Must Have 3D Printed Mods for your Emax TinyHawk II FreeStyle and Insta360 Go
ฝัง
- เผยแพร่เมื่อ 2 ส.ค. 2024
- 🍍 STL and Creality Ender 3 Gcode
1drv.ms/u/s!ArfoCGHarfwKvzgzy...
Insta360 Go2 Horizontal and Vertical are now in the folder along with a new updated mount design for the original Insta360 Go.🍍
🍍 Gcode files are created for Creality Ender 3 Pro 3D Printer @ 100% Flow Rate using TPU.
All Gcode was generated at 100% Flow Rate. You can override the flow once you start printing on the “Tune” screen on your Ender3 if your roll of filament requires a higher or lower flow rate.
🍍 If you do not have a 3D printer and would like to have these parts printed. Just download the STL files from the link and attach them to an email to Brain3D.co@gmail.com let them know the color you would like for each part. You can also visit their website www.brain3d.co/
⭐This is my choice of TPU Filament - amzn.to/41FL7XB
⭐My Printer Ender 3 Pro 3D Printer - amzn.to/3YbzLb1
⭐The Best Upgrade you can do to your Printer bed - amzn.to/3J1XDto
⭐Must Have PTFE Tubing - amzn.to/3mgqgtU
⭐WINSINN Dual Gear Extruder - amzn.to/3ENwGqy
⭐Upgraded Tempered Glass Plate with Bed Clips - amzn.to/3ZiOUsA
⭐0.4mm Nozzles I use - amzn.to/3y4Tdvk
😁Other Parts you might want
⭐Ender 3 Pro Glass Bed Clips - amzn.to/3SCDzAV
⭐Spring Clip to hold filament end on roll - amzn.to/3ZyIrcn
⭐Long Cotton Swabs for wiping nozzle goo - amzn.to/3kvOOi8
⭐Plastic Razor Scraper Great for removing parts - amzn.to/3ZyUhTQ
⭐Heater Block Silicone Covers - amzn.to/3ZanEfv
⭐Upgraded Tempered Glass Plate with Bed Clips - amzn.to/3ZiOUsA
⭐0.4mm Nozzles I use - amzn.to/3y4Tdvk
⭐My Printer Ender 3 Pro 3D Printer - amzn.to/3YbzLb1
⭐Emax Tinyhawk Props - amzn.to/3IEzaJi
⭐Emax Tinyhawk II - amzn.to/3EJ7vW7
As an Amazon Associate, I earn from qualifying purchases.
I receive a commission (at no cost to you) if you make a purchase using one of the affiliate links.
🍍 It has been brought to my attention that Banggood Has started producing my designs. I did not license them, and they did not contact me before using it commercially. So I am not making anything from it. But if you would like to buy one this is the link.
www.banggood.com/URUAV-Frame-...
Facebook / pineapple22productions
Instagram / pineapple22productions
0:00 Must Have 3D Printed Mods
0:15 Arm Guards
1:42 Antenna Tube
1:13 Battery Box
1:20 Installing Battery Box
2:49 Box with Camera Mount and XT30 Connector
4:33 Printing Support Removal
#Pineapple22 #EmaxTinyHawkFreeStyle #Insta360Go #TinyHawkUpgrades
Very nice my man. Thank you
Wow man seriously awesome stuff! Really great video quality, information and video editing! Keep it up! I subbed :D
Thanks for watching and subscribing 🍍
man you are a legend. Love my quad but this will make it even better. Gotta love this community
very nice mods. Thanks for the Designidea and the files. I love you :-)
Thanks for the support 🍍
After i got mine, i will create a prop guard too.
Thanks for these stls!
Great job
Glad you like the designs! Thanks for watching 🍍
Great video, great stuff you did with the 3d-printer👍🏻
Thanks for Watching 🍍
thanks for the STL files!
Thanks for Watching 🍍
Thank You so much for your work.
Downloaded and printed your files - work like a charm. Also created some camera mounts that fit your battery cover for other cameras is own.
So - Thanks for sharing !!!
Thanks for watching 🍍
The THFS2 has a warm spot in my heart. Its nice to see someone putting out support for it. I wish a company would put out a similarly priced package with slightly better components, mainly the controller, the non replaceable antennas and proprietary motors. The THFS2 is how I got into the hobby even though I've moved on. There was a time I would have really been excited for the mods you have came up with. Those days are done and I'm not going back now that I know what I do, but this thing you're doing is really nice and will benefit many people I'm sure. Thank you for joining the hobby. We need more like you. :-) Have a great one!
