How To Use A Bearing Separator
ฝัง
- เผยแพร่เมื่อ 27 พ.ย. 2018
- Removing a press on or close fit bearing is near impossible without the right tool. The ToolPRO 12 Piece Bearing Puller Kit fills exactly this need.
In the kit you will find two bearing separators, a yoke, leed screw, puller legs in two different lengths, and two different sized extension legs.
Begin the task by choosing a bearing separator the correct size for your application. If your bearing is fitted snugly to another surface, you must locate the mating gap - and open your bearing puller wide enough to surround this. As you tighten the nuts on the bearing puller - the tapered edges will close in - and open a gap behind the bearing or race.
Once the space behind your bearing or race is wide enough, and your bearing puller has enough purchase - you can begin to remove it from the shaft. Select two of the same length puller legs from the kit - use the shortest legs possible to clear the shaft. Thread one end of the leg into the puller, locate the yoke over the other ends - and tighten the nuts onto the yoke.
Now thread the leed screw through the yoke until it contacts the centre of the shaft; and tighten the leed screw to gradually pull the bearing free. A quick squirt of penetrating fluid here will help the process along.
Eventually you will be able to work the leed screw by hand. So be ready to catch the bearing, race, and bearing puller as it comes free.
That’s all there is to it! When the need to pull a bearing arises, you’ll be glad you’ve got the ToolPRO 12 Piece Bearing Puller Kit.
---------
Supercheap Auto Website: bit.ly/1FpfKkw NZ: bit.ly/2rK6Lg5
TH-cam Channel: bit.ly/2sjZ92q
Like us on Facebook: bit.ly/1Ry7HuN
Supercheap Auto Blog: bit.ly/2skbVOE
---------
Watch our latest and greatest television ads, Check out our how to videos, product videos or learn how to check it! - ยานยนต์และพาหนะ
Interesting to see how these work, thanks.
Well that was too easy. I'm going to have to look at another video where they are struggling like i'm sure I will be. LOL
Thank you for sharing you made it look so easy ...
I just bought a set of these bearing pullers from Amazon (not Supercheap Auto). As I began to pull the bearing after tightening the tool onto the bearing race, it broke two of the tips of the crappy puller and they flew across the shop. I removed it all and boxed it up to return to Amazon. Got my angle grinder and put a slit into the bearing race (perpendicular to the shaft). Then used an air chisel to "push" it off in about 5 seconds. Guess I found out I didn't need another tool.
Thank you! Your comment made made me realize that I don't need this thing at all. I can just use my $20 Harbor Freight angle grinder and a thin cut off disc.
Thanks for saving me $40 to $50!
@@matt697845 I can go one better. . . if you have a torch, there is no better or faster way than to hang the axle upside down and give it a spin. Heat up the inner race QUICKLY with the torch and the race will just fall off. You must do it quickly though, or you will end up making everything HOT.
Great Video!
We are bearing puller manufacturer in China and focus on export wholesale. I think this video is very good! It teach many people how to use bearing puller. 👍👍
Taiwan #1
CCP evil, free Hong-Kong
I do not trust Chinese manufacturers because they claim parts are forged when they are cast. It's hard to know if they are going to sell you what they state on paper.
Bravo....who ever made the ad.
Really needed the bearing splitter kit, tho at $127, was a bit much for just 1 useage, so online, same thing, same brand, $48, job done, thinking maybe the oldest son might use it more
Will this remove the wheel hub also?
Aonde podemos adquirir esta ferramenta,
How much is this
I need these for power tool repair!
Same bro Mitre saw bearing
Yeah milwaukee and their bearing issues
I want to get this, how much is the amount
Donde lo puedo comprar
Best to Dremel or grind the side of the bearing to give the tool a great grip
It's a video it's great
Good instruction video but quality of tools these days is below par for an automotive store and price tag.
For same price you can now buy hydraulic pullers and/or better quailty ones.
Guess i expect a lot when i pay money for tools not for them to explode cause of crap castings
I agree quality in metal is garbage
You should put a small steel cilinder between your puller and your shaft so the center of the shaft doesn't deform
good point.
How much
Price ?
Quite simple
Супер 👍
My largest bearing separator has no holes to attach two screws to pull.. How do I pull it once it hugs the bearing?
It may be for a shop press. You can wedge the puller under the bearing and rest the puller on the plates or bottom of the press then use the press to push the stem/rod out while the puller and bearing stay stationary.
@@Indy509 Thank you. I could never figure it out
@@Indy509 thanks this is why I looked up the video so extra thanks
@@Indy509 Axle bearings case in point as the axle is to long to use the legs.
Hello Supercheat Auto, I would like to make your video be my educational book's reference to be placed on QR Code link.
Ok so we pulled it out...how do you put one back in without a press
Heat up bearing....put in oven for a bit then slide on.
@@Ka_Gg can confirm not to do it that way
@@tbonetbone4159 why not?
@@tbonetbone4159 I've put them in a freezer when sliding them into something and it works. Figured you could do the same with heat.
You can use the wheel hub grappler tool.. gotta ask around your auto stores and see if they rent it out.. it’s kinda pricey, but you get your money back when you return it..
How much is this ....
If u sele give me one pear is this
Please l want to get this tools how much I need answers
3
Please l need this, how much nd how can I get it
यह भारत में कहां उपलब्ध है, हमें इसकी आवश्यकता है
Eska naam kya he bhai
Хачу купить
Dialecto en español
eas scenario
How mutch
$104.99 AUD
$