Permanent Tire Lettering - INSTALLATION VIDEO
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2015
- Thank you for watching our video on how to install the Tire Stickers Permanent Tire Lettering Kits. This video will show you how to install our tire letters the right way and minimize the errors that can occur during installation. In this video, we will be installing the goldRush Rally design, but any tire lettering design can be ordered through our website. For more information on our Permanent products as well as our other products, please visit our website or social media pages.
Tire Stickers has been providing tire sidewall branding products since 2007, and is a global leader in tire sidewall branding.
Instagram - / tirestickers
Facebook Fan Page - / tirestickers
Google Plus - plus.google.com/b/11745862484... - กีฬา
![[Vowel]물고기는 물에서 살아야 해🐟🤣Fish have to live in the water #funny](http://i.ytimg.com/vi/3G9MH063Cx4/mqdefault.jpg)
Recently saw a guy with these on his tires, gave me the website info. Super excited to do for my Mustang!!!
I have 2 questions flexement main chemical is? and the letters are made of?? thanks for your time!
I have 33X12.50X15, which size sticker would be best to pop out ?
Solid!!!
If I don’t have the adhesive supplied what other one do I need to use? Brand and what not
I have 255/45/17 on the rear and 225/45/17 on the front. What size stickers would be best?
How do you clean these letters as it gets dirty after a while
we're can I order some???
This took ages for me. You must use acetone because it really does get the oil and grease out even if you spend ages using other products before hand. I ordered Michelin letters and the size was correct but unfortunately the spacing between the letters was millimetres out. So I had to cut them individually and stick them on!
+Semp 420 Semp, sounds like you were looking to do a perfect letter match of the existing lettering that is on the tire. We do this all the time! Unless we know that before hand, we will only send the dimensions that is in the order. Glad you got creative to make it work thoguh :) Thank you
I had some letters on my old tires which I managed to peel them off without damage. Can I reapply the used rubber letters on a new set of tires using your adhesive?
+myfastgti07 We recommend a new set, once the product vulcanizes it degrades the rubber and very likely will not bond well again. Welcome to try and purchase more adhesive, but no guarantee!
Is the Falken Azenis kit with the 4 decals option enough for all 4 tires top and bottom? If so that would be 8 pieces right?
+vepulan7 yes 8 total separate decals, 4 of each
I have 275/35/R19 size tires on the rears, and 245/40/R19 size on the fronts. Want to do a custom font. What size would you guys recommend for the best look for front and back?
1.25" for both
I have a 2013 Honda civic EX 4-door with 16" factory rims and tires. What size lettering you recommend? Also once installed can I remove it if I don't like it?
We have a calculator on our website to help you with your choice of sizing, many people go with 1.25" height for those tires. All of our products are removable if necessary
Hello, I've got the 225 45 r17 toyo proxes t1 sport. What tire decal height is recommended?
1.25"
How will if I know if the Pirelli logo will be the same exact size so they fit directly over the current black lettering? My tires are Pirelli P Zero Nero P 235/50ZR 18 97W
You can order a perfect fit here:
www.tirestickers.com/product-category/tire-lettering/
Pretty easy to show on a flat tire wall, doesn't like to stick if you have a curved tire wall.
If you notice the decal is applied over a ribbed surface on the pirelli tire and bonds completely. We recommend smooth surfaces but any surface can be adhered to. If the decal does not bond it is a result of dirt or oil residue on the tire.
Is there a way we could do an episode with your stuff? Cheers! -- *FC*
Yes you can! Please email us at info@tirestickers.com to discuss
*Awesome!* Will do. Thanks!
Hi I have tires that are 205/40/17 what tire letter height would you recommend?
+Eugene Kwan 1" MAX
I have a couple of questions will this void my warranty on my tires and also how long will the sticker last on a daily driven car?
Steven
We work with the tire companies so no this does not void warranty. Permanent will last the lifetime of the tire!