The antennas are definitely replaceable though lol
your the man dude i really needed the battere box thank you so much
I came here wishing that he had fixes for the dangling antennas but he improved in those fixes. Awesome mods. I'm printing them out right now. Thx for explaining how to take out the sports.! You got a sub.
Thanks for Watching and the Props 🍍
Awesome! Great designs!
Thanks for Watching 🍍
Thanks, buddy! I needed those skid pads and might just add some more mods
Thanks for watching 🍍
@@Pineapple22 Hey should the U-shaped antenna holder go between the spacers and screws or is it meant to fit over the spacers?
@@Blakeaholics It fits over the standoffs (spacers) you have to stretch it over the posts. 🍍
Awesome ideas!
Brilliant! So good
the battery box with the XT30 and balance connector holders is the shit! thank you so much Subbed and waiting for your next amazing design thank you
That is my favorite one as well. Thanks for Watching 🍍
That was awesome ideas . Would love these
If you do not have a 3D printer I have a link in the description to Brain 3D so you can have them printed. Thanks for Watching 🍍
@@Pineapple22 thanks buddy 🤙
Awesome dude
Great info! I need some of these for my Freestyle2!
Thanks for Watching 🍍
Awesome!
Great video!
Tiny Tank 2 freestyle.. I love it!! I subbed too. 👍
We might need to Trademark that Name 👍🍍
That battery guard is nice! Wish I'd printed it yesterday before I ejected a battery and the prop cut the casing open.
Time to Start Printing! Don’t forget to checkout my updated Insta360 Go Mount. Thanks for watching. 🍍
This is epic! Thank you man. Good lord I need a 3D printer.
Thanks for the props. If you don’t have a 3D printer I have a guy listed in the description that can print the parts for you. 🍍
THANK YOU SO MUCH :)
Thanks for Watching 🍍
Great stuff!!! Awesome ideas!!! Love it can’t wait to print these!!!!
Thanks for Watching 🍍
@@Pineapple22 what type of filiment did you use?
I use SainSmart TPU 1.75 I have good success with it. You can find it on Amazon or Race Day Quads sells it.🍍
@@Pineapple22 Im sorry to bother you, what printer settings do you recomend with this model? Im very new to printing, I have a CR6 SE from creality. Thank You.
Start with setting your print speed low 36mm/s is my base and can go slower on smaller parts. Do the initial layer at 15mm/s. You will need to have supports in most of the parts and I normally set my support Overhang Angle to 60 to start you can get away with 80 as a maximum. Set your Support Interface Density to at least 60 and I like Triangles as a pattern I have found they pull off cleaner. Temp for the SainSmart TPU I use is 210c and Bed Temp of 40c. I normally use 6.5mm for my Retraction Distance and 25mm/s for the speed. This should get you close. Let me know how it goes. 🍍
really cool
Thanks for Watching 🍍
thank you!
Thanks for Watching 🍍
Thanks great video
Glad you enjoyed it. Thanks for Watching 🍍
Thank you.
Thanks for Watching 🍍
Thanks for making this man! I just wanted to ask you if you have any recommendations for a better freestyle micro quad?
I have recently purchased a BetaFPV 85X. My first flight was great. It uses a 4S which give is more punch. After my first flight I took it apart for some modifications to fix some things I was not happy with out of the box. Stay tuned for my Video on it coming soon. Thanks for watching 🍍
Thank you for this video and print files. I’m just this minute printing a battery holder for my Tinyhawk. Just wondered if you’d consider designing a battery box with a mount for the Runcam Thumb. It’s powered off drones as it has no internal battery?
Thanks for watching I have concentrated on other quads and have sold my TinyHawks. You are free to use the files and have someone change the mount. 🍍
Great video and good design with the XT30 battery holder.
I am thinking of getting it and doing the same modification.
Do you think it would be possible to replace the Insta 360 camera with a HD recorder such as the Caddx Turtle V2 or Rancam Split?
Have you considered such a setup?
