@VePedraPan i promise you on 30# Flourocarbon this knot won't even cinch down. It will slip every single time. This knot works for thinner line the Alberto works on every line I tried it on.
@@DilettanteDon maybe yea in that case, I only use thin line and thin fluoro for jigging zander and it works fine with me, I needed some fast knot to tie cuz I snag a lot on rocks and branches
@@vinistrato04 Desculpe pessoal, este é na verdade um nó de Yucatán. só que a forma de amarrar é diferente. E acho que o que você quer dizer é o nó SC, e quando comparado com o nó Yucatán, o nó SC tem uma resistência mais forte do que o nó Yucatán como o deste vídeo.
Автор, Создатель подготовил твои пальцы для такого узла. Я не могу расположить ногти пальцев параллельно , чтобы держались витки лески. С моих рук петли слетают раньше чем я намотаю нужное количество😂 👍
Practiced this knot for 2 hours with no success. Looked at the video multiple times and finally figured it out. The fluro tag end has to be long and the braid loop small. Pull on both the braids and the main fluro line slowly and it works just fine. Thanks for the video, but these points should be mentioned in the video.
Sorry 🙏, I have difficulty speaking, so forgive me because the video is wordless or sometimes without narration. Thank you for watching this video, I hope you are always healthy
The braid would easily slip through this knot. This is basically an Alberto knot tied backwards, with the mono over the braid rather than the braid over the mono. Tied the other way, with wrapping the braid around your thumb would be a much better way to do it.
@@pescadorestamora because the loops off of the thumb will not come off one at a time as you show in your video. They all come off the thumb at once, and then it wads up into a tangled mess.
There is probably something wrong with the pulling part, you are pulling the back part of the fishing line so that it doesn't come out completely through your thumb
Might be the fastest way to tie it but it's not the best way if your trying to teach new comers to a stronger braid to mono knot... Anyone looking for a better version, I suggest looking into the Alberto knot, that is if you can't tie the FG knot
The whole video starts off with him, placing the fluorocarbon tag in between his fingers, but without allowing us to know whether it is passing through or around the braided loop. Terrible oversight.
Fab improvement on how to tie this knot. Thanks for sharing.
You're welcome
One of the best and strongest fishing ties 👍🏻
Thank you and you should try it, bro
This knot is a pain in the ass. Sticking with Alberto.
thanks for the suggestion 👍
I find Yucatan much easier to tie, for me Alberto is pain in the ass... 😂
everyone is free to express their opinion 😁👍🎣🎣🎣
@VePedraPan i promise you on 30# Flourocarbon this knot won't even cinch down. It will slip every single time. This knot works for thinner line the Alberto works on every line I tried it on.
@@DilettanteDon maybe yea in that case, I only use thin line and thin fluoro for jigging zander and it works fine with me, I needed some fast knot to tie cuz I snag a lot on rocks and branches
Nicely done, it seems similar to the FG knot.
I don't think so, it's more like albright but upside down
@pescadorestamora ah yes, you're right
☺🥂
Aldark knot
Really?
A great video! Thanks.
You're welcome, sir
Complimenti 🎉 non ho mai visto un'altro più semplice di questo è eccellente
Mi scrivo al suo canale ❤
grazie, e dovresti provare questo nodo 😁
Сломал-таки систему Олбрайт. Хитрец!))
тебе придется учиться заново. Это юкатанский узел, который часто используют рыбаки в Гватемале. ☺
쉽고 간단하며 완벽합니다 좋은 정보 감사합니다
천만에요
brilliant idea!!!
You have to try it bro 😁
OK, gotta try this?
Thank you 🙏
Ikataj mancing Yang sangat terbaik Dan rapih
Terimakasih
Great video bud. Definitely the easiest way. Thank you.
You're welcome
Благодарю!
пожалуйста
Sensacional !!!
Obrigado
初心者ですが、どちらがリーダー側になりますか？
リーダーはもちろんフロロラインです
Opa amigo, sabe dizer se esse nó tem a resistência de um SF? Parabéns pelo vídeo
amigo, o que significa SF? Você pode me explicar isso
@@pescadorestamora seria o nó SF, que é muito resistente e fica bem compacto, porém é muito trabalhoso e difícil de se fazer.
@@vinistrato04 Desculpe pessoal, este é na verdade um nó de Yucatán. só que a forma de amarrar é diferente. E acho que o que você quer dizer é o nó SC, e quando comparado com o nó Yucatán, o nó SC tem uma resistência mais forte do que o nó Yucatán como o deste vídeo.
@@pescadorestamora entendi amigo, agradeço pelo esclarecimento. Obrigado
@@vinistrato04 De nada ☺
Автор, Создатель подготовил твои пальцы для такого узла. Я не могу расположить ногти пальцев параллельно , чтобы держались витки лески. С моих рук петли слетают раньше чем я намотаю нужное количество😂 👍
Если да, то вы можете использовать узел Альберто, который проще и прочнее. 😁🥂
Great video thanks
You're welcome
Which one will be the leader?
Fluorocarbon
The one who is ahead of the others in the competition... 100%
Practiced this knot for 2 hours with no success. Looked at the video multiple times and finally figured it out. The fluro tag end has to be long and the braid loop small. Pull on both the braids and the main fluro line slowly and it works just fine. Thanks for the video, but these points should be mentioned in the video.
