MOD GUIDE: Elite 2.0 Motoblitz
ฝัง
- เผยแพร่เมื่อ 26 มิ.ย. 2024
- The Nerf Elite 2.0 Motoblitz is one of the better releases from Hasbro in a while, combining a Rayven with a master-keyed air blaster up front. That being said, there are some simple mods, that can take this flywheeler to the next level.
Featuring a custom 3D-printed cage, Fang ReVAMPeds, and Daybreak flywheels, this 2S build will bump Performance up to HvZ or Superstock levels. Additionally, the "Blitz" can be easily modded with a simple turn of the screw, allowing for a more powerful scattershot panic button.
As always, we try our best to make our guides "crystal clear," so let us know if you have any questions so that we can make corrections and improve our tutorials.
Get the Nerf Elite 2.0 Motoblitz at select Targets and on Target.com:
www.target.com/p/nerf-elite-2...
Want to get started? Save 10% with a complete Motoblitz mod kit:
outofdarts.com/products/elite...
All other mod parts and accessories are available on the shop here:
outofdarts.com/search?q=motob...
FAQ & Corrections:
-If you have any questions about products we sell on the shop, don't hesitate to shoot us an email: orders@outofdarts.com
-
0:00 Opening & Introduction
0:39 LiPo Safety Brief
1:01 Materials & Supplies Needed
2:39 Tools Required & Recommended
4:07 Included in the Kit
5:17 Blaster Disassembly
8:00 A Note on Flywheel Spacing
8:44 Blaster Demolition - Right Shell
12:22 Blaster Demolition - Left Shell
13:24 Blaster Demolition - Battery Tray
14:34 Blaster Demolition - Battery Door
15:34 Installing the Rev Switch
16: 45 Assembling the Flywheel Cage
18:47 Wiring the Flywheel Cage
21:44 Wiring the Rev Switch
24:25 Retaining the Wiring
26:18 Wiring the XT-60 connector
29:32 OPTIONAL - Installing the Short Dart Pusher
30:57 Partial Reassembly
31:31 Testing the Circuit
32:03 OPTIONAL - Modding the Short Dart Adapter
33:29 Firing Demo
34:07 OPTIONAL - Modding the Air Blaster
37:55 Reassembling the Blaster
39:49 Installing the LiPo & Alarm
40:37 Closing Remarks
Out of Darts, run by Luke, is a one-stop nerf-modding hobby shop. We carry all the supplies, tool accessories to make your modding journey easier! We create original 3D-printed blasters and mod parts with almost 100 Prusa printers. Check out our site below for guides, build lists, and resources.
Please subscribe for more!
tinyurl.com/jnuot5d
My web store:
www.outofdarts.com
Product questions?
orders@outofdarts.com
Follow me on Instagram for sneak peeks:
/ outofdarts
Edited by J Perry Heun, Out of Darts Video Editor - บันเทิง
Want to get started? Save 10% with a complete Motoblitz mod kit:
outofdarts.com/products/elite-2-0-motoblitz-2s-mod-kit?variant=40250915651626
Also, if you have any questions about the build, feel free to leave us a reply to this comment or email us: orders@outofdarts.com
Help my Moto blitz barrel is of and I don’t know how to put it back on thengun
I wish you or somebody else designed motor cages with better vibration damping. Look inside an electric razor.
I really appreciate the fact that you’re using tools that might be more common/available around the house.
Okay, the dots for lining up the motors is cool. Never thought about doing that (since I just line things up automatically), but for new people that's a great little reminder!
Also, I know I don't have the time for it, but if you cut off the air blaster barrels toward the base, I think you could arrange to have three mega (two tanks per) or two Mega XL (three per). Effective? Debatable. Fun? Of course!
"MOD GUIDE: ELITE 2.0"
Never thought I'd see the day.
You and me both man. . . .
Based on what I’m seeing, it is almost as if the Hasbro engineers were planning on people modding. The perfect place for the rev switch and the extra deep battery door both features make modding much easier. This blaster also breaks with other Elite 2.0 blasters in that there aren’t any clips or glue holding the shell halves together.
I've been hesitant to dip into electronic mods. The only one I've really wanted to do was the motoblitz. Can't believe you made such a high quality vid for it. Thank you!
the silver sharpy for where you are cutting was super helpful, you should do that more
Thanks!
I wish I had this video back when I was modding my own motoblitz, but alas, I was impatient and went at it solo. Definitely spent a lot of time figuring this out, but I did get it done in the end. Ended up making a 3d printable battery door as well that can fit a 3s.
Do you have a file for the extended battery door?
I love watching your mod guides despite knowing I’ll never have the money or supplies to do so 💀
For the screw organization I always just draw a picture of the blaster and number the screws to organize them
That's another good way to do it! Nerf used to print a large enough picture on their manuals that you could tape or number the screws there. Alas, they've stopped doing that in recent years.
