@@theshackthatdennisbuiltI bought some V4 headsets. Haven’t used them much because I couldn’t figure out how to pair them. I finally was able to figure it out. How do I turn them off without resetting them?
Thanks for a wonderful clip. Hopefully they can make the connections easier in the future. After I switched off and then on do I need to press again anything or they connect automatically ??
I bought these exact same Headsets for refereeing Soccer. I bought for and I labeled them Referee, AR1, AR2, 4th Official. I know labeling them might seem crazy but I want them to be designated for certain Referees. I numbered my head headsets 1-4. 1 is mine because it’s the main one and 2 and 3 is used for the ARs
saludos, e visto que existen diferentes tipos de V4 tales como V4, V4-pro V4 C y creo que una versión mas y tengo conocimiento que no todos emparejan con los V6 quisiera saber cual prototitivo V4 tengo que comprar.
The other way I can tell which headset is mine is because I bought ear pieces for the Right Ear for the ARs. I feel more comfortable with mine in my left ear.
I was able to connect, however, the 2 V6 both gives very obvious ambient/electrical noise. Also is there a way to reset/clear current settings? Thank you!
Instructions for (one) EJEAS V4 and (two) V6s: Part One 1) Turn on V4 and V6#1 (on V4 the green phone button, on the V6 the motorcycle button) 2) Pair V4 A (press button until flashing blue/red) to V6#1 C (press button until flashing blue/red - do this at the same time as you do V4 A) - will flash blue together when in sync ~3 sec 3) Press V6#1 C twice - allow about 3 seconds between presses to cycle - confirm V4 and V6#1 can "talk" (that you can hear in each mike & speaker) Leave V6#1 on Part Two 1) Turn on V6#2 2) Pair V4 B to V6#2 B (as you did for V4 A and V6#1 C above) 3) Press V6#2 B twice (as you did for V6#1 C) Leave V6#2 on Part Three Press V4 A - all 3 comms should now be paired up and confirm that you can talk and hear each other. If you cannot, turn all 3 off and repeat this process. To turn the comms off - V4: press the FM and phone button together; V6: press the very small button above the phone button. FAQs: YES - you need to pair the comms up each time you turn them on/use them. NO - Three EJEAS V6s cannot sync up for crosstalk together. You WILL need a V4 as the controller comm. Three V6s can talk to each other in an intercom mode (one comm to another). For four EJEAS comms, you will need a pair of V4s and a pair of V6s. I may create a similiar instruction set for that at some point in the future.
Can you keep the intercom open for long periods of time, or do you always have to toggle speech on and off? I always see refs reaching for their hip when using these in games, so curious if they have to function like a walkie talkie in that way, or if you can just keep the channel open?
The video is excellent, but for some reason after I connect my second V6 (b) I lose syncing. Grrr. I'll keep trying unless there's something I'm missing.
Tx from Germany - they did it so none understands it - so, thanks a lot, now they work!
This tutorial is better than what Ejeas and other manufacturers provide for syncing instructions. Thanks!
Lord they couldn’t make it any more confusing to simply pair these up. Thank you soo much for the informative video.
Yeah. My first several times ended in failure
@@theshackthatdennisbuilt do you know how to pair up a 4th receiver/V4?
@@theshackthatdennisbuiltI bought some V4 headsets. Haven’t used them much because I couldn’t figure out how to pair them. I finally was able to figure it out. How do I turn them off without resetting them?
Hey bud
Our group of officials loves this vid , so helpful thanks for posting !
how do you reverse the headset to fit over the right ear instead of the left. I don't want to break it.
Thanks for a wonderful clip. Hopefully they can make the connections easier in the future. After I switched off and then on do I need to press again anything or they connect automatically ??
Hi, thanks for the video. Can you tell me how we know the battery level?
Also when you turn them off, do you have to do the same sequence again every time. Or will they remember the code?
I bought these exact same Headsets for refereeing Soccer. I bought for and I labeled them Referee, AR1, AR2, 4th Official. I know labeling them might seem crazy but I want them to be designated for certain Referees. I numbered my head headsets 1-4. 1 is mine because it’s the main one and 2 and 3 is used for the ARs
I paired three v4 pro. From the middle intercom i hear a bad noise always. Do you know the reason?