Sorry 🙏, I have difficulty speaking, so forgive me because the video is wordless or sometimes without narration. Thank you for watching this video, I hope you are always healthy
Probably should've watched the video again after your first attempt.
👍
@@pandafox94watched it multiple times. Slow is the key.
thanks from Brasil 🙏
You're welcome, have a nice day
Wondering if it makes any difference if the fluorocarbon line is on the outside or the inside of the knot. I have seen this knot tied both ways.
I think the fluoro line on the inside might be thinner, but as for durability, I can't say. Because I have never tried
Only way to know is by doing it and test
Agree with you 👍
Klasse gemacht, Gruß Achim aus dem Cuxland
Danke, und du musst diesen Angelknoten ausprobieren, Freund
Das werde ich auch, vielen lieben Dank
Gern geschehen
Beautiful
Thank you
Wow nice and easy!
😁👍
So it’s basically the Alberto with a thumb hack?
It looks like that, but this is a Yucatan knot
How strong is this compared to an FG knot?
When compared to the Fg knot, in my opinion the Fg is much stronger, bro
Этот кнот, всем кнотам кнот!
☺
Да. Но только второй конец флюра тоже не мешало бы вставить в петлю...
Спасибо за совет
@@Nyttlenc , это уже будет супер-пупер-кнот!
Получилась бы "морковка"))
Qui forme la boucle au début de la vidéo tresse où fluoro
which forms a circle is a braid line
Nice simpul strong....👍👍👍👍👍
😁 🎣
Fancy Albright knot?
I think this is the Yucatan knot
@@pescadorestamora yes and it’s exactly the same as a Albright knot, just executed differently
@@rickyrodriguez9831 if albright wraps braids on mono, then yucatan is the opposite. maybe it could be said like that 😁
The braid would easily slip through this knot. This is basically an Alberto knot tied backwards, with the mono over the braid rather than the braid over the mono. Tied the other way, with wrapping the braid around your thumb would be a much better way to do it.
Thank you for the information and advice 🍻
멋지네요
감사합니다
좋아요
정말 사실이에요. 두꺼운 지시선을 사용하는 경우 이 매듭을 사용할 수 없습니다.
How Strong is that Knot?
strong enough
You didn't answer the question
@@mikesaelee834 😅🙏
Kuat kalau ikan kecil
@@betachannelfishing still strong enough to lift fish weighing 6-8 lbs
Labas
Vaaau🎉👍
Mahalo 🥂
reverse uni knot? braid should be on the outside and it will also make it thinner.
thank you for your advice sir
👏👏👏😁
@@sanmig1 👋👋🥂😁
これが日本で流行らない理由がわからない。初心者の自分が2〜3回で習得できて、他のノットよりとにかくキレイ。
@@石原剛-p1h では、日本ではPEとフロロカーボンを接合する際にどのようなタイプのノットが人気なのでしょうか？
Mais comment tu fait ? Moi je fais tout pareille et à la fin ça merde un max. .
I did it as you can see in the video, without hiding anything
wow
☺🥂
Any knot with the tag end facing towards the leader is going to jag in the rod guides, that's why fg knot etc is king.
That's right, for strength Fg is king. but not for speed 😁
원줄과 목줄 동시에 잡고 매듭 짓는게 이 매듭 보다 튼튼함.
👍
I cannot get this knot to work no matter how I try to do it.
why it doesn't work?
@@pescadorestamora because the loops off of the thumb will not come off one at a time as you show in your video. They all come off the thumb at once, and then it wads up into a tangled mess.
There is probably something wrong with the pulling part, you are pulling the back part of the fishing line so that it doesn't come out completely through your thumb
👍
😁
Это филигранно.
👍
How to tie a knot 100 LB??? Tuna🐟
That really isn't possible if you use a knot like this 🙏
Перфекто йоптть!
Большое спасибо
👍👍👍👍👍👍👍👍👍👍👍👍👍👍❤
☺☺🥂
He left out an important part and dubbed it over at the 53 second mark, you'll notice it once you watch it.
😮
Мотают плетню вокруг лески, а не леску
👍
Might be the fastest way to tie it but it's not the best way if your trying to teach new comers to a stronger braid to mono knot...
Anyone looking for a better version, I suggest looking into the Alberto knot, that is if you can't tie the FG knot
I agree with you
Zaključaj strunu pa onda odseci višak.Ima više prednosti
prednost je što je vrlo brz u vezivanju čvorova
If you tie it correctly very
Maybe
The whole video starts off with him, placing the fluorocarbon tag in between his fingers, but without allowing us to know whether it is passing through or around the braided loop. Terrible oversight.
The fluo is placed against the braid, not inside the loop😊
@@Icriedtoday Wrap the fluoro between your thumb and forefinger
@@vghjndghj 👍☺
lol...who walks around with hairy hands like that?
😅
your mother I'm assuming
😌
Just saying.... trim that crap
👍
1:03 you have cut apice of video
very noob
you are so funny. my video is without cut, just play zoom out graphic. you should watch it more carefully
yes i notice to
Albrigth knot
Yucatan knot
👍🏼🤝🍻
🍻 😁