I'm selling detailed plans for the LaserPecker 4 rotary jig. The package includes a high-resolution image of the plans, a SketchUp file for 360 degree viewing, and a video guide to walk you through the build. You can find them here: www.patreon.com/KennyGregory/shop/laserpecker-4-rotary-tool-jig-plans-567251
I'm selling detailed plans for the LaserPecker 4 rotary jig. The package includes a high-resolution image of the plans, a SketchUp file for 360 degree viewing, and a video guide to walk you through the build. You can find them here: www.patreon.com/KennyGregory/shop/laserpecker-4-rotary-tool-jig-plans-567251
This video was super helpful for setting up vertically. Can you also show us what you set up for the rotation on the app as you engrave. Ie I know when I have it horizontal I rotate 90 degrees to the right to have it engrave across properly. Do you use this same setting when the base faces away? do you invert the image or text when you have it facing forward? Super appreciate everything!
The orientation between the laser and the rotary is the same. So, for an item upright rotate 90 degrees. Which way the base is does matter, as it is rotating the same way. You don't need to mirror the design for text.
Kenny, thanks for this video. Alignment for the rotary tool is frustrating but this is a great solution. Could you please post the length of the middle layer 1x4 piece that runs parallel to the laser head in your jig? That's all we need to make our own.
Update: I worked out what I think are the dimensions of this jig. Starting with the primary cross pieces, they appear to be 1x4, and that 4in width helps us calibrate. The frame around the base of the LP4 is made of 1x1 pieces; just measure your base and cut accordingly, but the two longer pieces should be about 13in. If the LP4 frame measures 13" on the long side and the main jig cross pieces are indeed 4in wide, the length of the 1x4 pieces should be 15.5in. Finally, there are three 1x2 pieces that make up the bottom layer; two at each end of the jig, and one that frames the LP4 rotary attachment. Would be great to get confirmation from Kenny but hopefully that's a starting point for people. Good luck!
I'm selling detailed plans for the LaserPecker 4 rotary jig. The package includes a high-resolution image of the plans, a SketchUp file for 360 degree viewing, and a video guide to walk you through the build. You can find them here: www.patreon.com/KennyGregory/shop/laserpecker-4-rotary-tool-jig-plans-567251
I'm selling detailed plans for the LaserPecker 4 rotary jig. The package includes a high-resolution image of the plans, a SketchUp file for 360 degree viewing, and a video guide to walk you through the build. You can find them here: www.patreon.com/KennyGregory/shop/laserpecker-4-rotary-tool-jig-plans-567251
Thanks. I made this but a little different because I missed a step. How do you know where to put the laser for the correct height. In other words the laser would be lower for a shorter tumbler and higher for taller one. Is there a formula for it?
I am not sure what you are asking. You place the height where you want to engrave. If you are hoping to do a full wrap. That is a bit more planning and work to accomplish.
Hi Kenny, that is a great idea. Do you happen to have any measurements or plans for your idea. Best regards
I'm selling detailed plans for the LaserPecker 4 rotary jig. The package includes a high-resolution image of the plans, a SketchUp file for 360 degree viewing, and a video guide to walk you through the build. You can find them here: www.patreon.com/KennyGregory/shop/laserpecker-4-rotary-tool-jig-plans-567251
Yes looking for dimensions as well. Thank you for your help just subscribed
I'm selling detailed plans for the LaserPecker 4 rotary jig. The package includes a high-resolution image of the plans, a SketchUp file for 360 degree viewing, and a video guide to walk you through the build. You can find them here: www.patreon.com/KennyGregory/shop/laserpecker-4-rotary-tool-jig-plans-567251
This video was super helpful for setting up vertically. Can you also show us what you set up for the rotation on the app as you engrave. Ie I know when I have it horizontal I rotate 90 degrees to the right to have it engrave across properly. Do you use this same setting when the base faces away? do you invert the image or text when you have it facing forward?
Super appreciate everything!
The orientation between the laser and the rotary is the same. So, for an item upright rotate 90 degrees. Which way the base is does matter, as it is rotating the same way. You don't need to mirror the design for text.
Amazing video, thank you
Kenny, thanks for this video. Alignment for the rotary tool is frustrating but this is a great solution. Could you please post the length of the middle layer 1x4 piece that runs parallel to the laser head in your jig? That's all we need to make our own.
Update: I worked out what I think are the dimensions of this jig. Starting with the primary cross pieces, they appear to be 1x4, and that 4in width helps us calibrate. The frame around the base of the LP4 is made of 1x1 pieces; just measure your base and cut accordingly, but the two longer pieces should be about 13in. If the LP4 frame measures 13" on the long side and the main jig cross pieces are indeed 4in wide, the length of the 1x4 pieces should be 15.5in. Finally, there are three 1x2 pieces that make up the bottom layer; two at each end of the jig, and one that frames the LP4 rotary attachment. Would be great to get confirmation from Kenny but hopefully that's a starting point for people. Good luck!
Thanks Kenny. Do you have the plans/dimensions for the jig you made and can you share them?
I'm selling detailed plans for the LaserPecker 4 rotary jig. The package includes a high-resolution image of the plans, a SketchUp file for 360 degree viewing, and a video guide to walk you through the build. You can find them here: www.patreon.com/KennyGregory/shop/laserpecker-4-rotary-tool-jig-plans-567251
Hello, great idea. Do you sell the jig itself? Not interested in building myself. lol
@@ballengerfamily2492 no I don't sell built jigs.
Well done
Nicely done! I would like to 3D print something like this. Do you have dimensions for us.
I'm selling detailed plans for the LaserPecker 4 rotary jig. The package includes a high-resolution image of the plans, a SketchUp file for 360 degree viewing, and a video guide to walk you through the build. You can find them here: www.patreon.com/KennyGregory/shop/laserpecker-4-rotary-tool-jig-plans-567251
Did you ever print a 3D model of this jig from the plans? Just wondering if it worked out? Thanks
@@nikkishort3968 No I didn't. Little bit too much work. I purchased the plans and made the jig from wood. Works great!
WoooW thanks..!!
Thanks. I made this but a little different because I missed a step. How do you know where to put the laser for the correct height. In other words the laser would be lower for a shorter tumbler and higher for taller one. Is there a formula for it?
I am not sure what you are asking. You place the height where you want to engrave. If you are hoping to do a full wrap. That is a bit more planning and work to accomplish.