Creality Ender 3 V3 CoreXZ 3D Printer Review
ฝัง
- เผยแพร่เมื่อ 29 พ.ค. 2024
- Thank you to @Creality3D for sending me the first production version of their Ender 3 V3 - The CoreXZ product that breaths new life into the the Ender 3 product line.
This is where you can buy it now! - shorturl.at/jqKPX (aff link) $389
Thank you again to the channel sponsors Polymaker & PCBway - without them I wouldn't be able to make this content and support inside the 3D Printing community. Check out www.pcbway.com for all of your PCB needs!
Polymaker - us.polymaker.com?aff=22 (my affiliate link)
0:30: ⚙️ Review of the latest Creality Ender 3 V3 3D printer model with CoreXZ motion system.
3:18: ⚙️ Overview of key features and specifications of Creality Ender 3 V3 3D Printer
5:51: ⚙️ Review of Creality's latest 3D printer model focusing on CoreXZ technology and print quality optimisation.
8:26: ⚙️ Review of Creality Ender 3 V3 3D Printer with CoreXZ technology and firmware updates.
11:17: ⚙️ In-depth review of a new 3D printer model with a unique design and features. - วิทยาศาสตร์และเทคโนโลยี
Loved seein you in the stream so much Sam!
Seriously made my day seein my favorite youtuber on Crealitys live stream!
Thanks dude !!
ñ@@TheRealSamPrentice
I truly do believe this and the 3 V3 SE and KE are extremely good printers. The price is amazing, and if they would make an adapter similar to the Bambu A1, for multi color, then it would be just as good if not better. I have not had 1 print fail on my V3 SE and have never seen issues with the KE when i have used it. I would suggest this or the others mentioned as ANYONES initial printer. IT JUST WORKS REQLLY WELL.
I might get one as an upgrade to my Ender 3, however with local pricing (AUD) the P1P is only 200 more, so it doesn't seem like great value.
I’ve been doing a lot of research Sam and even though I have the K-1 and the K-1 Max and the SE im holding off to get the V3. It looks like an outstanding printer, a game changer in the 3-D printing industry.
I don’t think you’ll be disappointed
Well i have a 2pro and i am eager to see a v3 2pro. As at the moment both X&E bowden motors are on the counter arm adding weight and print quality is maxed at 250/300mm/s. With the new xz it would go above and beyond as it would reduced wobble and weight and far superior wire management. To be able to have speed the XZ setup cuts off weight to centralise mass and to reduce whiplash to retain quality with faster speeds.
Thanks Sam, I have been waiting for s review of this one as im still after a workhorse for the workshop to replace my ageing workhorses while my Max does the bigger stuff.
would you mind sharing the orca profile plase? cant seem to find it anywhere
Can you do a video of it versus the ender 3v3 ke
KE is much cheaper, a little bit slower but really much better printer. This V3 version can't do perfect first layer as KE can, has much harder way of loading filament, spool is on the side so when extruder goes up it pulls filament and when it goes down it just pushes that filament under the bed or around cables. On V3 you can adjust z offset only when print is in progress and you will have to adjust it because bed is uneven (not only on my printer, i see videos of other people having issues with it but saying it's amazing printer). Also on this printer if you are sending gcode files directly from your pc and after one file is done printing, printer will lose connection for some reason so sometimes you can't send other one until you reset connection. Only good things about V3 are looks and good screen, really KE is better for everything else.
That is absolutely hilarious 3:11 the koala outfit 😂😂
You’ve seen me in much more skimpy attire
Great video... everyone should really watch untill the end!
You know!
After having recently purchased a K1 (and have been utterly disappointed with the lack of reliability and a plethora of issues plaguing my unit), my next printer purchase will most likely be the Ender 3 V3 Core XZ machine (but I would strongly recommend that one wait about 6 months or more until all of the initial bugs are worked out of the machine as there will inevitably be several "fixes" in the form of new releases in the upcoming future). Until then, I'll stick with my trusty & reliable original Ender 3.
I've had this for 4 months, so we can all wait two right?
Go for a Bambulab a1, way more worth it trust me!
@TotallyNoAim its a good option when they start selling them again of course, after the safety recall. #awks
Outstanding review. For almost the same price the Bambu Lab A1 offers 38% more volumen AND the option of multi material, but to me it's actually the option to let the AMS to change filament when current filament run out it's more appealing, I do have a KE and it's a good tinkerer machine and it's miles behind an A1, specially in the amount of plastic parts the KE has. I got the KE because the A1 was actually recalled... Anyway the CoreXZ looks promising, to me Creality should create (at least) a filament run out tool.to keep the printer running (if not a full multi material system) to be competitive with Bambu Lab... My next printer definitely an A1.
Where on earth do you find a A1 for almost the same price?! Lol
According to your review, im still not convinced that this v3 is better then the CR10Se, at same price point, and as durable and less tinker printer. Have you rooted the cr10se and does it make a real diference if rooted?