The only problem with that type of cameras is the circuit board they have to be connected to. I don’t think there is enough room on board for that. The Insta360 Go is light and has stabilization built in. The TinyHawk FreeStyle is a great quad you will not be disappointed when you get yours. 🍍
Love the prints thanks for putting them up what length motor screws did you use for the skid pads
You can use the stock motor screws on the pads. They are only two layers thick and the TPU compresses. Just don’t overtighten them snug is good I have never had one come lose. 🍍
@@Pineapple22 ok cool I wasn't sure if they would hold thanks so much for your reply and for your awesome upgrades on the freestyle I love this hobby so much and people like yourself add so much more enjoyment to fpv. Happy flying
I really wanted to like this video but it was already on 420 likes and didn’t want to ruin anything. Cheers for the info!
These look awesome. Do you do any printing yourself or do I have to get someone else to print the parts?
To get the parts printed there is a link in the description to a reputable source. Thanks for Watching 🍍
Awesome work thank you for the files. The company I'm using to print these are asking for the infill percentage, what would you recommend?
Thank you for the compliments on my designs. I use 80% infill on these parts. Thanks for watching 🍍
Man seeing that gray mount makes me want to buy a tinyhawk, but i just bought 6 550mah tattus for my tinygo which would be a bit to big, guess i'll have to make my own if i get one.
The 550 dimensions on RDQ are 63x16x12mm and the battery I am using the 450 95c is 62.5x16.2x14.7mm so it should fit in there good enough. I might have to by a couple and give it a shot. Thanks for Watching 🍍
Like your stuff! What 3d printer are you using? I'm trying to print a case for a different camera.
I am using a Creality Ende3 Pro printer. I modified is slightly to print TPU. I am working on a video with the modifications I should have finished in a couple of days. Thanks for Watching 🍍
Nice job...MEGA ...thanks:
to keep it more light...get some holes in your case ;-)
Thanks I will look into that. 🍍
what's the all up weight now with all the TPU? do you feel the additional weight a lot?
The total Fly Weight for everything including the Insta360 Go is 117.74g. I fly with Tattu 450 mAh 95c-2S that weighs 27.49g (included in total) I am not sure what the 1S Batteries weigh.
Without the camera I don’t notice any difference in how it flies; with the camera you know it is there and your flight times drop but handling with the same PID’s is good. The FreeStyle does make a good filming quad for such a small machine. I prefer it over a CineWhoop style when it is windy.
I am modifying the mount to hold a Caddx ND Filter which should help the Insta360 Go cameras quality. I will do a video shortly about how it works out. 👍 Thanks for watching 🍍
The prints you made under the engine also fit on the Tinyhawk lll plus Freestyle HD
Thanks for the Info 🍍
Or looked carefully but they are not the same as the Tinyhawk 3 the model you have is different what a shame I just can't find them
Awesome video! I've printed the "Emax 30 Deg Tinyhawk II Freestyle Battery Box VTX Support Insta360 Go" and the "Insta360 Go Update Vertical" but it looks like it's slighly bigger and both pieces won't fit together ! Could you do any video showing how you create the mounts and the pieces, or update the box so it fits with the Insta 360 Go 2? Keep it up and thank you for showing us all your upgrades!
I have not purchased an Insta360 Go2 Yet but will when they come back in stock. I will make a mount this later today. Check back in the folder in the next day and it should be there. Thanks for watching 🍍
@@Pineapple22 Thank you so much !
@@juanpabloperez6182 Files are in the folder. 🍍
Can I still use the same screws removed from the tinyhawk or do i need to purchase longer screws?
The Factory screws work no need to buy longer ones the lip is very thin. 🍍
Awesome!!! Can you add a thin shield on the landing pads to protect dirt going in the motors
You are not supposed to be using the FreeStyle as a tiller! (sorry could not resist) I added a design with a motor protector on it and put it in the folder. I have not printed it but did a program for an Ender 3 Pro. If you are using a different printer, print it with the landing skid side up. I normally change the support interface density to at least 60% and sometimes 100% to make the part smoother. Let me know if you need any changes to the part. Thanks for Watching 🍍
@@Pineapple22 sorry what is a tiller? Thanks for the reply I will soon check out the part with motor protection :D
@@Pineapple22 ooh haha it’s a gardening tool 😂 yeah I know it’s not :D but a lot of times I accidentally make it dig holes into the soil 👨🏽🌾
is there anyway these are able to be bought and shipped really could use the antenna, battery box and arm gaurds?