Since i bought a 2nd set..was wondering what would've gone wrong for my first set after a couple of months the letters started to come off and part of the rubber with them. I cleaned as well as i could and followed all the steps..any advice for this second set.
Buy tires with white letters already included, like I’ll be doing next time.
Same thing is happening to me now
I want to place a order but im not sure what size to choose the letters...? Is for my 2015 mitsu evo final edition it comes with 225/45/18 which size would you recommend?
+Atento Ami Recommend 1.25" MAX, you could do 1" to be closer to stock sizing
+Tire Stickers thanks for the fast response, will do..
I've got a question for you I've got a3 wheel Volkswagen karma Kia it has 15 is tires underwear and 116 inch Harley tire on the front can I get decals small enough to go on the motorcycle tire for both sides and then get decals for the 15 inch tires on the back and do you make them in Old English letters and if I order a name is it coming individual letters are can you put them together and one sticker
Yes we can do any size! Go ahead and email us at info@tirestickers.com for details
Are you still being lazy or have you finally replaced those tires with 3 more motorcycle tires?
How can I order from you guys
do you guys sell Pirelli Tire stickers I have some 19th inch Mustang GT wheels 265 40 19 what size would I need
You can order any design not in the shop through our Create Your Own section. In the font drop down you can select many brands that may not be displayed in the shop. Let us know if you have any questions at info@tirestickers.com
Do you have tyre stickers for motorcycles and do you recommended them
Yes we do. You can do any tire sticker we have for a car on a motorcycle as all our stickers are custom made for the specific size of the tire. You can create one here www.tirestickers.com/shop/motorcycles/
Sounds like that could be a bad idea seeing that motorcycles use the sidewalk for cornering
What would be a good height for a 225/40/18?
We would recommend 1" or 1.25" MAX
Tire Stickers alright thanks! I appreciate it I'll be ordering some nitto letters in the spring
I HAVE A 2016 DODGE CHALLENGER SCAT PACK. IT'S RUNNING 245/45ZR20 ALL SEASON PERFORMANCE TIRES. WHAT SIZE LETTERING SHOULD I ORDER FOR WIDE FONT? THANKS FOR THE HELP.
We recommend 1.25" for a proper fit, some customers would go with 1.5" height for a bold look
Yeah I'm going for that bold look
so i'll go with the 1.5", thanks for your help much appreciated
I see some people using sandpaper on there's but not on this video is that needed?
Sand paper is not required for proper application
i have 235/35/20 tires and i don't know which one i can buy i want the lettering to be as big as possible I'm ready to order as well
+Kendrick Okafor We would recommend 1" MAX, 0.75" size
can the acetone damage the paint of the rims?
that's the same question I was going to ask. The acetone from what I've read can damage the paint of your wheels so I'd be careful not to overspray or let too much of it drip down to your wheel. It could eat the paint.
try just using a wax and grease remover is you're worried
What was the height of his stickers? 1.25?
Thank you!
The decals in this video are 1" for a low profile exotic vehicle
I just order mine yesterday but I'm wondering how long will they stay on I'm puting them on my car that I drive every day
Per our website, we offer free replacements for a few letters just pay for shipping.
Tire Stickers so I would have to go on the site and order them again but just pay for shipping? thats good then im really looking forward to geting mine thank you
How about answering the question..how lo g do they stay on
Is this high pressure washer resistant??
Maybe put the tire stickers on after you "high pressure wash" all your cars paint off.
where to buy in uk?
+Gurkhas soldier We have distributors stocking material locally soon. You can order online at www.tirestickers.com
I just bought 1.5in Stickers. I have 215/50/17. Is this too big? Thanks.
Greg Ochser
its a moderate look. 2inch is your maximum greetz
would you be able to take it off, if you dont like it?
+Dont Be Haydenn The permanent is meant to last the lifetime of the tire but can be removed if absolutely necessary. We recommend starting with our short term product first if you are unsure of the look!