I wasn't a big fan of the SE to be honest, over this it doesn't compare.
@@TheRealSamPrenticei bought CR-10 SE as it price at $284. Not at $399/349. Only on that case it's worth more than V3 . But if at the same price v3 will outsell fast.
Looks dope. I don't have a Core XZ or room for another printer. So what do I do?
Move?
What hotend and nozzle does it use and is it the same as that in the k1 and k1 max?
The k1c
Thanks. Trying to find replacement parts just in case as I've just bought a v3 and google isn't keen on separating the v3 from the other variants. I assume it's because it's fairly new buy man those nozzle replacements are expensive compared to regular nozzles.
seems like a big advantage if non-planar slicing becomes more available, but right now it's mostly just for compactness
Started in December 2023 with ender 3 v2. I just ordered the Core XZ tonight.
Great move !
I think the Bambulab a1 is a better choice
Again when the safety issues have been resolved the a1 is a star! Also I’ve reviewed that printer and the a1 mini on this channel and I think they are great!
@@TheRealSamPrentice a1 mini is not that good for funktional prints tho.. it got a lot of scew. But for cosmetic stuff it's great👍
@TotallyNoAim I’m printing mechanical prints on it right now as it happens, it’s been great so far. Companies are stepping up their game.
Hello. What is the fastest speed you got on a successful print? Thanks.
It doesn’t really work like that, max speed is around the 600mms mark but there are factors where the print will need to slow down, on the test print the long path will be 600 but the movement around the shapes will be half
For a beginner this very hard to choose specially the price range is almost close to the latest Creality 3d printer series... Please help me to choose
I can't seem to find a orca slicer profile for this thing. Did Creality share this profile anywhere that I can download from?
If they didn’t I might be able to
Use the k1 profile it works great
I like the simplicity looks & design 5/5. XZ no way. the rest are cool K1 specs👍. I won’t buy becos it’s XZ. I prefer screw or independent belted Z. Thanks for making the video.
man. i cannot find anywhere comparesment of this printer with KE.... please do it - becouse so long i dont know what should i buy
This printer is a really good upgrade compared to the KE, the only reason you should buy the KE is if you have a tight budget, they are both very reasonable printers, Hope this helps:)
What slicers you use Sam! So I can get it all ready on my computer
Edit:ohhh orca
It uses orca slicer
Think cura works 🤔💭
@@Angelo-24. it might do but for klipper printers I’ve found superslicer and orca to be better
Definitely too many Ender 3 printers, hahaha. They should have called this the Ender XZ or something for sure. That said, seems like a solid printer overall. Just not sure the kinematics actually offer a major advantage over all the other bed slingers. Also hard to pay near $400 for this when something like the Flashforge Adventurer 5M has been going for $300 or even less with some coupons. Nice quick review!
Due to price of Ender 3 V3, I would buy the K1 when you can find it in the $399 or less cost range. That is about 200 cheaper than K1C. I believe the Ender 3 v3 would be more interesting of a choice if it had a price point of around $299:)
You can find the k1c for only 50 more, and that's worth. Already for the diagonal artifacts it's worth it
It might go down in time… if it gets under $300 it could be a great value
I just recently bought two KEs but idk if i should cry 🤣 to be fair these will be double the price when they land here but still
You’ll be fine :)
I'm not sure if i should get the ender 3 v3 ke, ender 3 v3 or cr 10 se. I have the budget for either and why? Thanks in advance
What are you looking to print ?
@TheRealSamPrentice, nothing too fancy, just random things and maybe some cool gadgets and some somewhat large things. I also want something high quality that will last me 2+ years. I also care about speed but the difference from 500mm to 600 mm/s won't make a difference to me. Decent quality is a must and not too much ghosting or ringing. Also hands free leveling is super important. Thanks 🙂
@Antoan108 maybe the Ke would be better in that case
@TheRealSamPrentice, why the ke? Isn't the v3 xz more high quality and better prints? Price is not an issue between ke the v3 xz.
@Antoan108 well it’s on rails but also so is the se,
Interesting design decision. At some point though, they need to ditch the 3 and go with another number instead of adding random letters after the 3.
totally agree!
what do you think of this printer for practical use prints and for robotics. especially for beginners, as I may just cut cost else where to be able to afford something like this.
I think it offers a good balance for both, if you go core xy I’ve found that from time to time the accuracy changes. The i3 style like the v3 seems to be a good choice over all. At least from my time using it
You also have the CR 10 SE in the mix. We need a really good review on the different rails. The benefits of linear rails vs linear rods vs SG15 has never been proven to me.
i also need to know that comparison!! since i jumped the gun and bought the cr10se this weekend arriving next Thursday, as my first 3dprinter for, i hope, more then 5 years in the future.
Okay so the v3 is faster overall the se is nice but it’s really the 4th ender 3 in this line up.
