BA Manual Roller Shutter Installation Guide

An installation guide for Manual BA Roller Shutters sold by Bosscoauto.
This guide is modelled on a 2021 Nissan Navara Np300 D23 Pro4x, but the procedure for other vehicles are very similar. For any further questions, please contact us at [e-mail] or give us a call at 02 8729 6777.
NOTE: Mitsubishi Triton MQ/MR 2015+ roller shutters use a different bracket.
You can find this product at
www.bosscoauto.com.au/ute-rol...
We also provide professional installations for all of our products. Any item installed by Bosscoauto gets free extra cover for any installation-related issues for 1 year. Call now to book at 02 8729 6777.
More information on sport bar installations and electrical roller cover installations coming soon
Join us on Facebook: / bosscoautoof. .
For our full product range, see bosscoauto.com.au/
Unit 1/12 Bernera Rd, Prestons, NSW, 2170
[phone]
(c) 2021 BOSSCOAUTO ALL RIGHTS RESERVED

[@adammarc1912]

Can you mount a tub rack on top of this?
Looking at the off road animal tub rack base.
cheers

[@Bossco4x4Accessories]

Hi Adam! Have a look at the Bossco 4x4 tub rack - made to suit our roller shutters - www.bosscoauto.com.au/universal-black-steel-ute-tub-ladder-rack~405689

[@samham9426]

How do you adjust the tension spring. Mines no longer retracting ?

[@Bossco4x4Accessories]

Hi Sam, please contact our office on [phone]. One of our staff will be more than happy to help you. Thanks!

[@ekremmuaremi3325]

Quanto costa per nissan navara 2019

[@Blackirish__]

Good quality mate and how much?

[@Bossco4x4Accessories]

Our roller covers are made to OEM quality standards as our supplier does supply to OEM too. Please email us at [e-mail] or call us on [phone] for pricing

[@Blackirish__]

@@Bossco4x4Accessories thanks I have messaged today but they are on holidays I think this may be best value for money as the shutter only travels about 1.3 mtr so no need for electric

[@luqmanbinmohammad7780]

Brp harg?

[@veeshalrai6577]

The holes drilled can be rust later due to exposed bare metal edges

[@Bossco4x4Accessories]

As mentioned in the video, the Bossco team definately recommends applying rust protection or paint to protect the exposed metal from the elements.

[@manievanvuuren5955]

any information where the adaptor plates go if you wish to keep the roll bar?

[@Bossco4x4Accessories]

Hi! The adaptor plates should bolt onto the channel on the roller shutter. This is done with channel nuts made to suit the Bossco 4x4 roller shutters. You can purchase the adaptor plate kits from our website! :)

[@tommybanks38]

Mine goes over a speed bump and slides open, any way to fix this ?

[@Bossco4x4Accessories]

Make sure the measurements from the front of the roller cover and back of the roller cover are the same.