What happens if you have a flat ?
A flat tire would mean a new tire and new decals for that tire. We sell individual decal replacements for customers!
Avalible in south africa???
Yes worldwide!
Not as easy as it looks ! It might just be common sense, but DO NOT try to apply over any factory tire lettering. The surface that the stickers are being applied to needs to be completely smooth and as flat as possible. If not, it will be very difficult for the stickers to completely adhere to the rubber. The stickers are not flexible enough to conform over any protrusions. So, I suggest before purchasing, make sure you have an area long/high enough for your stickers that is flat, and smooth. You most likely will have to notify the seller for what the length/height will be for your specific sticker lettering.
We also sell letters that custom fit over the existing factory letters or you can sand down the existing letters before applying
Omg that makes perfect sense. Thought I done mine perfectly, followed all the steps, but you're right it was over existing letter which contained grooves. On my second set, want a third. I wonder if they'd give me a discount @Tire Stickers
Tire lettering... how and why did that become a thing? Did it just take off due to suppliers paying people $$ to add bright lettering of their product to the tires? I'm all for customization but that may be the first (besides those lol bike racks that are never used) for me that, in my opinion, makes the car look stupid. I guess my reason why I think it looks stupid is, I don't want attention to be drawn to letters of the brand of my tire, I want people to notice the lines of the car, the custom wheels, the paintwork, the engine/exhaust note, not tire letters :P . So serious question, why do you guys have them? Do you get comments like oh those are dope af, dank af, hella fly af, etc?
We appreciate your question and can help fill you in on a bit of history. Tire lettering has been available since the very first tires prior to 1900! This lettering was available on aircrafts as well as automobiles through the next several decades as an indicator of specifications and branding information. Popularity expanded with the introduction of whitewalls and other colored lines as well as the muscle car era. We've expanded on the use of this technology by offering the ability to customize completely. Just like a vinyl decal, paintwork, etc. you can put anything on the tire not just the tire brand. In reality, tire lettering was one of the first 'packages' available for automobiles, right along with A/C and power windows. Hope this helps put it in perspective for you!
It does help, thank you! My father was in love with the whitewall tires that was on his 58' Impala when he was a teen. I will have to ask him what he thinks about today's tire lettering :) Thanks again you guys, all the best in the success of your product and service.
Personally, I enjoy lettering on tires. Mainly because I enjoy the look of them in motion (since it really emphasizes the spinning motion to your eyes), and also because it reminds me of racing tires. Unfortuntely, there are no good summer tires being offered with built-in lettering. All that's being offered really are BFG Radial T/As and Cooper Cobras (both all-season tires), and only for 15 inch wheels. So I'm glad that these decals exist. That way I can switch to _far_ superior tires (for my application) without losing the fun/racey look of my raised-white-letter tires.
*Now my dad on the other hand has always disliked them and has gone as far as to call them circus tires (lol), but he can usually appreciate at least a bit of color to indicate (to a friend standing by) whether or not you're getting unnoticed wheel spin. He once went as far as to color in the "M&H" on his drag radials with a grease marker just for kicks (it's only on one end of the sidewall), and some drag racers might color a big vertical rectangle on their tires for the same purpose. Highlighting wheelspin to an observer.
So, the colored letters can serve for both form and function. Not anything huge, but it _can_ be something other than advertisement.
I have a 2015 BRZ Satin Pearl White which is Cool, BUT, I would Blow a small fukn Horse for that Car in front of my Grandmother.............Where do you get that Gold Carbon Fiber. That is Bad ASS. I would do my Hood in that. Sharp as Hell....
'TYRE', to 'tire' is to run out of energy
I'm running 235/50/18's up front and 265/50/18's on the back. What sticker size would be best?
+smurfedgt 'best' is a bit subjective, we have a calculator on our website to suggest various sizing options. For your tires you could opt for 1.75" height or 1.5" or 1.25" for a more stock look
thanks!