YOU MUST WATCH!! B4 you buy a Wildtrak Roller lid. PX2 VS PX3 Design
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2021
- In this video I show what to look out for when buying a 2nd hand Wildtrak roller lid. I will also point out what lids not to buy.
WHY LISTEN TO ME? I have fitted over 300+ of this style of lid for my Customers all over New Zealand. I know them inside out and even single nut & bolt and I make them 100% watertight when fitted.
Over the years I have seen first hand the evolution of the design of these lids from the very bad PX1 to the ok PX2 and into the great PX3 and then the perfect Electric Roller lid. - ภาพยนตร์และแอนิเมชัน
Thanks Joel great video
Thank you, glad you liked it. Will be doing a fitting video soon of them.
I have this style on my Ranger. Nice and watertight and secure.
Yes they can be made water tight if you fit them and seal them up as you go
Hi mate. Great video! Would you mind making a video on how to install? Would be extremely helpful!!
Will do soon. Just need a lid and Ute now
Hi excellent video did you ever get a chance to make a install video? thanks
Hi Joel, thanks for your videos! May I ask: is it possible to install the shutter without installing the other frame with the roll bar?
Unfortunately not
Hi Joel.. hoping to pick your brain on the PX1 Wildtrak roller shutters. There are 2 black L shaped brackets on each side that bolt up under the roller shutter track and then bolt onto what looks like an identical bracket that is fixed to the tub somewhere. Can you advise what the brackets fixed to the tub are screwed into and how solid this might be ? I have accessories fitted to the roller shutter track that sometimes get on the heavy side and I am not sure how strong the roller shutter track is as Mountain Top say one thing and Ford say another....
They sound like the bracket that holds the front of the wikdtrak tub liner in place. If you are not using the wikdtrak liner then they will not be needed
Hey mate have you installed a sailplane on an xlt? Running into issues with what seem to be the alignment pins on the bottom. Do holes need to be drilled out for them?
Yes grind them off or drill them out with a 16mm hole saw
Hi, thanks for your great content. Just wondering if a later model 2019 wildtrak shutter would fit a earlier model 2012 XLT ? 👍🏼
Yes it will
What about a wildtrak shutter that’s been taken off a 2020 model, will it still fit on a 2013 model XLT ranger?
Do you have any installation video guides?
Yes I will make one soon
Salut Joël,
Petite question stp, est ce que je peux monter un rideau Ford Ranger Wildtrack T8 de décembre 2022 sur un T7 Wildtrack de 2018, les deux sont des super cab.
Les fixations et plastiques sont-ils compatibles ? J'ai peur comme tu le montre que ce ne soit pas possible.
Thank
Yes you can you just need to make up the wire loom
Hey Joel. I have a 2020 Wildtrak & have a small amount of water coming through the slats. Can this be fixed?
No not with ease. Maybe been cut or damaged by the sun
Hey how you going mate I’m currently trying to install electric roller off wildtrack onto my fx4 2017 any chance you could do a video or give me any tips with it thanks 👍🏼
Hey mate, I am about to attempt to install a 2021 wildtrak x electric roller on my 2016 xlt and can’t find much info.. how did you go with yours if you don’t mind me asking? 🍻
@@tilingtrans hey mate I’m doing the same to my 15 xlt. Did you find any info at all?
Will do this year as soon as I can get a lid and a ranger
Hey mate will a 2018 Lid fit on a 2019 BT-50?
Yes it will. You will just need to drill the holes into the tub liner for the drain tubes
@@joeldstirling Cheers mate
Hi Joel, will a 2021 wildtrak shutter/roller fit a 2012 xlt cheers
Yes it will. Just make sure you get the Wildtrak Tub liner too
2022 px3 roller shutter on a px1 2012 ranger?
Yes that will work
@@joeldstirling bit more info.
2022 Px3 wildtrak shutter on a 2012 xl ranger
Hey Joel do you know if its possible to remove the sail plane and keep the shutter? Looking to use the extra space for a roof top tent. Cheers
Unfortunately not