@@xCyAx Hi, after a few months, what do you think about your new CR 10 SE ?
@@Not-Einstein-61 I returned it after it arrived and didn't manage to test it. I went with this V3 CoreXZ and i love it. Lots of meaningful firmware updates.
@@xCyAx Wow, good to know that, thanks.
Im torn between this printer and Neptune 4 pro. Taking all opinions. Help a brother out.
Well the v3 is faster for sure
Is everyone forgetting the voron switch wire ?
Nope, watch the video.
Nah bro they finna be releasing a core xy ender 3 v17!
Great effort.
Print quality doesnt look all that great for the price. I just sent my Bambu A1 back in the recall and it was producing better quality prints for the same price. I think I'm just going to wait till they fix the A1 and use the discount they gave me to get another. This printer is a bit dissappointing.
It’s not catching fire tho is it ?
Dont know its not out yet?
I have six other Creality machines. I'm not a bambulab shill. I just feel for the price the print quality isn't there.
I’ve had this for 3 months, and the a1 also
No issues with either
As soon as i convert my ender 3 v2’s z axis to belt drive, they release this-
Figures lol.
Ah they copied your idea !!
@@TheRealSamPrentice no please credit Kevinakasam. His engineering is seriously top notch.
Wait... is really nobody going to mention the Ender 3 rock song at the end???
I know right !!!
I'm confused with all the new printers. I'm not necessary looking for the fastest printer. I want the best quality print without breaking the bank.
Then you should go the Bambu Lab way… honestly, the P1S is such a steal for the quality it creates.
Or do you buy the next incrmental upgraded bs machine in 3 months? #crealityclownery
Maybe you’re in business and know better? It’s not just one company is it, they all do that.
@@TheRealSamPrentice Ah the clown argument.
Has to be expected from wannabe "unbiased" reviewer.
First: not true.
Assuming is true: would you like to compare customer service of other companies aswell?
People are still waiting for replacement for their CR-Touch with defective condesator (fixed on new revision, but screw you customer that have already paid full price).
Or the banana Beds on the S series?
Or machined mod on the industry standards?
So you HAVE TO BUY everything from them?
Oh and not just the replacements that you need.
Just Imagine having to replace you sprite stepper motor and the force you to buy the whole fucking extruder.
Or a printer advertised as completely open source but you can't change the firmware in it because the put a proprietary touch screen on it.
Clownery.
They all do that right?
@@fab7228 sorry just read your rant. If it was bad I’d say so. Check out my first k1 video the printer was terrible. No one buys my opinion and that’s the end of it. I review the printers that are sent to me, some are good some are not. I also don’t disagree with you regarding longer term support. If the printer was trash I’d be saying just that it’s pretty simple. Let me guess you’ve been burnt so your way of venting is online while sitting in your underpants in a mouldy apartment. You do you believe what you want, I’d guess you won’t and you’re come back with some sort of clever reply.
@@TheRealSamPrentice Man, you did not address one of the point regarding anti consumer behavior.
And you dare insult and demand for a "smart answer" after your moronic and false and clique statement "no one buys my opinion".
What a 🤡.
Might get this for the lulz
Crack on
That is a very strange coreXY printer.
It’s XZ the devil is in the detail
Bambu is bettter
Sweeping statement! I’ve got many Bambu printers this is different and a first for the xz market.
If you want to pay the expensive price, yes
Ender 3s are junk. By the time you replace every part, because its not if but when it will break, you've paid for a decent printer. I would be surprised if this one is any different.
I’m sorry to say… it suspect in your case it’s… user error
k1 is still more interesting. Meh.
The max is too
@@TheRealSamPrentice max has other bed size so it isn't a fair compare. And it is slower then usual k1 though. I didn't see xz price yet, but if it is ~500$ then k1 definetely the better option.
But it’s $150-200 more expensive than v3. I don’t think that’s a fair comparison.
@@lukas74339 it depends.
I've bought k1 for 11.11 sale for 352 euro, there'll be more spring and summer sales. So I think there'll be offers ~400-450$ for k1
@@lukas74339
New ender is 390$ and k1 is 500$ at oficial store for now.
Even with 110$ higher price I'ld preffer k1, cos have lots of doubts about new ender. The only thing which is interesting is it's printhead - looks like similsr to k1c. But I still don' like that proprietate nozzle, lol.
BTW, I've boght k1 at 11.11 sale for ~350 euros)
Paid review?
Sponsored by pcbway which is in the video.
Over complicated bed slinger printer ,i just not seeing any benefits to having such a system for z...
It’s just an option it’s not really complicated and really it benefits z hop because like you say the z is the least important axis on most printers. We will have to wait and see but the rumour is there is a larger version in the works
@TheRealSamPrentice hmmmm let's wait and see what is coming .
For me, I'm already thinking about getting the new k1c cuz it's more promising. I'm involve with Corexy design cuz my ender 6 (mod version...)