Got my parts in today to mod two of these blasters. First one is done and I'm loving it. In my case plugging the small holes in the shotgun barrels made tight fitting darts pop out of place while pumping up. Removing the hot glue and using a pick to open the holes up fixed this issue. Two full turns on the relief valve screw allows 12 pumps before air release. This didn't result in a big gain and is about as far as I'll go until I see someone else testing the limit. Thanks Luke .
Nice mod guide...definitely watch it again when I get my moto-blitz & a mod kit from Out-of-Darts ! Thanks Luke !!!
Thanks again for this Luke. Have to admit that I experienced more than reasonable anxiety from watching you put the shell back on and seeing the trigger spring out of place at 38:11... I'll send you my therapy bill. 😝
Finally picked one up and excited to mod for the first time in about 2 years! Thanks for the vid mate!
the attention to detail is amazing
I can’t believe these vids don’t end with a firing demo at a target or something once it’s reassembled. I know you demonstrate that it functions towards the end but there’s something unsatisfying about not seeing it actually used.
We appreciate the feedback! This video was a bit of a rush to film before Luke went to his family vacation. We'll try our best to include firing demos in future tutorials
nice to know there's already mod guides for the motoblitz!
Hey, really enjoyed this mod guide, (great work as always 😁) and one mod that I’ve actually been thinking of developing but something I would love to see is a strayven integration, nit in the traditional way (cutting up a rayven as a stock for a stryfe) but butchering a stryfe to use as a rayven afterburner, or a similar integration with a separate blaster since the rayven isn’t the most available blaster anymore.
Many years ago I bought a wire stripper like the one used in the video. I use it a few times a week, so it's a very worthwhile purchase if you don't have a pair.
Hmm, if you have a Motoblitz with a busted shotgun thingy, consider sticking the guts of an old SpeedSwarm into that cavity to give yourself a rotary front-gun, I have a feeling it'll fit really easily to create a one-of-a-kind modded blaster...
Excellent guide, think I might do the same to mine!
Eres un Maestro 👨🏫 🎉🎉🎉
Tip: add a quick firing demo + chronograph at end of mod video
Just scored one of these on Amazon for $25! I think I'll use the sight tube for a laser type light. maybe integrate with the rev switch. Thanks for the great videos!
Great mod guide as always Luke!
Does that new cage fit other Elite 2.0 blasters? Like the Turbine or the Phoenix?
Was bummed i missed the sales on these. But then i thrifted one two days ago for 5.99 cdn . can justify buying the kit now lol
I wish that air tank can be modded to take mega XL. What a missed opportunity by hasbro.
34:48 Did you see that ghost flip the mag release trigger out?
Informative and punny.
Still dying to see an afterburner setup for this
Very useful.
Thanks for clarifying about the short dart pusher and mag adaptor. I reckon that I'll just make it so that I can transition from 'long-dart' to short dart by not glueing the pusher in. Also, another question. Does the mag adaptor work in the Infinus?
A Mighty Mama type thing in the scope would be neat
Luke!! Could cut down brass barrel inserts work for tightening up the individual barrels for the pump spreadshot portion of the blaster? You know what I mean, right? ;)
This makes me want to get into modding
please do a modding guide on the infinus
How hard would it be to unclip the white part of the shell, so the air blaster is completely removed?
Not particularly hard. It is a separate bit of plastic. Your main challenge would be to fill in the gap in the shell that leaves.
I use a magnetic plate for screws sorting
Im new to all this lol i plan on doing this i wanna do short darts. But for my understanding does that mean i can use dart zone half darts ? If i use the 39 size ?
Hey, thank you so much for doing a mod guide on this blaster! I plan to get my own soon and was hoping you would have a video. 100 stars out of five!
As I already have 3s Kraken 130 motors, I was thinking about using those instead. Will I still be able to follow along with this video?
Yes, the mod guide should be similar enough to follow along for a 3S build. There may be a challenge finding a battery that fits, but I'm sure Luke will be making an extended battery door soon anyway.
Cool! I actually use 3.7 volt lithium ion AA size batteries. I run those in my 2s stryfe. That way I can run both 2s and 3s!
@@Si-Fi.51 don't use those low spec batteries on high spec motors like that.
@@darkwhite1259 what did you mean by low spec?
@@Si-Fi.51 using lithium ion batteries is unsafe with high current motors. the batteries you use simply can't safely and reliably supply our hobby spec motors with the current they need to work properly. look up any video on IMRs vs Lipos and you will see what i mean
Amazing
Hey Luke could you do a video guide on painting the motoblitz?
almost done modding mine. still making my extended battery door.
Cool 😎
Are two pieces of Motoblitz shell glued together like other elite 2.0 blasters?
I know this might be an odd question. But is there any way that I could remove the shotgun portion? I doubt there is but if there is please let me know
I mean it's a separate piece of plastic. You may need to pull some clips, but the white "blitz" part should come right off.
I just leave the screws inside the shell when I’m modding my blasters.
