I bought my wife the IS3200 a few years ago and she said she has trouble lifting the 61 inch deck. The foot pedal is reversible , take the bolts off and turn it around to make the pedal closer to the operator. My wife says it makes a difference.
I appreciate you however I don't believe the 3200 came with the flap, I do have it on my 2100 and never had that issue. The grass should be discharging out the shoot, you might have a issue with your baffles if your getting piles or your mulching
Just got a used Ferris IS3200z 36hp and it works very well. I just went to start it after I got back from vacation and the blades would not turn on after I started the engine. Any suggestions?
From what I gather the Vanguard's 37 is completely made in the USA and all the other vanguard's below the 37 are not (which is kinda strange) but alot of ppl are swearing by the kawi (I happen to have a 15 kawi on an exmark turf tracer from 05 era and I'm completely surprised by it (other than the belly pan gasket , then Luckily the bolts not seized in the thread bosses / I heard that's another downfall as well for my particular kawi, no experience with newer generation) but too many options these daze, I'm going stander , and Like what I'm seeing from cub cadet , after running heavy equipment (I have run a CAT D-9 for approximately a WK., Greased more zirk fittings than one can imagine, and have been on lawn equipment starting in the 80s) I see ZERO benefit to having greasable spindles and bearings over sealed "R&R" options" wow how cub cadet has evolved, very impressive, do check those out if in market 🤘
6BT_ Str86 that is interesting, I’m not sure where the engines are made. I do know the Kawasaki motors are much quieter. Brigs is great but I’d go Kawasaki if I could do it all over again.
I lost a little faith in kawasaki. Have a 4 year old Hustler with a kawasaki and at around 300 hours, the crankshaft just snapped in half. Broke off right where it comes out of the case.
I bought my wife the IS3200 a few years ago and she said she has trouble lifting the 61 inch deck. The foot pedal is reversible , take the bolts off and turn it around to make the pedal closer to the operator. My wife says it makes a difference.
I've got the same mower. It's a 2017 61" w/ Oilguard 37hp. I've got close to 1600 hrs on it so far and it's been an awesome machine , no regrets!
A clean mower, is a happy mower! Love my Z3X’s, wouldn’t mine having the new ISX3300 to change it up a little every other day, or so✌️
If you don’t want stragglers, remove the rubber flap on the back of the deck. It’s not needed for striping and just pulls up uncut grass.
I appreciate you however I don't believe the 3200 came with the flap, I do have it on my 2100 and never had that issue. The grass should be discharging out the shoot, you might have a issue with your baffles if your getting piles or your mulching
Just got a used Ferris IS3200z 36hp and it works very well. I just went to start it after I got back from vacation and the blades would not turn on after I started the engine. Any suggestions?
I bet it feels good in the hand Bahhhhhhh
Try some Oregon gator blades. They will "suck" a lot!
how's the mower doing?
awesome! I recommend.
This mower is nothing but a snapper pro with wire harness issues
Thank you for the info.
I have no idea how you came up with that. this mower has patents, several actually. it is in no way shape or forum even close to a snapper.
From what I gather the Vanguard's 37 is completely made in the USA and all the other vanguard's below the 37 are not (which is kinda strange) but alot of ppl are swearing by the kawi (I happen to have a 15 kawi on an exmark turf tracer from 05 era and I'm completely surprised by it (other than the belly pan gasket , then Luckily the bolts not seized in the thread bosses / I heard that's another downfall as well for my particular kawi, no experience with newer generation) but too many options these daze, I'm going stander , and Like what I'm seeing from cub cadet , after running heavy equipment (I have run a CAT D-9 for approximately a WK., Greased more zirk fittings than one can imagine, and have been on lawn equipment starting in the 80s) I see ZERO benefit to having greasable spindles and bearings over sealed "R&R" options" wow how cub cadet has evolved, very impressive, do check those out if in market 🤘
6BT_ Str86 that is interesting, I’m not sure where the engines are made. I do know the Kawasaki motors are much quieter. Brigs is great but I’d go Kawasaki if I could do it all over again.
Kawasaki fuel injection sux
I lost a little faith in kawasaki. Have a 4 year old Hustler with a kawasaki and at around 300 hours, the crankshaft just snapped in half. Broke off right where it comes out of the case.