I really appreciate your videos! I used your motor mount vids to help me do that, and today I'm changing out the starter! Your videos are clear, informative, not rushed, but also no wasted time. Thank you! God bless you!
Thank you! I suspect I'm going to get to do this. Nothing looks "simple" on modern cars, so congratulations on actually being able to film it halfway decently!
Awesome how to Alexey. My starter on my 2000 neon is starting to go out. thank you very much for the guide. it gave me the confidence to do the labor myself.
I know that you posted this 4 months ago but i have same car but theres like a plastic cover on the bottom blocking me from loosening is this by chance a heat shield and could i remove ? outside of that GREAT video
John Horan John, there is no way to remove the starter unless you remove that mounting plate. It is a real bear to remove...You will need some 1/2" tools and breaker bars, and a pry bar. I had an easier time replacing the heater core...
For anyone with an Automatic transmission 2000-2001 Neon (Mine is a Plymouth); After you remove the plastic protector underneath, you will need to remove a metal plate used by the engine/transmission for support. The metal plate has one small (10mm?) bolt that connects to the intake manifold, two 15mm bolts in the middle of the plate, and three 18mm bolts at the bottom. Remove them all and the plate to gain access to your starter's bottom bolt and to be able to remove the starter through the bottom.
Hey buddy I have a 2001 dodge neon and everything is basically the same only there is a plate bloccking the way of the bottom 15mm bolt any ideas? or do i have to remove that as well because its attached to a lot of other parts
I have replaced the starter as directed..BUT now there's an issue.i removed part of air box for easier access and reinstalled everything correctly bit as, soon as I start car it acts as if the accelerator is, pressed or the starter is on constant .burning up the starter to failure
50lxnando Are you sure that you connected all cables of the starter correctly? Beside that.. the throttle body hose have to be well tightened and connected on boss sides. also check all vacuum hoses...
50lxnando If throttle body hose or throttle body is not connected on this dodge neon the car will act like accelerator pedal is fully pressed , cause throttle body plate is completely open and maximum of air goes to the engine...
my sister has a 2002 Dodge neon I just remove the manifold and it was the starter was easy to get in and get out that's the way I did and crawl underneath car
Extremely helpful, and your English is very sharp and easy to understand
Happy 😊 to help.
I really appreciate your videos! I used your motor mount vids to help me do that, and today I'm changing out the starter! Your videos are clear, informative, not rushed, but also no wasted time. Thank you! God bless you!
Thank's friend....
0
Thank you! I suspect I'm going to get to do this. Nothing looks "simple" on modern cars, so congratulations on actually being able to film it halfway decently!
I was looking for 1999 Neon, but your video help me to understand the process and key working tips.
thank you..
You have done so much work on this car, you are becoming a Neon expert!
thank you
Thanks I used your video as a reference several times, after a year or 2 goes by I can never remember how I did the job the last time.
the same happens sometimes to me, thank you for your comment.
Thanks for the very helpful video. Keep up the good work.
phil c Thank you.
Great video, Alexey!
Thank you. You've helped so many people!
You welcome John!
Awesome how to Alexey. My starter on my 2000 neon is starting to go out. thank you very much for the guide. it gave me the confidence to do the labor myself.
Thanks for making this video, I'm about to go change the starter in my daughters car, will be much easier because of your help!
I just want to say thank you for your videos.
with your help I do all my own work on my Neon.
#ladymechanic
Thank you. This is exactly what I needed.
Very nice bro, thanks a lot!
hey son..i love you and hope you have a great awesome,wonderfull day because your a terrific kid and your the best....love dad
I know that you posted this 4 months ago but i have same car but theres like a plastic cover on the bottom blocking me from loosening is this by chance a heat shield and could i remove ? outside of that GREAT video
you need to remove plastic protective cover to get access to the bolt... if you don't want to remove the cover try to loosen the bolt from the top...
Very informative. Keep up the good work.
how long do you think that used starter will last? 6 months?
