Americans tend to have some weird ideas about how Europe works in many cases. Then they go on and talk about how they have guns. while i have 7.62 "AsSAuLt rIfLeS" right here in europe lol.
2 smokes aren't banned in the UK, but thankfully, we are still in Europe, but thankfully now out of the EEC ballox and still race & use them on the roads, This would be crazy set up as a supermoto, keep the great videos comin
Word of advice from a 58 ur old builder of almost every type and brand of engine known in America,always use assembly lube on any and every rotating or moving part when assembling and only use the best quality oils you can get for both break in and first short changes to the oil and fluids... Once it's up to operating temps,run it through semi heavy heat runs for up to 15 minutes 3 to 5 times,drain and change oil/fluids&filters, rinse and repeate.. You're fully broken in and ready for wot flogging IF YOU assembled it correctly,used loctite on every screw,bolt,nut/ fastener and torqued properly... Also getting the fuel to air ratio stoichiometry close to 14.5:1ish immediately after fire up..
Every single video that pops up just by the title and pic I have to click and watch every time🤣 this man’s videos are just pure gold no one is doing it like him💪🏻👏🏻
I was actually thinking of asking him which dunes he's gonna ride n if he's heard of silver lake dunes lol crazy that someone else is like dude hit up silver lake lol
U really need a proper exhaust for this build. I saw a video of the 700cc 2 stroke "megaladon" where HGS built a custom pipe and silencer for it. Maybe they can help.
I see no red and no blue loctite.. maybe it'll stay together even though he was yanking on the torque wrench rather than pulling slowly and squarely to get a true torque value... Fingers crossed that he snuck up in small increments to total torque values as it's steel or metal into aluminum blocks/cases...
Hey bro. Just a word of advice. always use loctite on all the screws and nuts inside the engine. Eventually they vibrate loose and will tear stuff up. Build looks real sick💪🏾
You should have drilled holes in each side of the existing swing arms so you can weld through to the inner tube, making it stronger. Still a great job regardless
2 smokes aren't banned anywhere in the world except for Califreakinfornia and some gayted communities across America.. 2 smokes are still legal almost everywhere except they have mandated cutting back on any new smokers,instead demanding only 4 strokes or electrics now... Great build and hopefully it'll turn out to be an amazing burner that makes your balls shrink up and crawl inside when wicking that throttle...😂 Kids nowadays have no clue but I think Vasily has caught the mixer bug and embraced it totally... 😊
Dude keep up the good work as some one who welds and builds bikes ( im not even close to ur level) but I appreciate how you go about ur builds keep it up man
Case savers are designed for the chain breaking.. nothing to do with sprocket size.. when the chain breaks it tends to bunch up between sprocket and case and brakes the case
One of the European continent's surprising (and only) advantages over us here in the States.... They're still Braaping new Braaps. KTM, GasGas, amd Husqvarna all have current machines that are 2 stroke. I know all three of those companies are owned by the same parent, I'm just making the point that 2 strokes are prevalent, and a lot more advanced, than most people probably realize.
Make sure you bring a LOT of water when riding this at the dunes. Get one of those 3qt camel packs.. It's like a little back pack that holds water. Because riding a dirt bike at the dunes is a WORKOUT; depending on how much you ride. It's not a comfy cruise like it is on a quad or a buggy. you're constantly wrestling the bull by the horns and fighting for balance a lot more often. So just bring a lot of water and keep your energy up. Trust me
Yes!!!!! Please take it to the dune soon!!! And maybe a pro rider to real show what this awesome machine can do!! Love it!!! Thanks from a 46 year old Norwegian that has always wanted to go to the dune’s! Sick sick bike!!!! If you was going to sell it..what would the price be?
@freeridemoto lol 🤡... not many motors can put out over 100 horsepower when it comes to dirt bikes or quads... the banshee has been tested tried and true and good luck finding anything that can touch it.
