Thanks for the good video! there is one question - how did you install maps with a satellite view in the program? I have a street view in Mission Planner
Very informative video . I have one question. I use DJI goggles and I don't want to root them yet . So, I do not have the menu . If I want to choose a mission number from a multi mission , can I just use the right stick with no visual confirmation ? My beeper makes a sound when I load the mission from eprom , but nothing if I push the right stick to the left or to the right to choose mission number . Thanks in advance
Is Matek going to drop the INAV target for Matek F722 flight controller? I want to build a long range fixed wing with it but some people are saying not to get it for the reason mentioned. Can you suggest a flight controller.
Matek don't make the target - the INAV team do. I'd go with the currently available flight controllers on the Matek website as all of the discontinued ones seem to have been removed..
Hi. What's the difference between saving it on FC vs eeprom? Also, is there a time limit to what's saved on FC? Cos after some time, the saved mission is no longer found on the FC. And if I saved mission 1 on Fc and mission 2 on eeprom, when i activate WP, which will it be using? (I am asking this because I don't have a cam connected yet. Still learning. Thanks.
Saving to FC saves it into the 'RAM' of the flight controller, that doesn't survive a reboot/power cycle. Things in EEPROM stay there until they are needed. You'll see when you start to play.. Best of luck!
There is an explanation of Multi Missions in the INAV Wiki under Navigation-modes. Could do with a better explanation in a dedicated Wiki for Configurator but unfortunately that Wiki is just a Home page and no more. One thing that isn't mentioned anywhere is that Mission Control now shows WP ground clearance (Grd Dist) in the WP info box. It uses this to automatically correct the WP altitude setting if the set altitude would lead to a ground collision or indicates low ground clearance if ground clearance is less than the default WP altitude (Grd Dist turns red). This stuff isn't perfect at the moment and could be improved. One issue is the WP info doesn't update when you change the Take Off Home settings or move the Home point around. You have to click each WP to get the elevation checking and ground clearance values to update correctly. You need to have the OSD MISSION INFO field enabled in order to use Multi Missions properly and also the on-the-fly Mission Planner can't be used without it. The field provides feedback on what's happening, e.g. it shows the selected mission number when you use the roll stick to select the mission you want and also info on load status and number of WPs in the mission if it is loaded. Also you no longer need to save/load to the FC before doing the same for eeprom. You can just save/load directly to eeprom instead.
Thanks for the comment, this is great! Please share your expertise by making some content or offering to help with the project.The more we help others, the more will fly INAV.. Happy flying!
@@Painless360 I did have the video running while I was working around the shop but guess I missed that part. Thanks for the quick reply and your ongoing contributions. Been watching you for years and great to see how the channel has grown.
So for imav does the rcplane have to be configured to values on the parameters to return to home or as long as I’ve set the level right and making sure the servos correct them self to the right direction the plane will automatically know how to get back home with the gps signal
Please see this video - th-cam.com/video/P4soR6QgOk0/w-d-xo.html - that should help you find those videos of mine and help you find the answers you need quickly
Dear Sir I am new to the FrSky X10s transmitter. Can you show me or do you have Instagram? I was thinking about putting Crow in my Sailplane if it can be Done ? My Fly Club fly the High Price Spektrum. So I like the Little guys. . Yes it looks like China owns the RC World. Well take Care and Be Safe too. Greg of Ohio
Pretty interesting indeed! 😃
Thanks for all the info, Lee! It's going to be really useful!
Stay safe there with your family! 🖖😊
amazing. this maes things so much easier. i tried aking missions at the field but the adroid ap i had was a bit buggy. now can just do several at home
Good information. I hope it will be less complicated soon. Since 2014 we learned with DJI Ground Station, really a child could do Way Points. Thanks
Thanks for the good video! there is one question - how did you install maps with a satellite view in the program? I have a street view in Mission Planner
th-cam.com/video/vWQViblAzlo/w-d-xo.html
informative as always. stay safe Lee
Nice and informative video, is there any way to choose mission in the glasses if you use the DJI system?
Maybe, if you try it then please let me know. I wonder if the buzzer (if one installed) would tell you as well.. Something to test... Happy flying
i'd LOVE to see a video on how to do the "mission on the fly" thing.. i still havent figured that out yet :D *hint hint*
Video on that exact topic shot and added to the INAV 3.0 playlist ;)
Very informative video .
I have one question.
I use DJI goggles and I don't want to root them yet . So, I do not have the menu .
