A great video as always. I like the new style, that is, you telling what you're going to do and why. It makes it easy to follow and understand the diagnosis process.
I'm considering to buy an oscilloscope for jobs like this, im learning and willing to go the extra mile. Whats a good brand and what specifications should it have thank you.
i recently saw a big American youtuber Louis rossmann with millions of subscribers refering your video to fix a ps2 with no display ...your work is highly appreciated
Another great video like always can you make more videos with the UART because not everybody can afford a oscilloscope it would be great to see videos using the UART
Thank you for sharing and showing us your initial diagnosis matched the syscon reading. Scratching the board is a liitle bit risky for novices but it saves the hassle of removing the Nec Tokin. I have seen you doing it before in other videos on the fats model. I think you have problem with uart as wires too long. I keep mine short and simple with plugs.
I have a slim with a 4~5s YLOD where the syscon fails to authenticate (wrong answer length, as if the cable was disconnected). No clue why. Tried swapping rx and tx, I was able to diagnose a fat model fine with it, but no dice with this slim. It has the 65nm RSX with nec tokins, I'd very much like to confirm them or a gpu issue, but have so far been unable to
@@idreestech thanks, Although I did know that and correctly set it up. Turns out the GUI is unreliable, I ended up using the python script from terminal and it worked just fine!
Please make a video on uart device how to use it properly each and every step because we all are students and learns from every video so in future we can do that too like you
Hello. What was your measure on the ohmeter when it was a short? And what was the measure when you solve the issue? I know there's just a few ohms even when it's not shorted, so how can I know the difference? Thanks for the video.
Ps3 my master. I have a short question. Ps3 was only displaying from its normal output. But There was no image on the hdmi port. I checked the hdmi port. The legs were normal. And I changed the hdmi control chip. But now the machine does not start. The green light is on. The fan does not turn on. The green light stays on. Even though I press the button. There is no reaction in the ps3. There is 5.5 volts on the motherboard. There is no broken connection in the hdmi chip paths. I think there is no 12 volts or there is an obstacle that cuts the voltage to that 12 volt line. No. Where should I check or what should I change? Is it possible that the ps3 is not responding because of a bad hdmi chip or a bad workmanship. Does this hdmi chip cause the whole machine to turn silent?
@@idreestech thanks sir. That is the ps3 system cannot react because the hdmi encoder chips are short circuited. Therefore is no image on the divice. Or the ps3 system does not working or start completely.
A great video as always. I like the new style, that is, you telling what you're going to do and why. It makes it easy to follow and understand the diagnosis process.
Thanks indeed.
I'm considering to buy an oscilloscope for jobs like this, im learning and willing to go the extra mile. Whats a good brand and what specifications should it have thank you.
i recently saw a big American youtuber Louis rossmann with millions of subscribers refering your video to fix a ps2 with no display ...your work is highly appreciated
Thank you, dear!
Another great video like always can you make more videos with the UART because not everybody can afford a oscilloscope it would be great to see videos using the UART
Fine , I will.
Thank you for sharing and showing us your initial diagnosis matched the syscon reading. Scratching the board is a liitle bit risky for novices but it saves the hassle of removing the Nec Tokin. I have seen you doing it before in other videos on the fats model. I think you have problem with uart as wires too long. I keep mine short and simple with plugs.
Much love!
Personally, I like the UART method to know the exact error code however the Oscilloscope method is more convenient to test the capacitors
Дело в том , что не все владеют осилографом
Thanks for making this easier to understand!
Glad it was helpful!
That is why ur the best master!!!! Your much far better than indonesians console repairs
I have a slim with a 4~5s YLOD where the syscon fails to authenticate (wrong answer length, as if the cable was disconnected). No clue why. Tried swapping rx and tx, I was able to diagnose a fat model fine with it, but no dice with this slim. It has the 65nm RSX with nec tokins, I'd very much like to confirm them or a gpu issue, but have so far been unable to
For slim models you need to select CXR to SW.
@@idreestech thanks, Although I did know that and correctly set it up. Turns out the GUI is unreliable, I ended up using the python script from terminal and it worked just fine!
Please make a video on uart device how to use it properly each and every step because we all are students and learns from every video so in future we can do that too like you
Fine I will.
you could pull the syscom error logs to get more information...
🥹
you are pro bro
🖤🖤
@ibocan1122 Thanks so much, bro! 🙌 I really appreciate the support. Glad you're enjoying the content!
Hello. What was your measure on the ohmeter when it was a short? And what was the measure when you solve the issue? I know there's just a few ohms even when it's not shorted, so how can I know the difference? Thanks for the video.
Usually I used to compare readings from another good motherboard of the same model.
Ps4 ke SAE 004 model me tx point nahi mil raha hai .ek vedio ps4 ke model board SAE 004 me UART ka bhi ban kar dikha dijiye plz. Sir
Hello my ps3 slim just repair from Delhi India to going home town & playing game 1 day next day ps3 slim no display solution pleas
Ps3 my master. I have a short question. Ps3 was only displaying from its normal output. But
There was no image on the hdmi port. I checked the hdmi port. The legs were normal. And I changed the hdmi control chip. But now the machine does not start. The green light is on. The fan does not turn on. The green light stays on. Even though I press the button. There is no reaction in the ps3. There is 5.5 volts on the motherboard. There is no broken connection in the hdmi chip paths. I think there is no 12 volts or there is an obstacle that cuts the voltage to that 12 volt line. No. Where should I check or what should I change?
Is it possible that the ps3 is not responding because of a bad hdmi chip or a bad workmanship. Does this hdmi chip cause the whole machine to turn silent?
The HDMI encoder chip is bad. It will not let the chips take temperature. Also in this case system fan starts after a long time period.
@@idreestech thanks sir.
@@idreestech thanks sir. That is the ps3 system cannot react because the hdmi encoder chips are short circuited. Therefore is no image on the divice. Or the ps3 system does not working or start completely.
UWC.
can you make a video of a full diagnostic
May be.
Hello king, if you put the recently spread ps4 jailbreak method from update A to update B, you will be at the top
❤ أحسنت أخي الكريم
Yes!
Where to find these capacitors in Pakistan?
I never purchased new. I always got them from a donor motherboard.
@@idreestech ok. Where is your shop?
very good video thank you
Thank you too
Master more ps4 repair videos please
Sure I will.
Where i download the syscon reader error software?
drive.google.com/file/d/1GInvlyWYIiS7t7zBZjra8Y9huGStEj2n/view?usp=drive_link
I need help with my ps3 because it freezes a lot. What is the fix for it
Watch a video according to the device error.
I freezes in games
@@Lonewolf603killer57 Most probably an HDD problem. It may be with many bad sectors.
Is the HDD the heart drive
@@Lonewolf603killer57 Yes.
And for the models 3xxx?
It could be any other hardware issue.
Brother
You in Liberia
@MithOkai-i7r Hey! No, I’m not in Liberia, but feel free to reach out if you have any questions or need help with anything!
Whats the values and name of those caps? Nice video. Keep it up
These are tantalum capacitors 470 Micro Farad 2.2 Volts.
@@idreestech are you sure its titanium? Instead tantalum?
@@xboxudvarhely8400 tantalum capacitors
I correct it there, thank you.
Can a 330 mF 2V use on PS3 slim?
Yes, but it must not be oversized. Otherwise, the metal plate would not fit in.
❤❤
Sir I am trying to contact with you for last 12-13 days on WhatsApp and phone calls too but your number is off. Please Idrees bhai contact with me.
Bro, please log in to WhatsApp
But why
@@idreestech There are equipments I have already bought and I am not ready for training