HOW TO REPLACE 16 NISSAN SENTRA EVAPORATOR - AC PROBLEMS
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- 2016 Nissan Sentra Evaporator Removal & Replacement
Thanks for watching, please LIKE & SUBSCRIBE to see future uploads.
Leave us a comment if you have questions about anything Nissan Datsun Infiniti
Follow us on:
/ drzaauto
@drzaauto
/ drzaauto
Tiktok @drzaauto1
www.drzaauto.net
We are known for our extensive knowledge on Nissan Datsun Infiniti including JDM Cars
We perform all Upgrade, Engine Swaps, Modifications, & Custom Fabrication to fit your needs (anything you want to build we can make it happen)
We are NOT responsible for your actions on the road, our cars are built for off road usage ONLY.
Drza Auto
201 Southridge Industrial Dr.
Tavares, FL 32778
by appointments only
352-508-5710
Im doing a evaporator core now,2014 sentra its terrible, your video has helped me out.
GLAD TO HEAR, THIS ONE WAS NOT FUN..
Just did one of these today... Labor time is WAY off. this is a 8 to 10 hr job . Never again without replacing the entire HVAC unit. Its listed as not- repairable in Mitchell for a reason. What a nightmare. Sell the hvac box and get 8hrs labor, thats a fair amout of time. If your going to try to take the box apart add at least another 2hrs labor and be prepared to for a lot of donations to the curse jar.
Yea sir, totally dunks and the book time is way way off. Hopefully this video helps …appreciate your input
hey i saw another video talking about when removing the steering to be careful not to move it to much cause something could break couldn’t understand to much since it was in spanish so you know anything about that?
Ok yea of course, there’s a sensor in the steering column that controls the horn and airbag so if you’re not careful you could damage it
Did you disconnect the battery when performing this job.? I have a 2016 Nissan Sentra that is leaking engine cooling fluid from the heater core, I am not quite shure if I need to remove all the dashboard.
Yes, you would need to disconnect the battery and also this would be the same exact job as in this video so you would have to do all of that as well.
I found a better way to take out the heater core. I disconnected the two aluminum pipes moved them away Just enought to let the core pass previously unscrewed (3 T20), I had to bent a 1x2 " Just 90degrees to make room to remover the Hester, I decided to reused the old aluminum pipes, unscrewed the accelerator pedal braket without disconnecting its sensor, put the new heater core, new orings and putting back all in reverse order. The old heater core has a black stain I am quite Shure it was the place were it was leaking engine cooling fluid. Replaced all the coolant as well.
Ok great, glad to hear ! Thanks for you info.
Is a 2018 Sentra 1.8l evap core change out more difficult?
I haven't done a 18 but I think 16-19 are about the same, good luck ...
good sir
Thank you, glad it helped
I have a 2011 Sentra and all I did was take out my glove box and I could reach the core. 15 minutes.
ok that great for you but 2011 and 2016 are completely different