If I want to choose a mission number from a multi mission , can I just use the right stick with no visual confirmation ?
My beeper makes a sound when I load the mission from eprom , but nothing if I push the right stick to the left or to the right to choose mission number .
Thanks in advance
Not sure, if you figure it out, please let me know. Best of luck
Is it possible to change from one mission to another during the flight? Tks for t'he video
Not sure, I've never tried. Best place to look is the documentation. Best of luck
If you lose the RC link (failsafe) is it possible to continue the mission in automatic?
thanks
Look at failsafe_mission_delay
Is Matek going to drop the INAV target for Matek F722 flight controller? I want to build a long range fixed wing with it but some people are saying not to get it for the reason mentioned. Can you suggest a flight controller.
Matek don't make the target - the INAV team do. I'd go with the currently available flight controllers on the Matek website as all of the discontinued ones seem to have been removed..
Hi. What's the difference between saving it on FC vs eeprom?
Also, is there a time limit to what's saved on FC? Cos after some time, the saved mission is no longer found on the FC.
And if I saved mission 1 on Fc and mission 2 on eeprom, when i activate WP, which will it be using? (I am asking this because I don't have a cam connected yet. Still learning.
Thanks.
Saving to FC saves it into the 'RAM' of the flight controller, that doesn't survive a reboot/power cycle. Things in EEPROM stay there until they are needed. You'll see when you start to play.. Best of luck!
@@Painless360 Thanks lots!
Hello, is it possible to save multiple missions to FC in iNav 7.1.x using only the transmitter? I mean without GUI.
You can select the mission you want (from those stored in EEPROM) using the radio. See github.com/iNavFlight/inav/blob/master/docs/Controls.md
Is matek F411 wing can setup mission on inav?
Yes you can. Best of luck
There is an explanation of Multi Missions in the INAV Wiki under Navigation-modes. Could do with a better explanation in a dedicated Wiki for Configurator but unfortunately that Wiki is just a Home page and no more.
One thing that isn't mentioned anywhere is that Mission Control now shows WP ground clearance (Grd Dist) in the WP info box. It uses this to automatically correct the WP altitude setting if the set altitude would lead to a ground collision or indicates low ground clearance if ground clearance is less than the default WP altitude (Grd Dist turns red). This stuff isn't perfect at the moment and could be improved. One issue is the WP info doesn't update when you change the Take Off Home settings or move the Home point around. You have to click each WP to get the elevation checking and ground clearance values to update correctly.
You need to have the OSD MISSION INFO field enabled in order to use Multi Missions properly and also the on-the-fly Mission Planner can't be used without it. The field provides feedback on what's happening, e.g. it shows the selected mission number when you use the roll stick to select the mission you want and also info on load status and number of WPs in the mission if it is loaded.
Also you no longer need to save/load to the FC before doing the same for eeprom. You can just save/load directly to eeprom instead.
Thanks for the comment, this is great! Please share your expertise by making some content or offering to help with the project.The more we help others, the more will fly INAV.. Happy flying!
is it possible to switch to imperial units in INAV? Trying to work in Cm in the MP is driving me nuts LOL
Check out my video on INAV 5 0 that came out at the weekend, we talked about those specifically... Happy flying
@@Painless360 I did have the video running while I was working around the shop but guess I missed that part. Thanks for the quick reply and your ongoing contributions. Been watching you for years and great to see how the channel has grown.
So for imav does the rcplane have to be configured to values on the parameters to return to home or as long as I’ve set the level right and making sure the servos correct them self to the right direction the plane will automatically know how to get back home with the gps signal
For missions to work, everything else on the model needs to be setup perfectly. See my series on setup.
@@Painless360 can u link the one I would need to look at when u have spare time I don’t know which one would be the one I need to see
Please see this video - th-cam.com/video/P4soR6QgOk0/w-d-xo.html - that should help you find those videos of mine and help you find the answers you need quickly
So its 120points total? Or 120 per mission?
This is an older video, the best place for the latest detail in INAV 6.1.1 is the wiki. I am not a fan of the multi-mission setup. Best of luck.
Dear Sir I am new to the FrSky X10s transmitter. Can you show me or do you have Instagram? I was thinking about putting Crow in my Sailplane if it can be Done ? My Fly Club fly the High Price Spektrum. So I like the Little guys. . Yes it looks like China owns the RC World. Well take Care and Be Safe too. Greg of Ohio