@freeridemoto7133 old doesn't mean bad! People still run banshee engines cause they're powerful, smooth (depending on tune) and reliable. If it ain't broke don't fix it
@Vasily Builds still a great build. The only reason I would have gone for the maico is the torque if you are doing hill climbing. I'm not sure of the torque of a tuned banshee. Also the maico engine works well in the sidecars. And they very heavy machines. I still enjoy all the work you put in to your builds
I've been watching a lot of car videos. I'm like it's only 100hp why is he extending the swing arm. And then my brain caught up. Lol. 100hp on a dirtbike is nuts. Can't even keep the front wheel down on my buddys yz450 with 50 some hp.
I'd love to build something like that. I just got a four wheeler/go kart thing off a guy that put a 94 Suzuki 300cc four wheeler engine in it. If only I had all your equipment!
hey vas, I guess 2 strokes can't be completely banned as Gas Gas are made in Spain and KTM is from Austria, those 2023 Gas Gas 500cc 2 strokes are fully fuel injected and hardly smoke
Great build. Would make a great hill climb bike too. Have a friend up here in New England that races along with his whole family. You should come on up and give it a try?...🤓
You have to admire Vasily the way he goes into builds/mods in such a genuine way with humble confidence too.
2 stokes banned in Europe??? We have street legal 2 strokes here in Europe😂
indeed, legal or not well drive them! :p
2strokes banned in europe? ive been riding 2smokers all my life and im from Belgium
almost all our mopeds are 2strokes lol
Americans tend to have some weird ideas about how Europe works in many cases.
Then they go on and talk about how they have guns. while i have 7.62 "AsSAuLt rIfLeS" right here in europe lol.
@@noidontthinksolol I'm also from belgium, also a 2 stroke rider :D
Bring that beast to the Oregon Dunes and throw some sand around with me!!!
2 smokes aren't banned in the UK, but thankfully, we are still in Europe, but thankfully now out of the EEC ballox and still race & use them on the roads, This would be crazy set up as a supermoto, keep the great videos comin
I really like this build. Looks so Nice the 4 inch stretch! I cant wait to hear it rip!
Looks great, you have such a good attitude towards building. No aftermarket swingarm so you make your own . The bike is incredible
Its honestly insane how good your are at this kinda stuff. Im about to be doing a engine swap on my grom and this gave me some motivation!!
That bikes going to be crazy can't wait to see it
Word of advice from a 58 ur old builder of almost every type and brand of engine known in America,always use assembly lube on any and every rotating or moving part when assembling and only use the best quality oils you can get for both break in and first short changes to the oil and fluids... Once it's up to operating temps,run it through semi heavy heat runs for up to 15 minutes 3 to 5 times,drain and change oil/fluids&filters, rinse and repeate.. You're fully broken in and ready for wot flogging IF YOU assembled it correctly,used loctite on every screw,bolt,nut/ fastener and torqued properly... Also getting the fuel to air ratio stoichiometry close to 14.5:1ish immediately after fire up..
This Beast is Sick Bra !! Very Well Done 👏🏼👍🏼
This is coming together nicely! Looking forward to the full send.
Yes! The first dedicated dune bike I've seen. Awesome!
You ended up looking a little tired! I would have passed out from the stress of not fkn’ up !
Great job! Truly professional job!!
That was a proper weld job! So often people just but the two sides together and then grind. No penetration .
crazy one man show 💪🏽
Every single video that pops up just by the title and pic I have to click and watch every time🤣 this man’s videos are just pure gold no one is doing it like him💪🏻👏🏻
Awesome talent, virtually limitless! Stay safe and keep having fun!!!
You should come up to silver lake sand dunes this summer. I'd love to show you around the dunes
I was actually thinking of asking him which dunes he's gonna ride n if he's heard of silver lake dunes lol crazy that someone else is like dude hit up silver lake lol
Your the only person I would trust to weld a swing arm😂
I enjoy watching this guy. Nicely done!!