Excellent Video! Just purchased and waiting to use for Refereeing!
Are these the one that cost 50$ on amazon?? Or which
Great video! I know know how to pair but I would like to find a user manual on-line. Nothing came with my set. Where can I find a user manual?
saludos, e visto que existen diferentes tipos de V4 tales como V4, V4-pro V4 C y creo que una versión mas y tengo conocimiento que no todos emparejan con los V6 quisiera saber cual prototitivo V4 tengo que comprar.
How do you know when they are charged completely ?
I got two sets of v4 both buttons just show A and B. Does that mean if I set them all for either letter they’ll still connect the same?
Your was the only video that was very. Helpful tx again
Hi can you use soft earpiece on them
Really helpful - got these to sync on first try. Let's hope it works come game time...⚽
Can you replace the headset and use an earbud with audio and microphone?
The other way I can tell which headset is mine is because I bought ear pieces for the Right Ear for the ARs. I feel more comfortable with mine in my left ear.
I thank the Lord every day for this amazing and informative video.
I was able to connect, however, the 2 V6 both gives very obvious ambient/electrical noise. Also is there a way to reset/clear current settings? Thank you!
Can one V4 connect three V6?
How do you know which device is A, B or C?
Yay! Mine are hooked up! Thanks so much! You are the best!
Will these stay synced up? Or do I have to re sync them every time?
They stay connected
How do you charge them???
Instructions for (one) EJEAS V4 and (two) V6s:
Part One
1) Turn on V4 and V6#1 (on V4 the green phone button, on the V6 the motorcycle button)
2) Pair V4 A (press button until flashing blue/red) to V6#1 C (press button until flashing blue/red - do this at the same time as you do V4 A) - will flash blue together when in sync ~3 sec
3) Press V6#1 C twice - allow about 3 seconds between presses to cycle - confirm V4 and V6#1 can "talk" (that you can hear in each mike & speaker)
Leave V6#1 on
Part Two
1) Turn on V6#2
2) Pair V4 B to V6#2 B (as you did for V4 A and V6#1 C above)
3) Press V6#2 B twice (as you did for V6#1 C)
Leave V6#2 on
Part Three
Press V4 A - all 3 comms should now be paired up and confirm that you can talk and hear each other. If you cannot, turn all 3 off and repeat this process.
To turn the comms off - V4: press the FM and phone button together; V6: press the very small button above the phone button.
FAQs:
YES - you need to pair the comms up each time you turn them on/use them.
NO - Three EJEAS V6s cannot sync up for crosstalk together. You WILL need a V4 as the controller comm. Three V6s can talk to each other in an intercom mode (one comm to another).
For four EJEAS comms, you will need a pair of V4s and a pair of V6s. I may create a similiar instruction set for that at some point in the future.
Can I Use Through Mobile
How do you turn them off when not in use?
Hold the unmarked button for a few seconds
Love you man - awesome explanation ❤
I cannot get them to connect for the life of me. Is there a way to reset everything to start from scratch?
what about 3x of V6?
Can you keep the intercom open for long periods of time, or do you always have to toggle speech on and off? I always see refs reaching for their hip when using these in games, so curious if they have to function like a walkie talkie in that way, or if you can just keep the channel open?
The intercom is always on. You hear what goes on 💯% of the time
@@theshackthatdennisbuilt Awesome, thanks!
The video is excellent, but for some reason after I connect my second V6 (b) I lose syncing. Grrr. I'll keep trying unless there's something I'm missing.
It's very glitchey. The one frustrating thing about them
For 1 "v4" and two "v6", can all three refs talk at the same time?
Yes they can. Works nicely
@@theshackthatdennisbuilt how about 3 "v6" can they talk all the same?
@@theshackthatdennisbuiltIm struggling to connect two v6 and one v4
how the device this price
Great video. Do you find any sound quality-power difference between V4 and V6 units?
This video has changed my life.
Praise the Lord and pad the intercom. Incredible
thanks for the help man
Love this