Make Your Pedals Sound Better!
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- We had the privilege of sitting down with David Grissom to talk about some of his tone secrets! Today, we're talking dialing in your delay & overdrive pedals to get the best tone possible!
If you have questions, let us know in the comments below!
🔻 //support// 🔻
/ rigdoctor
paypal.me/rigd...
🔈 //podcast// 🔈
Apple: apple.co/36dSQzK
Spotify: spoti.fi/2WGLku8
⬇️ //recommended materials// ⬇️
//buffers//
Mesa Boogie High-Wire (dual buffer) - bit.ly/2lZwS0s
Empress Stereo Buffer - amzn.to/33lyvHk
Vertex Boost - amzn.to/3hVwvN2
TC Bonafide Buffer (output buffer only - you'll need two) - amzn.to/2vrTSug
//power supply//
CIOKS DC7 - amzn.to/3d4qOty
CIOKS 8 - amzn.to/2zW5YOn
CIOKS 4 - amzn.to/33jWAOZ
Truetone CS6 - amzn.to/2wWLbII
Truetone CS7 - amzn.to/2x1Nf2k
Truetone CS12 - amzn.to/33rfLq3
Voodoo Lab x4 - amzn.to/2ILwKtP
Strymon Zuma - amzn.to/3dpZANe
Strymon Ojai - amzn.to/3evVXGE
Strymon Zuma R300 - amzn.to/2ZgLclt
//patch cables//
Mogami 2319 (bulk cable) - amzn.to/2HIZ7dm
SquarePlugs SP500 (pancake) - bit.ly/32m63mU
SquarePlugs SPS5 (straight) - bit.ly/34qiajW
//dc power cables//
2.1mm DC Power Plugs (right angle) - bit.ly/2pGqXzI
2.1mm DC Power Plugs (straight) - bit.ly/36wd1sA
Bulk Power Cables (pre made) - amzn.to/3ev1q0t
//pedalboards, lifts, risers, bridges//
Pedalboard Surfaces - gomc.tv
Pedal Risers/Lifts/Bridges - fixpedalboards...
//velcro//
3M Dual Lock SJ3550 (for pedal) - amzn.to/2TP1rlu
3M Dual Lock SJ3551 (for base) - amzn.to/2I8a7SG
//cable management//
Zip Ties - amzn.to/2HP1Ulv
Tie Down Mounts - amzn.to/2r5ZkAN
//pedalboard tools//
Soldering Iron - amzn.to/2TTdMI4
Solder (60/40) - amzn.to/2U7XhsD
Solder Dispenser - amzn.to/2GpgMpR
Octopus Arms - amzn.to/2V3O8OD
Wire Strippers (30-20 AWG) - amzn.to/2BBMI6n
Wire Strippers (20-10 AWG) - amzn.to/2EbhBR3
Wire Snips - amzn.to/2EazwqU
Vise - amzn.to/2E9eTLO
Heat Gun (embossing gun) - amzn.to/2BwGdlm
Label Maker - amzn.to/2BCBcHU
Label Maker Tape (black) - amzn.to/2Cd3CZe
Label Maker Tape (clear) - amzn.to/34piDD4
Deoxit D5 Contact Cleaner - amzn.to/2GEm4gu
Truetone Milliamp (mA) Reader - amzn.to/2F9v3VN
Tone Brush - amzn.to/2HIfze3
Upholstery Crow Bar - amzn.to/2HIOU0K
Multimeter - amzn.to/2YW9BdE
Goo Gone - amzn.to/31rGJeS
//midi//
MIDI Plugs (right angle) - bit.ly/2oKHDFG
MIDI Plugs (straight) - bit.ly/32fNNLF
MIDI Cable (bulk) - amzn.to/2tPAHWQ
👇 CLICK BELOW FOR ALL DIY DIAGRAMS 👇
DIY Power Cables: vertexeffects.....
DIY Interface: vertexeffects....
CONTRIBUTORS:
Hunter Harrison - Mixing, Audio Editing
Mason Mejia - Co-Producing
Mason Marangella - Co-Producing
#DavidGrissom #RigDoctor #GuitarPedals - ภาพยนตร์และแอนิเมชัน
“People have delay issues”, as the sound is delayed on the video. Hahaha. Perfect timing.
Level over gain will always be the way. The drive should just shape the eq a bit more than anything
This is the way
Thanks, guys!
I use a boost, and compression if I am playing at low volume to try and get that SRV tone...it helps. Thanks for the tips...keep them coming.
“ people have delay issues “; should be a tshirt...
I thought this was common sense but this is useful to inexperienced players.
David Grissom and Vertex, yeah boy! 🤘🏼🤘🏼🤘🏼
I currently run my chorus and delay and reverb in the fx loop of my 5150iii 6l6...i also have a marshall jvm410h do all 3 of those pedals need to be stereo to run them through the fx loop of both amps
You would run the send of the 5150 into the input of your chorus (mono), then connect the chorus to the delay and reverb in stereo (probably as you do now). Then the output of the reverb put the left side back to the 5150 FX Loop return, and the right side of the reverb to the JVM410 FX Loop return.
@@VertexEffectsInc thank you sir for the response...love the content by the way...I've learnt alot
mix knob and tap tempo
Grindcore and Ambient musicians be like...
if you can't figure out a 3 knob delay then you have no right owner guitar pedals
What’s your feeling on making TH-cam comments but having no grasp on spelling and grammar?