Check the description box I have a company I just started recommending to printing the parts listed there. Let me know how it goes. Thanks for Watching 🍍
Good and tight on those housing screws is all well and good, but Gutund-tight ist besser😂.
Source: I worked for BMW Manufacturing and a host of other German companies most of my career.
These look great! Does the TPU print OK without support? You're quite an accomplished 3D modeler! What software are you using?
TPU needs supports like PLA or other materials. I use Cura Slicer Software which is free to use. The Battery Box need supports to hold up the roof when printing. My rule of thumb is if the angel is over 60° you will need a support. In most slicer software you can just drag the Gcode in that I have provided to see what type of supports you will need to make the parts. Thanks for watching 🍍
I printed the battery box/antenna support using TPU and PVA support. Its tidies up the drone nicely. When I asked what software you were using I meant what 3d modeling software not the slicer.
@@jamesmallard3386 I am using TinkerCad for the designs. Thanks again for your support 🍍
Do you sell the arm guards and the first battery box?
Yes I can print the parts send me an email Pineapple-22@outlook.com with what you need and the color. Thanks for watching 🍍
This video and the work you’ve done is awesome. Please send me a link so I can 3D print the battery holder and the 30 connector. I will find a friend local to 3D print .
The link in the Description has all the files. You can view them there and download the one you would like. If you have any problems let me know. Thanks for watching 🍍
Will these work with stock screws or will I need to buy longer screws to be able to use these different parts?
The stock screws work perfectly. Do not over tighten them when you install the parts.🍍
@@Pineapple22 Awesome, Thanks!!!
Id be happy if i could get my hands on a freestyle 2 here in the UK,, with out the goggles and transmitter
Checkout this FaceBook Group someone there will get you fixed up. facebook.com/groups/EmaxBabyHawkRandBrushlessMicros/?multi_permalinks=3201976350023839 🍍
I like to go onto thangs it's a free just like thingavurse but it has more options.
There are a lot of good sites out there that pull from all of the sites that one is good.
A battery box designed for underneath would be an awesome option if you could pull it off, I find personally that mine fly's way smoother.
The box will work on the bottom of the TinyHawk FreeStyle. Let me know which battery you have and I will remove the antenna tube and put the STL in the OneDrive. Thanks for watching🍍
@@Pineapple22 I'm just using the standard emax 450s 1s doubled up and other brands that are the same size, I often use it indoors with just one battery as well,
You haven't come across any prop gaurds for it by chance?
much appreciated mate!
The STL File and Gcode are in the OneDrive Folder. It is called “TinyHawk II Freestyle Battery Box Cover” this will mount to the bottom of the TinyHawk. Good luck with your upgrade 👍🍍
Thanks for sharing STL files! I've printed all, but I can't install motor guards: how did you installed them? exiting 5mm crews are too short, and other 8mm screws are too long so they damage motoros. Thanks!
I have always used the stock screws. Did you print them from TPU?
@@Pineapple22 no, PLA. it eats about 1.5 mm from the screws - so the remining screw part isn't long enough to reach the motors
@@Pineapple22 what printer settings did you use?
@@AlexLebed The parts are designed to be made from TPU that is why the screws will not work. The TPU collapses when tightening up the screws. If you have an Ender Printer the G-Code is on the cloud drive. I print TPU at 210 Deg C and on a part like this 30mm/s or slower. The print bed should be 40c Hope this helps you out. 🍍
@@Pineapple22 thanks a lot, I didn't realized I need TPU for this. Do you have recommendation for the particular TPU? I just bought a ender 3, because was inspired by your freestyle upgrades.
BTW, not a insta360 but an acceptable quality nethertheless on runcam split 3 nano + tinyhawk 2 freestyle th-cam.com/video/0toM5AQrsQQ/w-d-xo.html
What are the dimensions of the standoffs/spacers used for the antenna tube holder?
It uses the stock Emax Standoffs. They are 15mm tall x 4mm hex. The print is a round hole and will stretch over the standoff. If you have trouble getting the standoffs in the holes you can put the standoff in a nut driver and press it through the print. This video shows it th-cam.com/video/AZOuMWs_7w8/w-d-xo.html Thanks for Watching 🍍
@@Pineapple22 Thanks! Idiot me used PLA.. 😅
Sorry about that I will edit the description to print from TPU to be clearer. Thanks for the comment. 🍍
I dont see a file for the other 2 arm guard feet. You only have 1 type of file which only fits on 2 arms....