Love this build Vas. So sick. Looks amazing with the restyle kit.
cool bike build. can't wait to see it run in the sand dunes.
U really need a proper exhaust for this build. I saw a video of the 700cc 2 stroke "megaladon" where HGS built a custom pipe and silencer for it. Maybe they can help.
This will work fine
He just likes having some ragged hillbilly rigged piece of crap
@@VasilyBuilds word
The pipes just look terrible lol
Bike is looking sick!!
I see no red and no blue loctite.. maybe it'll stay together even though he was yanking on the torque wrench rather than pulling slowly and squarely to get a true torque value... Fingers crossed that he snuck up in small increments to total torque values as it's steel or metal into aluminum blocks/cases...
You would go crazy if you saw me rebuild an engine
love the two stroke builds
you should get this thing on a dyno if you can
Beautiful bike! I like how you make all your own bike modifications. I love it!
That bike is going to absolutely rip man, solid build as always.
It is looking like a fresh off the showroom floor bike. Great job.
Hey bro. Just a word of advice. always use loctite on all the screws and nuts inside the engine. Eventually they vibrate loose and will tear stuff up. Build looks real sick💪🏾
This build turned out awesome man, nice work as always 👏
thats gonna be a whole new beast , this was fun to watch- thanks brother
Is there anything u haven't put a banshee motor in? Awesome build as usual 🔥
Yet another very nice build. Keep up the good work and be safe.
Love the Banshee engine... Just a cool platform..
Where did u hear that 2 strokes are illegal?
Awesome build Vasily ! Can you fit a wider tire up front so it doesn't sink in the soft sand,and to give you better control?
You don’t need a wide front, just more throttle
Typically run a "fatty" on sand with is a 90 instead of an 80, (80's are better everywhere else for 90's are better for sand)
Awesome build so far!
Ur amazing bro we appreciate everyone of ur videos please keep them coming 🔥🔥🔥🔥❤️❤️
There's something about a 2t parallel twin that gets me excited..
You should have drilled holes in each side of the existing swing arms so you can weld through to the inner tube, making it stronger. Still a great job regardless
I was going to say that
“Only extended it 4 inches” 4 inches is a lot tho I thought
2 smokes aren't banned anywhere in the world except for Califreakinfornia and some gayted communities across America.. 2 smokes are still legal almost everywhere except they have mandated cutting back on any new smokers,instead demanding only 4 strokes or electrics now... Great build and hopefully it'll turn out to be an amazing burner that makes your balls shrink up and crawl inside when wicking that throttle...😂 Kids nowadays have no clue but I think Vasily has caught the mixer bug and embraced it totally... 😊
Dude keep up the good work as some one who welds and builds bikes ( im not even close to ur level) but I appreciate how you go about ur builds keep it up man
Always enjoy your videos, this was no exception AWESOME BIKE
Them restyle kits make such a difference in looks
a banshee swapped, stretched, dune bike.
this mans going places.
Your a maniac dude. Flat out bad ass. Get this man a whiskey!
Case savers are designed for the chain breaking.. nothing to do with sprocket size.. when the chain breaks it tends to bunch up between sprocket and case and brakes the case
You’re a legend!! love the new look!!!
One of the European continent's surprising (and only) advantages over us here in the States.... They're still Braaping new Braaps. KTM, GasGas, amd Husqvarna all have current machines that are 2 stroke. I know all three of those companies are owned by the same parent, I'm just making the point that 2 strokes are prevalent, and a lot more advanced, than most people probably realize.
Make sure you bring a LOT of water when riding this at the dunes. Get one of those 3qt camel packs.. It's like a little back pack that holds water. Because riding a dirt bike at the dunes is a WORKOUT; depending on how much you ride. It's not a comfy cruise like it is on a quad or a buggy. you're constantly wrestling the bull by the horns and fighting for balance a lot more often. So just bring a lot of water and keep your energy up. Trust me
That motor is absolutely beautiful.
