bungalow aswell.. was a nightmare selling them the hive and it not working properly.. called technical and they said I need a booster.. even though the thermostat and receiver is less than 5 meters apart.
5 metres sounds very odd, what thermostats have you offered recently? any that stand out to you the most?
My Hive Green Tick is Not working do I need to buy New one or can I fix it I press the tick and not working
Are you on about the receiver with the green tick?If so I would contact Hive directly to see if its an issue with the product itself
It's worth bearing in mind that hive bulbs and hive active plugs assist the connectivity between other hive components when it comes to range.. This may not seem important at all if your hive set up is working well, however, if you decide to change out a hive bulb or plug for another brand you can suddenly have thermostat/receiver/hive hub connectivity issues and be wondering why....? 🤔
This is awesome advice, thank you for this!
I have to change battery every 24h… it always say “Battery low”. I am using Duracell rechargeable the best on the market! What can I do?
That sounds odd, but definitely a battery issue - have you tried just regular batteries (non-rechargeable)
I recently changed Internet provider virgin to EE, I just plugged in the receiver to the new router. The app says it's all connected (I don't remember changing my wi-fi settings on the app Incase that's the issue). Now that it's colder I've noticed my Hive temperature is wrong, I have a grow thermometer in my daughter's room and it's much colder than the Hive. Any solutions ?
I would get in touch with Hive customer service, it may require a reset or a new unit completely.
The hub connection to the thermostat isn't the problem, the issue is that I can't use the app as it constantly says its offline.
Have you tried to contact Hive regarding this, could be a firmware issue
Yes I have,talked me through switching it off at the boiler and resetting, it worked only one time,now I can't use the app
My hive is connected to the wifi but i cant get the app to work tried reinstalled several times but still wont work
When you say app not working do you mean not connecting to your hive system or just in general? Keeps crashing etc or never loading
I have everything working correctly but can't use app as my phone (android) or my wife (apple) can't connect/pair with thermostat, I tried everything,uninstalling /reinstalling/updates still can't connect.. pairing pairing and nothing happening.horible device if I'm honest
Hi my hive mini is connected to the thermostat I can switch it on off with thermostat but can’t do it on hive app as it’s saying offline can you help me please? X
I would get in touch with Hive customer service, it may require a reset or a new unit completely.
Iv got the problem saying the hub is already registered with another property even tho its supposed to be new
This is very odd, have you contacted where you bought it from
Amazon they are sending out returns @iheat
You can reset hub to factory settings. Took me a while but I got there as I bought one on Ebay.
@@sunseeker9581 I've tried any information on how to..
Setup is notoriously difficult. It's really troublesome and not straightforward at all.
What did you find difficult, was this with the mini or fullsize unit?
@@iheat it's the full size thermostat. I've set them up in 3 houses now. I have found the setup process cumbersome and clunky. After hours of going through the steps repeatedly they eventually worked.
Losing my sh!t here. Is there a way I can just set the temp to my liking? I have no interest in target temp/actual temp.
Whatever you set the temperature to in manual mode, the boiler will kick in to reach that temp and maintain it the best it can. The newer the boiler, the better it can do this via modulation. Actual temp is just what the thermostat will display as the house temp rises
@ thanks for the reply. Been using it a week. What I’ve noticed is that I’m using more gas. I find that when tries to achieve that target temp, I’m using more gas than when I had my old boiler set low for a longer period.
@@kylejarman2604 at the end of the day it's just a switch with a thermostat. If you're using more gas it's either on longer or reaching a higher temperature or you're on a new tariff with your supplier.
I don't understand what's the point of video clips when audio recordings would be enough, because in video you only see the mouth of someone talking, nothing of the subject of the clip is visualized - things and actions on them!
I do apologise for this, what issues are you facing? The fixes we covered in this video were just common issues that didn't really need visuals (changing batteries and holding the only button on the receiver). More deeper issues like wiring which may need visuals we can't advise customers to do themselves and only be a trained electrician. Would love to follow up this video with a more visual guide on any issues you are facing on your hive, thank you for the feedback and we will be sure to emulate this on the next one!
@iheat hives have so many issues. Wish there was a good video on all the different light sequences & reset options for both hub, thermostat & receiver. I'm on my second thermostat and still have issues ie I just got a new phone. (Same number, same sim) but after at least 3 hours of trying to pair everything I gave up with the hub. They really are terrible. You can set both your receiver and hub to flash orange & nothing happens. Some say turn hub off nothing happens. Some say turn boiler off. Then some say you have to turn hub off and on 6 times. To get it to start pairing. That can wait till the weekend as there's only so much time you can waste on an app.
Tbh I'm sick of my Hive always losing signal, forever taking the batteries out, very temperamental 😏
Is it too far from the boiler?!
The hive trv valves are garbage.
I am pretty smart and tech savvy.
Does not work consistently.
Heat on demand does not work.
Tried it for two days and it did not work.
Avoid Hive valves.
literally the most unhelpful video - zero solution aside from buying different batteries offered.
Very sorry to hear this, what issue are you facing? Maybe we can cover it in the next one to help anyone facing same issue
What an absolute useless problem solving video...the system is total BS !!!
What issues are you facing, these were just common issues and easy fixes. Anything more in depth its easier to just contact Hive then try explain it in a video aha!
@@iheat didn't see any common issues other than explaining what it is etc. I have had a living nightmare from installation with a new boiler 3.5 k ...the system is horrific.
@@iheat comes on with out my switching it on will not switch of other than complete boiler shut down. all devices say its off but no its raging. at least 10 call outs ..gas engineer gets here fiddles one day later back we go. Last year in depth of winter 3 weeks without heating or hot water
Sounds like a heating link not been removed if its always on, who installed it? Doesn't sound like an iHeat job!
@@iheat I will mention that thank you
Hive is absolute rubbish
What system do you prefer!