[How To] Install Aftermarket Rearsets
ฝัง
- เผยแพร่เมื่อ 1 เม.ย. 2017
- A quick guide to installing aftermarket rearsets.
Skip between 5:22 and 10:15 if you're not adding the rear brake light sensor.
Bike featured: 2011 Triumph Daytona 675R
AP website: www.attackperformance.com/
Woodcraft spring link: bit.ly/2ow76xE
Pressure banjo bolt is M10 x 1.25 pitch thread
Intro music credited to: www.bensound.com and Instrumental produced by Chuki: / chukimusic
--------------------------------------------------------------------------
Your simple guide to DIY repairs on motorcycles
/ howtomoto
/ howtomoto - ยานยนต์และพาหนะ
Your video is more descriptive and detailed than even the STG, JP cycles, etc how-to vids. Thanks alot!
Very neat and highly informative video! 👍🏻
Thank you! 🤙🏻
Thank you for this video; it was a good reference when I installed my own rearsets.
Glad to help, Thanks for the feedback!
I just bought a beautiful 2013 gexr600 and I want to change the stock rearsets on it. I’m not mechanical minded at all but these vids are so helpful. They make me want to try at least. Good job. 👍
Really needed this, thank you!
Very informative video! 👍🏼
The most impressive part of this video was not losing that circlet clip in the grass at 12:39
Hey mate thanks for the video! Helped me a ton installing them to a cbr1000rr 2007, but I am having issues the brake light will only come on once or twice and then stops working, I decided to bleed them again and the same happend, any suggestions?
Sir, whats the use of the spring? Recently replaced my rearset & just got tired of thinkin' whats it for. Please help, tnx
Yep while you lubricate the ball joint with the chain lube, maybe let couple drops fall on that chain :)
Chain has been replaced with a nice new shiny gold one. (but the old chain actually had plenty of lube on the inner races)
Thank u!
I liked the video, it helped a little.
I have an ABS cbr600rr 2011 and I find no video for my bike.
You're welcome, Thanks for the support
Where did u get the pressure sensitive banjo bolt and spring from
Fking hell thanks m8 I bought aftermarket stands for my cbr1000rr 2005 and it came with that kind of stop signal switch and didn't know where or how to attach it 😄👍
Glad to be able to help! :)
I like the music, who is it by? This video was really helpful. Thanks
The music is from a youtuber named Chuki Beats th-cam.com/users/CHUKImusic
I'm trying to find a replacement peg for my set like this why is it impossible? Then I find your video and bam found it
Where did you get that banjo bolt at?
I just typed in "pressure banjo bolt" into ebay. Make sure you're aware of what size and thread pitch fits your bike, mine was M10 x 1.25 pitch thread
Did the carbon fiber heel guards get scratched up from your shoes in the few days you were riding?
+ShadowChemos yes, i was wearing steel capped boots, not the best idea. My riding boots and normal shoes didn't scratch them.
What site did you get that banjo bolt from
I just went on ebay and typed "Pressure banjo bolt M10 x 1.25 pitch thread" but if you have a different bike, make sure you know what size and pitch to buy.
I have a question. I laid my 2016 ninja 650abs down last night and my only issue is the left side rear-set is bent in causing my shifting lever to be obstructed. How can i get another piece (just that one rear set plate) by itself
You have 3 options:
Find a used one at a wrecker
Buy that part from the dealer
Buy a full aftermarket set
Unfortunately, I don't think many people would be willing to sell the sets individually
So what is that thing called on 10:31, I’ve been trying to find one for my bike and that specific part, the carbon fiber shield thing
I believe they’re called heel guards or plates. On eBay you can search just “carbon fiber rearsets” and you should find some.
JT King thank you!
the brake side was really helpful, the clutch side, yup, different animal to my bike haha, oh well at least it's the brake side I came for
Thanks, I try :)
what was the torque specs for the four bolts at 12:00?
The rearset to the frame was 27 N.m, and the heel guard/brake master bolts were 18 N.m. This was for a 2011 Triumph Daytona 675, be sure to double check for your model of bike.
Did you have a quickshifter installed? Couldn't really see. Great vid btw 👍
Yes, my bike came standard with a quick shifter (the 675R model), Thanks!
Alright, so it's a 2016 model? I got a 2012. Thanks for your reply 😎
If you can't tell by watching the video, never get one.
💝
Can I install this on Yamaha Raider?
I need to move back the brake back short legs hard to reach and be touching the hot pipe
Absolutely, as long as Attack or any other brand make a kit for your specific model. You can put aftermarket rearsets on most bikes.
And you dont remember on ebay for the particular one u have didnt want to do any splicing
If you're asking for a link, here is the one I used. But remember I don't know if it fits your bike. bit.ly/2KNFpu2
Jesus! That chain 🤦♂️🤦♂️🤦♂️
It's all gold now and new now
what's the point of fitting a $500 accessories if the basics/fundamentals of the bike are trashed??? ? (chain)
Ok i got a 2001 gsxr 1000