You should start a small company where you can make custom Carbon fibre products requested by customers...would make a great business with your excellent skills tbh.
@@G-G._ idk wtf capitalism has to do with his comment. He was complimenting the guy on his carbon fiber skills and saying he could probably make money with it. And there isnt anything wrong with capitalism. It drives innovation....if you make a.good product, or provide a good service you get ahead, if you can't then you don't. Everyone has a shot at doing so and if you are too lazy to do so then that's no one's fault but your own. Don't hate the world because of your inadequacies....
Nice upgrade! I feel that most people don't realize how much sandpaper will you use making something from carbon and how much time will spend on it) I even thought to add 30 minutes part with sandpaper only in my last video :D
And I have exactly same thoughts about carbon fiber. I'm not a professional, I just like it. And I'm glad that some people around the world think the same and make something not as a job, but just for fun and new skills
You should use a blowlamp (on each epoxy layer) to avoid air bubbles instead of the squeegee and plastic sheet. The result will be perfect and it only take a few seconds.
Emmanuel Figueroa Follow the same instructions as the carbon fiber but used forged carbon fiber there are plenty of videos of how to make forged carbon fiber and there’s even a company that sells forged carbon fiber squares already
hello, great work . I want to make something like your end plates. It is bracket that holds crash sliders for motorcycle. So it has to be very strong maybe about 4-5 mm thick. How many layers do you recommend and what kind of layers? Thanks for answer .
You're extremely skilled and the quality is amazing. But you didnt need to make endplates cus you were trying to put the original ones on backwards (wrong side). Plus the ones you made will create drag. And the uprights changed the wing angle so it wont make as much down force.
Great video and awesome techniques.. but I think you need more sanding before polishing .. the level of finishing before extension was better than after ( you can see it in light reflection)
Hello, Buddy! You are correct. I had to make the surface flatter. I wanted to finish quickly, so I made some mistakes. I was not satisfied with this wing. So I will make a new wing. It will use the mold to make the whole wing. Please look forward to the video!
I need some uprights 3D printed for a custom project. If there is any chance you’re interested, it could be a product you could bring to market, as I think there’s a demand for it. If you’re interested let me know
Awesome video ! Keep it up , good work ! Can you please make a video of making a similar looking rear wing from start to finish ? Including a mold etc . I've been looking on the internet for ages and there is none. The closest thing I've seen is an aero plane wing being made but with bad camera angles and No explanation. If you could spend the time on this , it would help alot of ppl out . ^_^
Hello, Buddy! It could also make an entire spoiler in a similar way to this video. However, I planned to build a spoiler using a mold. I think it will be simpler than this rebuild. Making a car spoiler is similar to making an aircraft wing.
you are very good at this you do very inspiring from here take some ideas to make in my cupra, upload videos lining pieces in forged carbon fiber greetings from Mexico
Hello bro! I've been too busy lately, and a lot has happened to me. I'm sorry for the video being delayed. Also, I am envisioning new content. I think I want to try many things. Please look forward to a great video!
Love the visual results. I think you should try out molding what ever piece you want to have in carbon. Even if it means you have to do all the steps in this video before molding. But once you have the surface you want, you can just take a mold with hardening molding clay, from the entire piece and lay your carbon into the mold, instead of onto an excisting part. I know i dont explain it very well (englisch is not my first language). But, there are a tonne of videos here on youtube, explaining the process. One of the biggest benefits to carbon, aside from stability and of course looks, is weight. And you defeat the whole purpose of that, with just adding carbon. Anyways, keep up the good work :)
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](http://i.ytimg.com/vi/YNWu1-r5HGo/mqdefault.jpg)
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](/img/tr.png)
![How to Make a Carbon Fiber Swan Neck Wing [DIY] (with 3D Printed Molds)](http://i.ytimg.com/vi/eq5fILj1TOM/mqdefault.jpg)
![How to Bake Prepreg Carbon Fiber Brake Cooling Ducts in an Oven [DIY]](http://i.ytimg.com/vi/d3SY8l3jbTo/mqdefault.jpg)
![How to Make a Carbon Fiber Door Sill with Logo [DIY]](/img/n.gif)
14:34 always gets me hahaha! Great job on the vid!
I had same reaction when that happens 😂
in all of his videos not one word said, and then out of nowhere the screaming marmot lmao i love it
I'm so glad I found this channel. I'm so inspired to try to wrap everything I have in carbon 😂
You should start a small company where you can make custom Carbon fibre products requested by customers...would make a great business with your excellent skills tbh.
not everyone is a capitalist pig. some people like having hobbies
@@G-G._ idk wtf capitalism has to do with his comment. He was complimenting the guy on his carbon fiber skills and saying he could probably make money with it. And there isnt anything wrong with capitalism. It drives innovation....if you make a.good product, or provide a good service you get ahead, if you can't then you don't. Everyone has a shot at doing so and if you are too lazy to do so then that's no one's fault but your own. Don't hate the world because of your inadequacies....
@@sinformant well said sir.
@@G-G._ I bet you are enjoying products and services that come from the capitalist market though.
@@G-G._ Thanks to capitalism they can also make money off of their hobbies...