Great video thanks a lot
thank's for you comment...
i'm in florida.... from where are you..
what a great help!!
Tom Lukefahr If you will perform this labor. Install the new starter not rebuild or from junker.. The one from junker last me only 1 year..
How do I change the antenna on my Neon 2002? Is it replaceable with a universal antenna (an antenna that is not expandable)?
I have a big mounting plate from the transmission in the way of the lower bolt. Do you not have this?
no.... i don't have transmission mount there cause my transmission is automatic.. look's like you have manual tranny that's why...
Spikey911usa I have that mounting plate i the way... How did you overcome this?
you have to remove the bolt while blocking th nut from the other side... usually they using lock thread that's why heat it with the touch...
i have video on my channel were i was replacing transmission on Mazda 626.. watch some of them and you will see how to remove those mounting plates
John Horan
John, there is no way to remove the starter unless you remove that mounting plate. It is a real bear to remove...You will need some 1/2" tools and breaker bars, and a pry bar. I had an easier time replacing the heater core...
I have a 2006 Honda civic si ..... I need help changing the water pump. Ismitmpossible for u
For anyone with an Automatic transmission 2000-2001 Neon (Mine is a Plymouth); After you remove the plastic protector underneath, you will need to remove a metal plate used by the engine/transmission for support.
The metal plate has one small (10mm?) bolt that connects to the intake manifold, two 15mm bolts in the middle of the plate, and three 18mm bolts at the bottom. Remove them all and the plate to gain access to your starter's bottom bolt and to be able to remove the starter through the bottom.
Is the starter located in the same spot for a 04 dodge neon?
i think so... if you have 2 litter engine... not 2.4... witch are installed on SRT+4 model of neon...
Yes I have a 2.0
Yes, I really appreciate the help Mr. Gavrilov
@@gavrilovas1 a stick shift is in the same spot as well as long as its the same engine
Thanks a lot, good video........
herman58100 ;-) thank's...
Is it possible for u to make a tutorial video on this? Thank u ..... Awesome videos
spazibo za vache video.
Hey buddy I have a 2001 dodge neon and everything is basically the same only there is a plate bloccking the way of the bottom 15mm bolt any ideas? or do i have to remove that as well because its attached to a lot of other parts
I have this problem, too. Did you find a solution?
@@jwbaughyeah I ended up just taking it to the shop.. even they was like yeah that shouldn’t be there lol sadly I paid extra for the labor 😢
Thanks Dude
+Jeffrey Moore i said thks dude to , lol
thank you bro
I have replaced the starter as directed..BUT now there's an issue.i removed part of air box for easier access and reinstalled everything correctly bit as, soon as I start car it acts as if the accelerator is, pressed or the starter is on constant .burning up the starter to failure
50lxnando Are you sure that you connected all cables of the starter correctly? Beside that.. the throttle body hose have to be well tightened and connected on boss sides. also check all vacuum hoses...
50lxnando If throttle body hose or throttle body is not connected on this dodge neon the car will act like accelerator pedal is fully pressed , cause throttle body plate is completely open and maximum of air goes to the engine...
1999 dodge neon clutch
Thanks
thank you
how do get the plugged in wire loose
my sister has a 2002 Dodge neon I just remove the manifold and it was the starter was easy to get in and get out that's the way I did and crawl underneath car
that's good to know thank you for the comment.
Thks dude
Thx
Happy to help.
This helped a lot but too bad my neons dumped
I like how russians call objects him instead of it
NYC
i don't have a honda civic of this generation ;-(
There’s a whole bracket in my way that you don’t show and you don’t have
you might have different neon srt
need help changing starter on 2 .7 dodge stratus
This video will help you , to do so..
Thank you so very much
Nice accent
чувак на русском давай)
a way to far from me...
are you in russia with a dodge neon? who would want to import that piece of crap car
great video man thanks
Thank you
happy to help.