It's cool but I kinda wish the front iron sight didn't block the scope, and I wish the scope sat a little higher.
is it hard to do this mod? or not (I have also never done a mod before :/)
Any chance you'll be designing/printing an expanded battery door for this? I've moved to all 3s builds besides one (old build blade 180s/DRS cage in a Cam that I primaryfor HvZ) and would like to cram a 1000mah-1300mah 3s in the Blitz.
Unfortunately, no. With the vast array of new blasters coming out this summer, we have no current plans of designing a battery door for the Motoblitz.
@@outofdarts that's unfortunate but understandable. Thanks for the reply!
And I'll figure something out because I have some fun plans for this one. 🙂
it can use 25rd drum magazine?
Such a great video, your store is out of the batteries though 😢
We're working on getting a new supplier for LiPos soon. Hang tight!
@@outofdarts awesome, I have like four blasters in waiting! 😁
Request for a Alpha Strike Flyte mod guide
Hey there I'm never done modding before and I'm limited with money and really don't want to mess up. do you know any good blasters to start off with?
Hi! If you're new to modding, Springers are a great and budget-friendly option to start with. The Adventure Force Nexus Pro has a lot of great mod parts to install, as well as spacers and upgrade springs to tune your performance.
If you're ready to jump into an electronic mod, a semi-auto flywheeler like the Elite 2.0 Motoblitz, Adventure Force Spectrum, or Elite 2.0 StormCharge is a great option to go for. We'll be making an upgraded flywheel cage and some other mod parts for that last one in the next couple weeks, so stay tuned!
A firestrike brass it , get a 5 dollar spring from the auto parts shop , be hittinh hard . doesnt need to be brass, anything to fit the dart tighter
Yo dude
Stock flywheel cage looks like the Nerf Halo MA40. But I can't tell if it's compatible.
It might be, but we already have a cage designed specifically for the MA40 on the shop if you're looking to upgrade.
Is this worth doing if you want to keep it shooting long darts?
Yes! In fact, full-lengths will perform better (at the expense of accuracy), giving you higher FPS at the same crush.
What mods would you recommend for hitting around 100fps?
The lowest-FPS cage we've tested for the Motoblitz hits around 111 FPS with full-length darts. Just click the 42mm cage spacing option through the link below:
outofdarts.com/products/elite-2-0-motoblitz-2s-mod-kit
Could you also just overvolt the motoblitz by getting a 6 AA battery holder and simply stuffing the wires into the original battery terminal thingies?
You could theoretically do that. However, you still might need to rewire the blaster because the PTCs and other circuits in the blaster are expecting only the 6v nominal that 4 AAs provide.
Any idea of the FPS after this MOD?
Is the short dart necessary?
No. If you want to shoot full-lengths, you don't need to install the short dart pusher and talon adapter.
My air tank doesn't work anymore after not even a day, is there anything I can do to fix it?
Still
V twin mod guide?
where can i purchase a lippo battery
If you're in the US, our site is a one-stop shop for LiPos that fit in blasters!
Hey so what exactly does the Lipo alarm do?
It is damaging to a lipo battery to discharge below a certain voltage . The alarm plugs into the balance cable and monitors each cell . If any cell falls below threshold , the alarm goes off.
@@jeffreybradley3736 and while i am at it is it safe to use this large lipo battery to any modded nerf blasters i have
If you're getting your motors and LiPos from us, you can find information about compatibility in the listings. Generally, you can run a 2S battery on 3S-rated motors (with lower performance). However, it doesn't work reliably the other way around, as the higher voltage will kill your motors quicker.
@@outofdarts can you run fang's on 3's ? I heard that you can.
@@timshooter8033 Running any 2s motor on 3s is possible -- Fangs are even recommended for some 3s builds. However, Fangs are not warrantied on 3s because the higher voltages drastically lower the longevity of the motor.
Hey! Can you pls mod the nerf Fortnite p90? To be faster and more powerful, thx man!
There Is a Problem with this blaster that no one on TH-cam has addressed yet. It does not except the 6 round magazines, the pusher gets jammed for some reason and doesn't fire the darts.
But when would you use a 6 round mag?
um the 6 round mags doesnt have plastic where teh mag detection button. if you want to see what im talking about grab a 6 round mag with a 12 18 mag and you can see the difference the blaster just isnt designed you use 6 round mags
go to exactly 7:24 the thing he is grabbing is whats preventing you from using 6 round mags
Now I know this blaster is screwed and not snap in place.
If these Lipo batteries are so dangerous, then why use them? There's gotta be something out there that's safer and comparable
They're only dangerous if mishandled, and their energy density really can't be matched in the hobby space. If you're really concerned about LiPos, we do offer a couple of IMR options on the shop which are protected cells.
Sorry I meant endware
I just wish Hasbro had painted both sides. It looks so plain on the left side.
If I do this I will need my brother’s help this time cause I nearly broke my stryfe
What about endeared
Sorry I meant endware
No firing demo?! After all that work?! Luke for shame
2nd
1444th
why so advanced