Tradução em português por favor, comprei 4 e não consigo o pareamento final, onde ao ligar deveria parear os 4 , então nesse ponto não consigo o pareamento
To Pair three V4C units: - label Unit 1 - turn Unit 1 and Unit 2 on by holding Motorcycle button until Red Flash - wait until both units show blue flashing - hold down “A” on each unit until shows Red/Blue fast flashing - on Unit 1, press “A” once. Unit 1 will go to Blue flashing. - wait 15 seconds until Unit 2 also goes to Blue Flashing - on Unit 1, press “A” once. wait few seconds. The units will be connected. - turn off Unit 2 - turn on Unit 3 by holding motorcycle button until red flash - wait for blue flashing on Unit 3 - hold down “B” on Unit 1 and on Unit 3 until both show Red/Blue fast flashing - on Unit 1, press “B” once. Unit 1 will go to Blue flashing - wait 15 seconds until Unit 3 also goes to Blue flashing - on Unit 1, press “B” once. Wait few seconds. Unit 1 and 3 will be connected. - Turn on Unit 2, wait until Blue flashing. - on Unit 1, press “A” once. Wait few seconds. All units will be connected. To use as set of three units: - turn on all units - when all units show blue flashing - press “A” once on Unit 1 - press “B” once on Unit 1 - all the three units will be connected
I just got my 4pcs system and this video is just as relevant and helpful as ever. Thank you!
Thank you. I been waiting for someone to explain as good as you have.
You are welcome
Tradução em português por favor, comprei 4 e não consigo o pareamento final, onde ao ligar deveria parear os 4 , então nesse ponto não consigo o pareamento
Do you have to set them every time?
Hello, just set it up for the first time.
Ce n'est pas des v4c mais v4 1 ère génération
Yes, just the difference of earphones. V4C is a earphone specially for referees. V4 PLUS is a headset specially set for motorcycle helmets.
How to do this with 3 pcs?
To Pair three V4C units:
- label Unit 1
- turn Unit 1 and Unit 2 on by holding Motorcycle button until Red Flash
- wait until both units show blue flashing
- hold down “A” on each unit until shows Red/Blue fast flashing
- on Unit 1, press “A” once. Unit 1 will go to Blue flashing.
- wait 15 seconds until Unit 2 also goes to Blue Flashing
- on Unit 1, press “A” once. wait few seconds. The units will be connected.
- turn off Unit 2
- turn on Unit 3 by holding motorcycle button until red flash
- wait for blue flashing on Unit 3
- hold down “B” on Unit 1 and on Unit 3 until both show Red/Blue fast flashing
- on Unit 1, press “B” once. Unit 1 will go to Blue flashing
- wait 15 seconds until Unit 3 also goes to Blue flashing
- on Unit 1, press “B” once. Wait few seconds. Unit 1 and 3 will be connected.
- Turn on Unit 2, wait until Blue flashing.
- on Unit 1, press “A” once. Wait few seconds. All units will be connected.
To use as set of three units:
- turn on all units
- when all units show blue flashing
- press “A” once on Unit 1
- press “B” once on Unit 1
- all the three units will be connected
@@andrewwells6272 I could not understand the video, may you write how to do this with 4 pcs
@@andrewwells6272How do i know which one is first , second and third ?