When printing the file, you mirror two of the feet for the other arms. Thanks for watching 🍍
My only concern is temperature management. Adding ventilation holes all around could help keeping battery cooler.
I live in Georgia and have not had any heat problems with the batteries. My 2S batteries never get warm but on my 5” quads the 4s and 6s do get warm during a hard flight but they are mounted with just a strap. Thanks for watching and commenting 🍍
@@Pineapple22 Must be my concern coming from the smaller quads, when I pull battery out it is quite hot when flying indoors. Outdoor in freezing temp it is quite ok still :)
Are you flying 1s or 2s? 🍍
I want to print the arm guard landing pad, but the file is only for two pads. Do you have the file for the other pads?
In your slicer software when you duplicate the parts just Mirror Two of them and it will make the set for the other arms. If you are using an Ender Printer the Gcode that is there will make 2 right and 2 left. If you have any problems let me know. Thanks for watching. 🍍
@@Pineapple22 I don't have a 3d printer, I send the files to a company that print 3d products for customers.
I send an email to the company to print it mirror
@@MartFPV Sounds Good. I am sure they will get you fixed up.
I cant find the other feet because when i look at it it wont fit on the other arms???
In your printing software you mirror two of them.
Thank you very much.@@Pineapple22
By far the coolest mods for the Tiny hawk!!!! Would you be willing to print and sell me these?
Brain 3D will print them for you their information is in the description box. Thanks for Watching 🍍
man wish i had a 3d printer
In the description there is a link to a company that will print the parts for you at a reasonable price. Thanks for watching 🍍
Do you guys know if the battery holder works with 550 batteries instead of 450?
Sorry I no longer have any of the TinyHawks so I don't have a way of checking. Thanks for watching.🍍
@@Pineapple22 The arm guards just work for 2 arms. Is there anything i can do?
@@_l_u_k_a_s_5922 When you print the arm guards you need to mirror two of them, so you have a complete set. You can do this in your slicing program.🍍
would you ever print and sell these for people?
Yes send me an Email Pineapple-22@outlook.com Thanks for watching 🍍
If you create a mount for the insta360 go2 let me know 👍
I have an updated Insta360 Go (original) mount I will post in the file link shortly.
Only if I had a 3D printer....
If you don’t have access to a printer send me an email Pineapple-22@outlook.com I can print what you need Pineapple-22@outlook.com Thanks for Watching 🍍
If you sold these I would buy, only because I don’t have access to any 3D printers.
Send me an email pineapple-22@outlook.com I can print what you need.
TAKE MY MONEY!!! Lol but really tho that first battery cover with an insta360 go mount at 20 degrees, can you print me one!!! I will pay.
Thanks for watching you can send me an email pineapple-22@outlook.com and I will get you fixed up. Thanks for watching 🍍
print these parts and let me purchase them from you bro
In the Description there is a link to Brain 3D. Send him an email and he will get you fixed up. Thanks for Watching 🍍
You really should make that battery top have less material. Sorry to say, but sir, that thing is a hideous monstrosity.
Also, I would trim weight off those frame pads. On a 5in drone, maybe you need that type of protection, but i feel like those pads just look big in comparison to the drone. All you really want to do is protect those frames, so something super small and thin would work just to keep the frame a little off the ground.
The ideas are cool and always invent, but I think you should try to optimize on the weight more.
Sorry you are not a fan of my designs. You are free to download the STL files and modify them for your needs. I look forward to your video with your designs for the TinyHawk FreeStyle. Thanks for watching 🍍
Sell these man
I closed my 3D printing business but I can hook you up send me an email Pineapple-22@outlook.com with the color you would like and angle. Let me know if you want a Vertical or Horizontal Camera Adapter. I can print the camera adapter a different color then the box or both the same. Thanks
@@Pineapple22 thank you so much sir I will
@@timmytson1 👍 🍍
I don't want to bug you if you aren't interested but I would buy a set as well
@@thenewfire Please send me an email pineapple-22@outlook.com Thanks for watching 🍍