Can't wait to see it Ripp
Badass build bro u make it look easy
Your welding looks better and better in every video.
great job lad keep up the good work
Vas, thanks for the awesome content, Preciate it 👏🏾👏🏾
You bet
I can't wait to see that thing rip😮😊
Crazy build vasily
That's pretty sick my boy👍
Yes!!!!! Please take it to the dune soon!!! And maybe a pro rider to real show what this awesome machine can do!! Love it!!! Thanks from a 46 year old Norwegian that has always wanted to go to the dune’s! Sick sick bike!!!! If you was going to sell it..what would the price be?
This is so sick! If you’re near northwest Oklahoma little Sahara is where I ride dunes, would love to connect and can always hold a camera for ya lol!
Most impressive as usual! Thank you for the continued uploads interest!
Plz get a break line guide that goes on the front number plate that's messing with my OCD
Insane as always!!!
Thanks brother!
Great build. But I would definitely have gone for the maico 700cc single cylinder engine. Its the beast of all 2 strokes
Too much vibration no aftermarket support
the banshee is outdated
@freeridemoto lol 🤡... not many motors can put out over 100 horsepower when it comes to dirt bikes or quads... the banshee has been tested tried and true and good luck finding anything that can touch it.
@freeridemoto7133 old doesn't mean bad!
People still run banshee engines cause they're powerful, smooth (depending on tune) and reliable.
If it ain't broke don't fix it
@Vasily Builds still a great build. The only reason I would have gone for the maico is the torque if you are doing hill climbing. I'm not sure of the torque of a tuned banshee. Also the maico engine works well in the sidecars. And they very heavy machines. I still enjoy all the work you put in to your builds
I've been watching a lot of car videos. I'm like it's only 100hp why is he extending the swing arm. And then my brain caught up. Lol. 100hp on a dirtbike is nuts.
Can't even keep the front wheel down on my buddys yz450 with 50 some hp.
sweet build as always
Man I had a hard enough time keeping my KX125 in control, I can't imagine that bike, crazy lol...
Europe is single-handedly keeping 2T bikes on the road.
Ktm, husky, gas gas, sherco, beta, TM all European all build top notch 300 enduro's
awesome job man. i have enjoyed watching you hone yours skills. you remind me of my younger self
I'd love to build something like that. I just got a four wheeler/go kart thing off a guy that put a 94 Suzuki 300cc four wheeler engine in it. If only I had all your equipment!
Great-looking build
Could probably be a good hillclimb bike, too. Nice work.
That front wheel doesn’t hit the rad on full suspension compression?
Boy howdy your not as silly as I thought nice work on the swing arm
Don't forget to fish plate the splice in the swing arm.
So sick 🔥🔥
Amazing!
Hill climb racing is super fun as well.
WOW that's so amazing with your build you amazing with the best of the best job very well done with it
What CC's are your cool head domes? It should say right on the side of it. (but I guess you already put it together)
You sir are the man always look forward to your videos. Keep it up and God bless!
Definately no banned 2-strokes in Holland!
Yea looks killer bro 😎
Have you had any issues with the front tire scrubing the pipes?
hey vas, I guess 2 strokes can't be completely banned as Gas Gas are made in Spain and KTM is from Austria, those 2023 Gas Gas 500cc 2 strokes are fully fuel injected and hardly smoke
Great video bro
Great build. Would make a great hill climb bike too. Have a friend up here in New England that races along with his whole family. You should come on up and give it a try?...🤓
That is really sick!!!!!!
U did a great job as always, But where is the assembly lube for that bottom end?!?!?!?!
Длинный маятник без усилительных накладок? И внутрь стоило запрессовать по куску прямоугольной трубы нагорячую.
yo dude that thing is awesome
Cool any plans for the motor u took off
Put a Harley in it loads of low end power , the banshee motor is good tho 😉 I like it 👌 nice work
take it to the dunes!
great stuff thanks
Hahaha more money than sense in that build ! Each to their own 😂
Vasily you rock