Thanks pal, kudos for having the patience to hold a camera while doing that, looks easier than I was imagining but good ol Japanese engineering rarely disappoints. Thanks again bro hope yours is running well
Appreciate your support 🙏 The engineers make these east to come apart and put back together, if you don't fuk around you'll never find out! 🎉 Thanks for watching 👀
Appreciate your support 🙏 Easy you say... I've been busting knuckles for 36 years doing this work After a few thousand, it's still work, just remember it's all nuts and bolts that hold a vehicle together Ifnit went together , it can come apart Try not to think of the whole repair, just one bolt. 1 step at a time I'm sure you're amazing at what your proficient at, before you can achieve, you must believe! You can do it!!!
Process of elimination my friend... Always start with a K.I.S.S. 1.Check fuses & relays 2.put key in ignition & turn to crank then back off quickly, do this about 5-10 times, eventually maybe, it will start Most time this tells you possible solenoid failing/failure, if this doesn't work.. 3.Good ole hammer tap to BODY of starter, middle 💪 strength,not too hard, not to soft, just to put a hole in your starter If that still doesn't do it 4. Pull it down and out, shake it, if it's making a rattling noise it's most likely done it's job and it's time for replacement 5. Once out, verify at local parts house for testing Hope that helps! Thanks for watching appreciate the question
I like that you did this during the day with plenty of light, so your audience can see everything clearly.
Thanks pal, kudos for having the patience to hold a camera while doing that, looks easier than I was imagining but good ol Japanese engineering rarely disappoints. Thanks again bro hope yours is running well
Appreciate your support 🙏
The engineers make these east to come apart and put back together, if you don't fuk around you'll never find out! 🎉
Thanks for watching 👀
great job
thanks.... its easy to you
Appreciate your support 🙏
Easy you say...
I've been busting knuckles for 36 years doing this work
After a few thousand, it's still work, just remember it's all nuts and bolts that hold a vehicle together
Ifnit went together , it can come apart
Try not to think of the whole repair, just one bolt. 1 step at a time
I'm sure you're amazing at what your proficient at, before you can achieve, you must believe!
You can do it!!!
🍀☘️⭐🌟👍
Omg the freakin lead wire connector 😡🤬
Appreciate the comment, yeah they're fun, just remember if you don't fuk around you'll never find out 🎉
How did you know the starter was bad mine would turn on but wouldn't crank
Process of elimination my friend...
Always start with a K.I.S.S.
1.Check fuses & relays
2.put key in ignition & turn to crank then back off quickly, do this about 5-10 times, eventually maybe, it will start
Most time this tells you possible solenoid failing/failure, if this doesn't work..
3.Good ole hammer tap to BODY of starter, middle 💪 strength,not too hard, not to soft, just to put a hole in your starter
If that still doesn't do it
4. Pull it down and out, shake it, if it's making a rattling noise it's most likely done it's job and it's time for replacement
5. Once out, verify at local parts house for testing
Hope that helps!
Thanks for watching appreciate the question