I can't believe I just discovered your channel. I'm addicted to your videos
you guy are the kings of emitators, you are distroying original business
This guy is the king of "ehh I bet ebay has it for cheaper"
Yeah of 🍚
@@J.l198 where ?
@@J.l198 no rice here, he actually takes this car to the Nurburgring.
you are motivating me to start working on my carbon fiber hood 😅
More videos!!! Really enjoy the humor haha! Be cool to see a either a front splitter or diffuser next!
Your videos are always so relaxing! Keep up the great work :) Car looks amazing with that GT wing as well!
John Lawson ASMR. (Thank me later)
I'm from Brazil and I love your videos, congratulations.
Бро,ты МАСТЕР,мое уважение🙏🙏🙏👍👍👍
This is both educational and entertaining 🤣🤣🤣 MORE VIDEOS!!!!!!Great Work 👍
I really love your work, so detail oriented I just love the projects. Thankyou for sharing the process with us brother 🙏🏼
Honeycomb carbon fiber please 🙏🏻
Honeycomb cf would be the same process except with Honeycomb cf sheets.
@@ntrddragn it's harder to work with the honeycomb design likes to sink in or warp easier but end result nicer I have a wing out of honeycomb carbon
Nice upgrade! I feel that most people don't realize how much sandpaper will you use making something from carbon and how much time will spend on it) I even thought to add 30 minutes part with sandpaper only in my last video :D
And I have exactly same thoughts about carbon fiber. I'm not a professional, I just like it. And I'm glad that some people around the world think the same and make something not as a job, but just for fun and new skills
Even tho I sell carbon fiber parts, but I've got to say , amazing work done!!
Awesome video, thank you very much I’ve learned a lot of techniques by watching you.
Great videos.
Carbon fibre bike parts would be great to see 🔥
진짜 존경합니다 만드신 작품 하나하나 다 봤는데 이렇게 댓글 남기는건 처음이네요 너무 멋지십니다
I love your videos ! Thank for sharing 💪
부럽습니다 능력자 최고~~!!
Very cool and entertaining. Thanks.
You should use a blowlamp (on each epoxy layer) to avoid air bubbles instead of the squeegee and plastic sheet. The result will be perfect and it only take a few seconds.
Que bien me viene este video!!! Estoy restaurando un alerón de carbono y no tenía muy claro todo el proceso a seguir👍👍
If you make carbon wheel you are legends
Finally a new video! Make more bro!
정말 독보적인 컨텐츠네요 항상 잘 보고 있습니다^^
볼때마다 느끼지만 대박이네요..
Awesome work buddy keep it up 👍👍👍💪
Make a forged carbon fiber phone case plssss
he already made a video on phone cases. And also another video on how to make forget carbon parts. Combine them together and vuola.
Sure, but it's not forged carbon fiber it's just normal carbon fiber, do you understand what I'm saying?
Hello, Buddy!
I have no plans for a Forged Carbon Fiber case.
But if I have the chance, I will try. Thank you.
Emmanuel Figueroa Follow the same instructions as the carbon fiber but used forged carbon fiber there are plenty of videos of how to make forged carbon fiber and there’s even a company that sells forged carbon fiber squares already
드디어,새영상이!!
amazing videos!!, from Colombia keep doing well. my 3d printer help me a lot for create and save money ! you have very good videos and awesome ideas
영상하나에 얼마나 노력을 쏟아부으시는거지 ㄷㄷ
I like this clip
Huge respect for you for sharing knowledge sir.
Good job.
엔드플레이트에 고정하는 볼트에는 넓은 평와서를 한개 끼우면 좋을 것 같네요 엔드플레이트와 윙을 고정하기위해 볼트에 너무 많은 토크를 주다보면 볼트구멍주변의 좁은 앤드플레이트부분에 크랙이 날 수도 있어서 평와셔를 사용해서 넓게 힘을 분산시켜주는개 크랙방지에 좋아요🙂
형님 항상 대단합니다 👍
형 변태야 변태.. 이러다 집에 도장부스 설치하겠어..
Now you got a bigger table
😂😂😂😂😂😂
Wow great job !
excellent
Awesome and funny
Humble countries and humble people only deserve cheap goods
stop * hard breathing * you're giving them the power...
Ricers: Fellow ricers, it is our time to rise!
A hardened nozzle is great for a 3d printer. I use it to print petg with carbon fiber in it.
Great video!
Super boulot 👍
Nice job:)))
이번 영상이 늦게 올라올만한 작업물이네요 상판 길이연장 하는데 엄청난 노고가.. 이정도면 몰드만드는게 더 빠를수도 있었겠어요 ..ㅎㅎ 대단하십니다. 스포일러 엔드가 스프레드 카본이라 신선하네요ㅎㅎ 다음엔 드라이카본 영상도 올라오길 빕니다..ㅎㅎ
안녕하세요!
저도 작업을 하면서 느낀 것이 몰드를 만들어서 새로운 윙을 만드는게 작업 훨씬 간단할 거라고 생각했습니다.
간단하게 될거라고 생각했지만 실상 작업량이 엄청나게 많았습니다.
그래서 몰드를 만들어서 윙을 만들어볼까하는 생각을 하고 있습니다 ^^
Enjoyed the video, especially with no stupid commentary. One question, What is the purpose of the adjustment slots in end plates?
Should make your own spoiler from scratch. Please do a vid on that.
You can teach the repair to some carbon fiber broken after wrap
well done!
Mantap
Love your videos!! Do something in colored carbon
hooray for making the endplates
Nice job bro👌
dam thats some custom work right there. But that wing makes that bimmer look like trash!
But im no the one driving it LOL
SUPER)
Nice job!!!
you are the professional on video, 3D print & carbon fiber making, EXCELLENT
とても素晴らしい
Очень круто, по почему не увеличил боковые пластины? Можно было продолжить их вниз - это позволяет машине ехать более прямолинейно на большой скорости
you are amazing my friend
편집이 찰지네요
Omg this looks gorgeous... Greetings from Brazil ;)
Great job and seems like a lot of work and material cost and labor.. Might as well get a good one... But great job by you none the less!! 💪🏾
you can build a carbon fiber body kit
hello, great work . I want to make something like your end plates. It is bracket that holds crash sliders for motorcycle. So it has to be very strong maybe about 4-5 mm thick. How many layers do you recommend and what kind of layers? Thanks for answer .
You're extremely skilled and the quality is amazing. But you didnt need to make endplates cus you were trying to put the original ones on backwards (wrong side). Plus the ones you made will create drag. And the uprights changed the wing angle so it wont make as much down force.
e92 m3 에도 하고싶은데..ㅋㅋ 같은 윙을 갖고있습니다. ㅋ 능력이 부럽습니다. 브라켓도올리고 해야할게많네여.ㅠ
Great video and awesome techniques.. but I think you need more sanding before polishing .. the level of finishing before extension was better than after ( you can see it in light reflection)
Hello, Buddy!
You are correct.
I had to make the surface flatter.
I wanted to finish quickly, so I made some mistakes.
I was not satisfied with this wing.
So I will make a new wing.
It will use the mold to make the whole wing.
Please look forward to the video!
Forged carbon wing would be nice
Круто👍
Wow, that looks awesome, also this video was awesome
Ieojx niñas
오랜만의 영상 잘봤습니다ㅎㅎ
썸네일의 마지막줄 오타가 있네요
헛!! 생각지도 못 했는데 감사합니다!! ^^
@@ECOLAPStudio 별말씀을요ㅎㅎ
앞으로도 양질의 컨텐츠 부탁드립니다
장인의 빼빠질 최고! ㅎ
Make a carbonfiber carriage plate for ur 3d printer
I need some uprights 3D printed for a custom project. If there is any chance you’re interested, it could be a product you could bring to market, as I think there’s a demand for it. If you’re interested let me know
Awesome video ! Keep it up , good work ! Can you please make a video of making a similar looking rear wing from start to finish ? Including a mold etc . I've been looking on the internet for ages and there is none. The closest thing I've seen is an aero plane wing being made but with bad camera angles and No explanation. If you could spend the time on this , it would help alot of ppl out . ^_^
Hello, Buddy!
It could also make an entire spoiler in a similar way to this video.
However, I planned to build a spoiler using a mold.
I think it will be simpler than this rebuild.
Making a car spoiler is similar to making an aircraft wing.
What a mess! But it's worth it. What about vacuuming to press all the stuff together?
👍👍👍👍👍👍👍👍
Ótimo o seu trabalho! Deve levar muito tempo até ficar pronto, não é mesmo?
you are very good at this you do very inspiring from here take some ideas to make in my cupra, upload videos lining pieces in forged carbon fiber greetings from Mexico
What cupra do you have?
Awesome vidéo as always. Thanks for sharing your knowledge. Could you make exterior mirror cap Please ?
kkkkkkkk
muito showwwww
inclusive as brincadeira que fizeste nas
gravaçoes
Love the videos, keep them coming!
Next time Maybe a Vortex generator haha
Brass nozzle is not good with metal filament, you need steinless steel or titan nozzle!
Нормально!
Can make it on the Hockey skate?
:joy::joy::joy::joy::joy: 18:37 too nice ...
Damn, keep growing more n more
Hello bro!
I've been too busy lately, and a lot has happened to me.
I'm sorry for the video being delayed.
Also, I am envisioning new content.
I think I want to try many things.
Please look forward to a great video!
You just made a heavy wing even heavier... Resin rich.
Don’t you flame the resin before applying to get bubbles out?
How to make a bi fold flexible wallet of carbon fibre fabric
형 제 차도 가져갈께요~
Love the visual results. I think you should try out molding what ever piece you want to have in carbon. Even if it means you have to do all the steps in this video before molding. But once you have the surface you want, you can just take a mold with hardening molding clay, from the entire piece and lay your carbon into the mold, instead of onto an excisting part. I know i dont explain it very well (englisch is not my first language). But, there are a tonne of videos here on youtube, explaining the process.
One of the biggest benefits to carbon, aside from stability and of course looks, is weight. And you defeat the whole purpose of that, with just adding carbon.
Anyways, keep up the good work :)
Can you link those videos please?